KOMPBERG® BSDF55 Screw Compressor

€29,800.00

Net

€35,462.00*

Product number: 1481100206
Manufacturer: BERG Kompressoren GmbH
Stock: 0
Product information "KOMPBERG® BSDF55 Screw Compressor "

All Our Compressors are equiped as Direct Drive

BERG has 1:1 direct drive screw compressors that named KOMPBERG®️ BSD series. An innovative, user-friendly concept totally geared to performance and economy.

Technical data "KOMPBERG® BSDF55 Screw Compressor "
Screw compressor with frequency converter BSDF 55
Overpressure [bar] - options 7,5 /10 /13
Variable capacity:  
Capacity min-max [m3/m] [ 7,5 bar ] 2.6 - 9.9
Capacity min-max [m3/m] [ 10 bar ] 2.5 - 8.5
Capacity min-max [m3/m] [ 13 bar ] 2.3 - 6.6
Dimension (LxWxH) [mm] 2000 x 1000 x 1640
Compressed air connection G 1 1/2
Weight [kg] 1140
Ambient temperature [°C] +5 - +40
Cooling air demand [m³/h] 8700
Compressed air temperature on the outlet [°C] approx.10 degrees above ambient temperature
Sound level L [dB(A)] 75
Power transmission system direct drive
Nominal motor power [kW] 55
Nominal fan motor power [kW] 1.5
Motor IP Code IP55
Feed voltage [V] 400
Recommended power feed cable [mm2 ] 3x50+PE
Protection fuse [A] 125
TDS "KOMPBERG® BSDF55 Screw Compressor "

Accesories

DRYBERG®️ RF13/AC Refrigeration dryer
Refrigeration dryer DRYBERG®️ RF13/AC equals to DRYPOINT®️ RA750/AC Minimum installation requirements: • Choose an area which is clean and dry, free from dust and protected against atmospheric disturbances. • The load-bearing zone must be even, horizontal and able to bear the weight of the dryer. • Minimum ambient temperature +1°C. • Maximum ambient temperature +50°C. • Ensure a proper cooling air replacement. • Allow a sufficient clearance on each side of the dryer for proper ventilation and to facilitate maintenance operations. The dryer does not require attachment to the floor surface.

Net €8,400.00 €9,996.00*
PUREBERG® F13(Type)W Compressed air filter, 750 Nm3/h at 7 bar
Filter type: Activated
Compressed air filter PUREBERG® F13(Type)W ,750 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter Innovative features mean outstanding performance without compromise  Compressed air filter PURBERG® housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons, odour vapours from com­pressed air systems. To meet the required com­pressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Housing prevents condensate from being picked up and "car­ried over" into the airstream. The BERG compressed air filter technolo­gy guarantees low operating costs, long service life, outstanding process reliability, and safe filtration.

Net €630.00 €749.70*
PUREBERG® F15WW Water separator, 888m3/h@7bar
Increase efficiency with PUREBERG F15WW Water Separator for Compressed Air Systems A water separator, also called a condensate separator, is a device that removes moisture and water from an air flow. In the area of air compressors and compressed air systems, the water separator is important to ensure that the air remains dry. Moisture in the compressed air can otherwise lead to problems such as rust, blocked lines and damage to machines. The water separator PUREBERG® F15WW, (888 m3/h at 7 bar) is a widely used example in the industry. The water separator works through various mechanisms to separate the condensate from the air. In most cases it uses centrifugal force or gravity to remove the water from the airflow. As the moist air flows through the separator, the water droplets are pulled out of the air by these forces and collect at the bottom of the separator. From there, the accumulated water can be removed from the system either manually or automatically. There are different types of water separators, including condensate separators for air compressors, compressed air lines or industrial applications. Choosing the right water separator for the device depends on various factors. This includes the flow rate, pressure, ambient temperature and the specific requirements of the program. In summary, the water separator is very important in compressed air systems. It helps to improve air quality, optimize operations and extend the life of machines. What happens if our compressed air systems do not have a proper water separator with condensate drainage, such as: B. BEKOMAT 20? A compressed air water separator without a suitable condensate drain like the BEKOMAT 20 causes several problems in your compressed air system: Contamination: Water and oil condensate can accumulate in the air system, leading to contamination of the compressed air. This can affect the quality of the compressed air and potentially damage downstream equipment and processes. Corrosion: Water in compressed air can corrode system components, resulting in shortened service life and failure. Reduced efficiency: Water in compressed air can reduce system performance and efficiency, resulting in increased energy consumption and higher operating costs. Maintenance issues: Without a proper water separator and condensate drain, you may need to manually drain condensate from the system, which can be time-consuming and may not be as effective as an automated system like the BEKOMAT 20. Overall, having a suitable water separator with a condensate drain is essential for maintaining the performance, efficiency, and reliability of your compressed air system.

