METPOINT®️ BDL compact
Product number:
4027685
Manufacturer:
BEKO Technologies GmbH
Stock:
10
Product information "METPOINT®️ BDL compact"
METPOINT®️ BDL compact - compressed air data logger
Volume flow rate, pressure dew point, pressure, current efficiency
temperature and residual oil vapour content monitoring with just one measuring device
The cost-effective solution
The METPOINT®️ BDL compact compact is equipped with two to four sensor inputs optionally analog, digital or mixed. Two additional digital or analogue inputs are optionally available on request - e.g. for electricity meters or pressure sensors. Critical points in your processes are then displayed immediately. This reduces your reaction time and increases process and production safety levels. The compact screen recorder optionally provides a data logger with a 4 GB memory capacity.
Compressed air measurement equipment
The METPOINT BDL Compact is a cutting-edge compressed air measurement equipment designed to provide accurate and reliable data on the quality of compressed air systems. This compact device is equipped with advanced sensors and technology to monitor various parameters such as pressure, temperature, humidity, and flow rate.
One of the key features of the METPOINT BDL Compact is its user-friendly interface, which allows operators to easily configure and calibrate the device to suit their specific requirements. The device also comes with built-in data logging capabilities, enabling users to track and analyze the performance of their compressed air systems over time.
The METPOINT BDL Compact is known for its high level of accuracy and precision, making it a valuable tool for ensuring the efficient operation of compressed air systems. By monitoring key parameters such as pressure and flow rate, operators can identify potential issues and take proactive measures to prevent downtime and optimize energy consumption.
Overall, the METPOINT BDL Compact is a reliable and versatile compressed air measurement equipment that can help businesses improve the performance and efficiency of their compressed air systems. Its advanced features and user-friendly design make it a valuable asset for any organization looking to enhance the reliability and productivity of their compressed air systems.
All values in focus: BDL compact
temperature and residual oil vapour content monitoring with just one measuring device
The METPOINT®️ BDL compact is an innovative electronic screen writer for recording critical process parameters for e.g. compressed air and gas applications. The electronic recording system measures connected input signals and subsequently evaluates the required information for the respective application. These are displayed and saved on the device. The process occurrence can be archived on a long-term basis and alarms can be forwarded to superordinated systems. The screen recorder thereby enables process-oriented assessment of the processes and, if necessary, rapid on-site intervention.
The METPOINT®️ BDL compact is versatile and flexible. An optimal solution, among others, for food and pharmaceutical industries, for quality assurance and production as well as for environmental and climatic measuring technologies. Intelligent and cost-effective complete solutions can be implemented by utilising these compact systems in plant, system and apparatus engineering.
The cost-effective solution
BDL compact
The METPOINT®️ BDL compact compact is equipped with two to four sensor inputs optionally analog, digital or mixed. Two additional digital or analogue inputs are optionally available on request - e.g. for electricity meters or pressure sensors. Critical points in your processes are then displayed immediately. This reduces your reaction time and increases process and production safety levels. The compact screen recorder optionally provides a data logger with a 4 GB memory capacity.
Technical data "METPOINT®️ BDL compact"
| Dimensions (mm) | 180 x 166 x 115 (width / height / depth) |
| Operating temperatur | 0 … +50 °C |
| Power supply | 100 … 240 VAC / 50 ... 60 Hz / max 10 VA |
| Sensor inputs | 2 inputs for dew point and consumption probes (optional 2 analog inputs) |
| keyboard | 3.5" touchpanel TCT transmissive |
| Alarm output | 2 relays, potential-free, change-over contacts |
| Analog output | Connection of the 4 ... 20 mA signals of the dew point and Consumption sensors, (max load <500 Ω) |
| Integrierter Datenlogger | 4 GB SD Memory Card Standard (micro SDHC class 4) |
Downloads "METPOINT®️ BDL compact"
TDS "METPOINT®️ BDL compact"
Accesories
METPOINT®️ FLM with LED
Net €2,895.00
€3,445.05*
LED - volume flow measurement
Description METPOINT®️ FLM
In order for compressed air systems to operate reliably efficiently and ecologically precise determination of current volume flow Is required. Especially practical the thermal flow meter METPOINT®️ FLM. It is simply and quickly integrated into the existing system under pressure by means of a standard process fitting and using this tool aligned in the direction of the gas flow. Next, It is inserted into the exact center of the pipe that's it the gas flows ideally past the measuring device meaning these temperature sensors the first Measures the current temperature the second is heated to a higher temperature exactly 40 °C hotter than the first As the mass flow increases it would normally cool but an electric heating element prevents that from occurring the electrical energy required to maintain the temperature indifference is that directly proportional to the mass flow increases The electric heaters thermal performance also increases and is converted into the appropriate measured value. Based on these values and the pipes inner diameter the METPOINT®️ FLM Precisely calculators the volume flow.
METPOINT FLM: Sensor technology for volume flow measurement
Every third compressor is only operated to compensate for air losses. These costs are largely avoidable. One possibility to avoid these costs is precise acquisition of the current volume flow. This then provides the basis for many important analyses, documentation and decisions. BEKO TECHNOLOGIES provides end-position monitoring with the FLM SF13 and SF53.
