KOMPBERG®️ BKB22 Booster Compressor

€14,290.00

Net

€17,005.10*

Product number: 1481120310
Manufacturer: BERG Kompressoren GmbH
Stock: 0
Product information "KOMPBERG®️ BKB22 Booster Compressor "
Booster Compressor KOMPBERG®️ BKB22

Booster Compressor KOMPBERG®️ BKB Description

The compressor is intended for compressing air only. Its use to compress other gases requires prior agreement with machine manufacturer or vendor. Such agreement must be made in writing. The compressor may not be used for any purpose other than specified.


Booster Compressor KOMPBERG® BKB Technical Description
Applications
The KOMPBERG®️ series booster compressors are intended for boosting air pressure from 1-1.3 MPa (KOMPBERG®️ BKB22) on the suction side, to 2.5-4.0 MPa on the pressure side. The booster is provided with an oil filter and end cooler.
 
Main components
The booster compressor comprises an oil piston compressor with “V” cylinder arrangement at 90° angle. The compressor is driven by an electric motor with a belt transmission. A common frame supports the compressor, motor and air end cooler with fans and filters.
 
The compressor 
It is a one-stage, two-cylinder, one-sided compressor, with a "V" cylinder configuration and a 90 bifurcation angle.
A compressor carter with a tunnel structure is made as a cast iron cast. The lower part of the crankcase is at the same time an oil sump in which the oil suction filter is mounted. The oil filter is mounted on the oil pump.
Two cylinders with working valves are attached to the compressor's crankcase. The working valves are pressed against the heads of the head with adjustment screws through special pressure sleeves. In order to ensure more efficient heat dissipation, the cylinders and heads are suitably ribbed.
Crankshaft, cast of nodular cast iron with increased impact strength, is supported by two rolling bearings. On the one hand, the crankshaft has a conical tip for seating the pulley, while a gear-driven oil pump is driven from the other end of the shaft.
Two connecting rods with two-part thin-walled bushes are mounted on the surface hardened crank shaft.
Both cylinders on the intake are connected by a common intake manifold, and on the discharge by an air cooler.

 
 Electric motor 
The booster compressor is driven by a squirrel-cage, AC electric motor. The motor is designed for an intermittent run, for maximum 20 starts per hour. The compressor is driven by the motor via a belt transmission.
 
End cooler 
The cooler in the KOMPBERG®️ boosters is made of vertical ribbed steel tubes connected with horizontal collectors at the ends. The cooler has welded construction. In the upper cooler collectors, valves for draining condensate and a relief solenoid valve are provided. Air circulation in both solutions is forced by a fan driven by an electric motor.
 
Booster compressor frame 
The KOMPBERG®️ BKB22 booster frame, on which the motor and compressor are  supported, is made of plate and seated on four shock absorbers.
TDS "KOMPBERG®️ BKB22 Booster Compressor "