Net €920.00 €1,094.80*
BEKOMAT® 20, BEKO condensate drain
BEKOMAT® Voltage: 115 VAC ± 10%, 50 - 60 Hz
BEKO condensate drain BEKOMAT® 20BEKOMAT® 20 | 20FM for Filters and water separators The BEKOMAT 20 is a strong condensate drain designed for use in water separators and air filters. It is suitable for oil-lubricated plants as well as oil-free compressors. The control panel is accessible from the top and the front. It has a plastic housing with integrated aluminum condensate container. The BEKOMAT 20 FM with integrated filter management is a cost effective monitoring solution for the service filters element. Here are some advantages and uses of the BEKOMAT 20: Efficient condensate drainage: The BEKOMAT 20 is designed to effectively remove condensate from compressed air systems, ensuring optimal performance and preventing damage to downstream equipment. Energy-saving: The unit operates based on demand, meaning it only activates when condensate needs to be drained, helping to reduce energy consumption. Easy maintenance: The BEKOMAT 20 is designed for easy installation and maintenance, making it user-friendly for operators. Reliable operation: Beko Technologies is known for producing high-quality products, and the BEKOMAT 20 is no exception, offering reliable performance in industrial applications.  BEKOMAT 20 Applications:Industrial compressed air systems: The BEKOMAT 20 is commonly used in industrial settings where compressed air is a critical component of operations, such as manufacturing plants, automotive facilities, and food processing plants. Air compressors: The unit can be installed in conjunction with air compressors to ensure efficient condensate removal and protect the integrity of the compressed air system. Pneumatic tools and equipment: The BEKOMAT 20 can help maintain the performance and longevity of pneumatic tools and equipment by preventing moisture buildup in the air supply. Overall, the BEKOMAT 20 is a reliable and efficient condensate drain unit that offers several advantages in maintaining the performance of compressed air systems.

Net €161.00 €191.59*
QWIK-PURE® 30, Oil water separator
QWIK-PURE ® Unique process, functional and future-proof Due to the innovative mode of operation, a maximum of process and functional reliability is achieved. The integrated control system permanently displays the remaining capacity and thus ensures transparency and plannability. It also guides you through the quick and easy cartridge change and helps with service tasks via a local WLAN network. And if the power should fail, the fail-safe function ensures safe operation. In this case, the QWIK-PURE® behaves like a conventional gravity separator. Qwik-Pure stands for optimal operational safety for conventional oil-water separators. This is ensured by the unique and intelligent operating principle and reliable monitoring by the device's electronic unit.

Net €2,248.20 €2,675.36*

All articles in this group

KOMPBERG® BSDF22 Screw Compressor
BERG MASTER CONTROLLER FOR GROUP OF SCREW COMPRESSORS BERG MASTER CONTROLLER Additional feature of the RC-S series master controllers that provides to duplicate the operator panel onto a PC or mobile devices. this feature can be implemented in both new controllers and the controllers that are already used to control a specific group of compressors. Master control unit RC is responsible for : Control of the start and stop system of the compressors installed in one compressed air network, Monitoring and ensuring correct pressure in the system, Optimum load distribution between individual compressors, Possibility of selecting the leading compressor, Setting pressure start and stop thresholds, Entering the parameters of the system regulation, Collection of information from the supervised system and its processing, and all signalling (in RC-S) Remote monitoring of the supervised system status by means of the installed interface operated in the web browser or/and by means of the Modbus TCP communication protocol (in Modbus RTU option via RS485),(in RC-S). The use of the RC- control unit of the compressor group eliminates the necessity of the machine operator intervention into settings and enables equal load distribution between compressors. Control of the screw compressor group is possible in the Sequence or cascade mode. √ The sequence control is recommended for the compressors of comparable size. Their operation time is usually equalized. √ The cascade control is dedicated to the machines of different sizes, where the one operates in a continuous way and the others operate only during peak demands for compressed air. 

Net €19,900.00 €23,681.00*
KOMPBERG® BSDF30 Screw Compressor
Why frequency control? Energy savings almost up to 35% Low fatigue and low depreciation Print optimization Reduction of discharge losses Lower power consumption leads to reduced CO2

Net €23,700.00 €28,203.00*
KOMPBERG® BSDF37 Screw Compressor
KOMPBERG®️ made from different effective parts> Large convenient and removable doors are fitted as standard on BERG Screw compressors and the housing provides adequate space for the convenient layout of the components. Reliable Direct drive, heavy-duty and consistently efficient. BERG design principles prevent reduced output and premature wear in this essential drive component. using the famous German components as well as high quality German filters, Siemens electromotor and controller.