Is your production set up as optimally economical?
You can only comprehensively answer this question when the current volume flowrequirement for your compressed air has been identified. This can be evaluated for you by the FLM volume flow measuring system and thereby provides you with the data basis you need for intelligent energy management. Identify potential savings, overloads and weak points in your system to improve its efficiency. By measuring the actual flow to the various production units, you are in a position to make decisions based on facts. At the same time, the FLM lets them know whether there are any leaks in their system. The measurement thereby provides you with all the necessary data you need to jointly coordinate components in the best possible way and design systems economically.
The FLM SF13 variant is available with measuring sections of different diameters and comes with a calibration certificate for the selected pipe diameter. The METPOINT FLM SF53 is pre-calibrated as a universal sensor to a pipe diameter of 53.1 mm, but can be adjusted/calibrated to other diameters on customer request.
METPOINT®️ FLM with LED
The less expensive LED variant indicates the need for a new calibration (annually). Please note: The sensor configuration can only be done during production or later via the BDL datalogger
Function METPOINT®️ FLM
Two temperature sensors are installed in series in the direction of flow. The first temperature sensor measures the current process temperature of the compressed air, while the second sensor is electrically heated to a temperature that is 40 K higher than that of the first sensor. Higher volume flows results in a quicker drop in temperature at the sensors, so that the electric heater of the second sensor must increase its heat output. The electric energy required to maintain the temperature difference is proportional to the volume flow. This energy consumption is converted to provide the relevant flow measurements.
METPOINT®️ FLM with display
Net €3,257.00
€3,875.83*
Display - volume flow measurement
Description METPOINT®️ FLM
In order for compressed air systems to operate reliably efficiently and ecologically precise determination of current volume flow Is required. Especially practical the thermal flow meter METPOINT®️ FLM. It is simply and quickly integrated into the existing system under pressure by means of a standard process fitting and using this tool aligned in the direction of the gas flow. Next, It is inserted into the exact center of the pipe that's it the gas flows ideally past the measuring device meaning these temperature sensors the first Measures the current temperature the second is heated to a higher temperature exactly 40 °C hotter than the first As the mass flow increases it would normally cool but an electric heating element prevents that from occurring the electrical energy required to maintain the temperature indifference is that directly proportional to the mass flow increases The electric heaters thermal performance also increases and is converted into the appropriate measured value. Based on these values and the pipes inner diameter the METPOINT®️ FLM Precisely calculators the volume flow.
METPOINT FLM: Sensor technology for volume flow measurement
Every third compressor is only operated to compensate for air losses. These costs are largely avoidable. One possibility to avoid these costs is precise acquisition of the current volume flow. This then provides the basis for many important analyses, documentation and decisions. BEKO TECHNOLOGIES provides end-position monitoring with the FLM SF13 and SF53.
Is your production set up as optimally economical?
You can only comprehensively answer this question when the current volume flowrequirement for your compressed air has been identified. This can be evaluated for you by the FLM volume flow measuring system and thereby provides you with the data basis you need for intelligent energy management. Identify potential savings, overloads and weak points in your system to improve its efficiency. By measuring the actual flow to the various production units, you are in a position to make decisions based on facts. At the same time, the FLM lets them know whether there are any leaks in their system. The measurement thereby provides you with all the necessary data you need to jointly coordinate components in the best possible way and design systems economically.
The FLM SF13 variant is available with measuring sections of different diameters and comes with a calibration certificate for the selected pipe diameter. The METPOINT FLM SF53 is pre-calibrated as a universal sensor to a pipe diameter of 53.1 mm, but can be adjusted/calibrated to other diameters on customer request.
METPOINT®️ FLM with display
With the display and configuration menu, all measured values can be displayed and sensor settings can be made
Function METPOINT®️ FLM with display
Two temperature sensors are installed in series in the direction of flow. The first temperature sensor measures the current process temperature of the compressed air, while the second sensor is electrically heated to a temperature that is 40 K higher than that of the first sensor. Higher volume flows results in a quicker drop in temperature at the sensors, so that the electric heater of the second sensor must increase its heat output. The electric energy required to maintain the temperature difference is proportional to the volume flow. This energy consumption is converted to provide the relevant flow measurements.
All articles in this group
FA 515 - Dew point sensor
Net €1,427.00
€1,698.13*
FA 515 - Dew point sensor
FA 510/515 - Dew point sensor for adsorption dryers
Monitoring a desiccant dryer is critical to increase energy efficiency, ensure product quality, prevent damage to machinery, identify maintenance needs, and achieve cost savings. This contributes to the smooth operation of compressed air systems in various industrial applications. The sensor technology and evaluation electronics of our sensors have undergone continuous improvements. This implies an increased precision at varying ambient temperatures and a higher signal resolution of the sensor. Similar to their predecessor models, the new dew point sensors are characterized by long-lasting stable and reliable measurement results. The sensor element is insensitive to condensation and is protected from direct contact with contaminated particles by the stainless-steel sintered cap.