All articles in this group

KOMPBERG®️ BKB22 TWIN Booster Compressor
Booster Compressor 22 TWIN Description The compressor is intended for compressing air only. Its use to compress other gases requires prior agreement with machine manufacturer or vendor. Such agreement must be made in writing. The compressor may not be used for any purpose other than specified. Technical Description Booster Compressor 22 TWIN Applications The KOMPBERG®️ series booster compressors are intended for boosting air pressure from 1.0-1.3 MPa (KOMPBERG®️ BKB22 TWIN) on the suction side, to 2.5-4.0 MPa on the pressure side. The booster is provided with an oil filter and end cooler.   Main components The booster compressor comprises an oil piston compressor with “V” cylinder arrangement at 90° angle. The compressor is driven by an electric motor with a belt transmission. A common frame supports the compressor, motor and air end cooler with fans and filters.   The compressor  It is a single-stage compressor with two cylinders, one-side action, with “V” cylinder arrangement at 90° angle. The compressor has a tunelled iron cast crankcase. The crankcase bottom serves also as an oil sump with the oil suction filter built in. The oil filter is installed in the oil pump.  Two cylinders with valves are mounted to the crankcase. The valves are held in place in their seats in the head with adjustment bolts through special thrust sleeves. The cylinders have special ribs to ensure efficient heat removal. The crankshaft forged of increased impact-resistant steel is supported on two rolling bearings. On one side, the crankshaft is provided with a cone end for pulley mounting, whereas the other end drives the oil gear pump. On a skin-hardened crank pin of the shaft, two connecting rods with thin-wall double-split bearing bushings are mounted. There are no separate heads in the compressor, as the cylinder and head is a one-component iron cast. Both cylinders are linked with a common suction collector, at the inlet side, and with the air end cooler, at the outlet side.    Electric motor  The booster compressor is driven by a squirrel-cage, AC electric motor. The motor is designed for an intermittent run, for maximum 20 starts per hour. The compressor is driven by the motor via a belt transmission.   End cooler  The cooler in the KOMPBERG®️ boosters is made of vertical ribbed steel tubes connected with horizontal collectors at the ends. The cooler has welded construction. In the upper cooler collectors, valves for draining condensate and a relief solenoid valve are provided. Air circulation in both solutions is forced by a fan driven by an electric motor.   Booster compressor frame  The KOMPBERG®️ BKB22 TWIN booster frame, on which the motor and compressor are supported, is made of plate and seated on four shock absorbers.

Net €27,340.00 €32,534.60*
KOMPBERG®️ BKB 300 - 12 Booster Compressor
KOMPBERG®️ BKB 300 - 12 Booster Compressor A heavy-Duty Booster for High-pressure Air and Nitrogen Gas Applications High-pressure air and Nitrogen gas applications demand robust compression. The KOMPBERG BKB 300 not only meets but exceeds your performance needs. Built to German standards using quality components, this heavy-duty booster comes in various power sizes, offering a capacity from 85 to 750 I/s. BERG introduces a new series of systems with the BKB, blending impressive features with excellent value, even in its basic setup. These systems are available with pressures up to 300 bar, including booster versions. Coupled with diverse system options and a broad array of accessories, tailored solutions for nearly all air and nitrogen applications can be achieved. At its core lie BERG’s high-pressure blocks, renowned for their reliability and durability in the market. Engineered for industrial use, the system technology ensures optimal performance. A groundbreaking innovation is the B-APP, enabling real-time control and monitoring of the system via smartphone.

Net €29,600.00 €35,224.00*
KOMPBERG®️ BKB 300 - 17 Booster Compressor
KOMPBERG®️ BKB 300 - 17 Booster Compressor A heavy-Duty Booster for High-pressure Air and Nitrogen Gas Applications ADVANTAGES of BKB 300 Booster Compressor Low Noise:Reduced vibration achieved by isolating the compression block from the motor. Enhanced soundproofing for noise reduction. Cost-Effective Ownership:IE3 motor and self-tensioning V-belt offer superior energy efficiency. Durable piston rings and corrosion-resistant cooler pipes extend service intervals, minimizing maintenance costs. Dependable Performance:Designed for continuous operation, ensuring reliability. Integrated oil-water separators maintain high air and nitrogen quality. Automatic condensate drain reduces pressure losses and noise levels, enhancing efficiency and reliability.

Net €29,600.00 €35,224.00*
KOMPBERG®️ BKB 300 - 30 Booster Compressor
KOMPBERG®️ BKB 300 - 30 Booster Compressor A heavy-Duty Booster for High-pressure Air and Nitrogen Gas Applications ADVANTAGES of BKB 300 Booster Compressor Low Noise:Reduced vibration achieved by isolating the compression block from the motor. Enhanced soundproofing for noise reduction. Cost-Effective Ownership:IE3 motor and self-tensioning V-belt offer superior energy efficiency. Durable piston rings and corrosion-resistant cooler pipes extend service intervals, minimizing maintenance costs. Dependable Performance:Designed for continuous operation, ensuring reliability. Integrated oil-water separators maintain high air and nitrogen quality. Automatic condensate drain reduces pressure losses and noise levels, enhancing efficiency and reliability.

Net €38,900.00 €46,291.00*