Net €24,500.00 €29,155.00*
KOMPBERG® BSDF45 Screw Compressor
All Our Compressors are equiped as Direct Drive Drive 1:1 means that the Airend and motor are directly connected. This means that there are no transmission losses. BERG’s direct drive screw compressors deliver outstanding performance and make possible great savings in energy. The drive motor and the air end in one-to-one drive series compressors are designed to operate at the same low speed. This enables the drive and compression units to be linked via a maintenance-free coupling which avoids the transmission losses with gear-driven units. our direct drive compressor reduces the number of components needed in comparison with gear drive, significantly increasing reliability and service life. Sound levels are also considerably lower. The airend in each KOMPBERG®️ BSD model is designed to specifically match air demand and ensures outstanding efficiency through the low-speed operation.

Net €28,900.00 €34,391.00*
KOMPBERG®️ BSDF75 Screw Compressor
Screw Compressor KOMPBERG® BSDF75 Oil-injected screw compressors incorporate oil for lubrication and sealing purposes, ensuring smooth operation and prolonging equipment lifespan. Integrated refrigeration dryers are often included in screw compressor systems to eliminate moisture from compressed air, safeguarding against corrosion and maintaining air quality. Screw compressors are widely recognized for their exceptional efficiency, offering high compression ratios and minimal energy wastage. They typically operate within a pressure range of 7 to 13 bar, suitable for diverse industrial applications.These compressors are eligible for subsidies or incentives through programs like BAFA, which promotes energy efficiency and environmental protection. With features such as low operating costs, easy handling, and minimal energy consumption, screw compressors are favored in various industries for their reliability and cost-effectiveness. screw compressor KOMPBERG Centrifugal fan The high-efficiency fan with a higher compression ratio ensures effective cooling throughout the entire compressor operation time. High compression ratio ensures an appropriate, even flow of sucked ambient air, through the cooler, also in the case of cooler fouling. Centrifugal fan is driven by low-speed electrical motor, which considerably influences the compressor noise level.

Net €39,900.00 €47,481.00*
KOMPBERG®️ BSDF90 Screw Compressor
Monitoring and supervising of individual compressor MS Connect provides the remote work monitoring, supervision and changing of the basic operating parameters of the screw compressor equipped with the Siemens controller. Software is designed for installation on PCs of people responsible for maintaining work continuity and managing the operation of compressors.

Net €50,700.00 €60,333.00*
KOMPBERG®️ BSDF110 Screw Compressor
KOMPBERG®️ BSDF Description Frequency Control series compressors from BERG are exceptionally efficient variable speed screw compressors with Siemens inverter as well as energy-saving Siemens Controller provide outstanding performance throughout the entire control range.All BSDF Compressors model is capable of 100 % duty cycles without any additional maintenance required.These screw-type compressors have High economic efficiency, long service life, simple and cost-effective maintenance.

Net €59,800.00 €71,162.00*
KOMPBERG®️ BSDF132 Screw Compressor
Ultimate Efficiency with Our BSDF Ultimate Efficiency with our BSDF significantly increases reliability and service life, Direct drive reduces the number of components needed and eliminates the associated transmission losses. Sound levels are also considerably lower. Operation safety The frequency inverter is located in the separate and effectively cooled switchgear, which ensures good ventilation and protection against an influence of heat emitted by the compression module operation.

Net €67,900.00 €80,801.00*
KOMPBERG®️ BSDF160 Screw Compressor
KOMPBERG®️ BSDF Advantages - Compact Airends eliminating pipework and links with known sources of problems. - Efficient noise-insulated canopy and multiple anti-vibration mountings for minimization of noise and vibration levels. - Door panels are easily removed allowing ease of access to the individual components for servicing. - Use of standard components and maintaining high-quality standards and offering flexibility in the event of faults.

Net €87,600.00 €104,244.00*
KOMPBERG®️ BSDF200 Screw Compressor
We use the reliable supplier for inverters: SIEMENS Inverters have been amazingly reliable workhorses for over 25 years and no competitor drive boast a track record like that. The siemens inverters are microprocessor-controlled and use state-of-the-art Insulated Gate Bipolar transistor (IGBT) technology. This makes them reliable and versatile.   Even higher saving faster return on investment Higher motor efficiency up to 70%, further reduce the peripheral equipment losses connected with compressed air production Depreciation even in 4 months(in continuous running), and on average within 9 months from purchase A 1000 series inverter Asynchronous motor with the highest efficiency IE4 class Even higher environmental protection

Net €113,400.00 €134,946.00*
KOMPBERG®️ BSDF250 Screw Compressor
BERG CONTROLLER BERG CONTROLLER (SIEMENS controllers) is mostly supplying for BERG based on the modern technologies (microprocessor with the Cortex core), meet the recent industrial requirements with simultaneous minimum power consumption and correct, failure-free compressor operation. Easy to read display, information diodes and clear keyboard provide easy and fast configuration of operating parameters, diagnosis of the compressor operation state, as well as an operation mode selection. THE LEDS ON THE CONTROLLER INFORM THE OPERATING PERSONNEL ABOUT: Compressor operation mode, Motor operation status, Occurrence of any events User friendly world wide

Net €123,600.00 €147,084.00*