Special features:
Extremely stable in the long term Analog output 4...20 mA for dew point Condensation-resistant Quick adaption time Pressure-tight up to 350 bar (special
version) NEW: Modbus-RTU interface NEW: Higher resolution of sensor signal
due to the improved evaluation electronics NEW: Sensor diagnosis on site with a portable device or CS Service Software
DP 510 - Portable dew point meter with third-party sensor
From
Net €2,884.00
€3,431.96*
DEW POINT DP 500/510 - Mobile dew point meters with data logger
Description
Order-No.
Set DP 500
0600 0500
Set DP 510
0600 0510
Versatile and Reliable Dew Point
The CS Instruments DP 510 portable dew point meter is a versatile and reliable device designed to accurately measure and monitor the dew point in compressed air and gases. With its compact and portable design, the DP 510 is ideal for on-site measurements in various industrial applications. The key feature of the DP 510 is its ability to provide precise and real-time dew point readings, allowing users to ensure the quality of their compressed air systems and prevent potential issues such as condensation and corrosion. Equipped with advanced sensors and a user-friendly interface, the DP 510 from CS Instruments offers a convenient and efficient solution for monitoring dew point levels with precision and reliability.
Set DP 510 in a case - consisting of
Mobile dew point meter DP 510 with one additional input for external sensors
Mobile measuring chamber up to 16 bar
Diffusion-tight PTFE hose with quick coupling, length 1 m
Power supply for DP 500/DP 510
Control and calibration set 11.3% RH
Quick-lock coupling
Dry container for CS dew point sensors
Transportation case (large) for DP 510 as well as other sensors
Applications:
• Compressed air: Examination of refrigeration, membrane, adsorption dryers
• Technical gases: Residual moisture measurement in gases such as N2, O2 etc.
• Plastics industry: Examination of granulate dryers
Special features:
• Precise dew point measurement down to -80 °Ctd • Quick response time
• 3.5" graphic display / easy operation via touch screen
• Integrated data logger for storage of the measured values • USB interface for reading out via USB stick
• Calculates all necessary moisture parameters like g/m³, mg/m³, ppm V/V, g/kg, °Ctdatm
• 2nd freely assignable sensor input for third-party sensors (only DP 510)
• International: up to 8 languages selectable
METPOINT®️ BDL portable
Net €1,673.00
€1,990.87*
METPOINT®️ BDL portable - mobile data logger
Mobile data recording METPOINT®️ BDL portabl
The new METPOINT® BDL portable is a universally employable hand-held measuring device for many applications in the industry like, for example:Consumption/flow measurement Pressure/vacuum measurement Temperature measurement Residual moisture/dew point measurement
With the 3.5" graphics display with a touch screen, operation is very easy.
The graphical presentation of the coloured measuring curve is unique.
Up to 100 million measured values can be stored with a date and measuring point.
The measured values can be transmitted to the PC via USB stick.
Advantages of METPOINT® BDL portable
Portable data recording Flexible graphical representation Integrated data logger USB interface Intuitive control Extended accumulator time 3/5” touch screen Universal sensor inputs Rapid set up time
METPOINT®️ BDL p. with DPM Set
Net €3,059.00
€3,640.21*
METPOINT®️ BDL p. with DPM Set - mobile data logger
Mobile data recording METPOINT® BDL portable set
› Mobile data logger BDL portable
› DPM SD23 dew point transmitter with dry protection sleeve
› MK-Basic-PN16 measuring chamber with quick-release coupling
› Power supply unit
› LiCl 11,3% RH control and calibration kit
› 5m connecting cable with quick-release coupling for SD23
› Sturdy transport case
METPOINT®️ BDL portable
One can see quality – one just needs to record it
The portable METPOINT BDL data logger allows for the quick and easy measurement and evaluation of your compressed air quality – at any point in your system. This universal hand-head device with integrated data logger has been specially designed for the recording of key parameters, such as consumption and flow rate, pressure, temperature, residual humidity and pressure dew point. All process data is converted into user-friendly statistics and charts. Up to 100 million measurements together with the time and location of measurement can be stored and called up in the form of characteristics in colours.
The universal sensor inputs are compatible with all conventional industrial transducers. The device comes with a 3.5" touch screen and intuitive user interface. Other great features of the compact METPOINT® BDL portable are its integrated data logger, the colour display of characteristics for analysis and various interpretation functions. All measurements can be transferred with an USB memory stick to a PC for further evaluation by means of the METPOINT® READER SW201 evaluation software. You can monitor the performance of your system in real time and take action when needed. With the METPOINT® BDL portable, you have the data you need at your fingertips.
ISO 8573 oil class information with dew point sensor METPOINT BDL p. with DPM set
The Metpoint BDL p. dew point sensor with DPM set is a high-performance device designed to accurately measure the dew point of compressed air. This sensor is capable of providing valuable information regarding the moisture content of the compressed air, which is crucial for maintaining the quality and performance of the compressed air system.
In addition to measuring the dew point of compressed air, the Metpoint BDL P sensor with DPM set can also be used to determine the oil content in the compressed air. By analyzing the moisture and oil content of the compressed air, users can obtain important data that can be used to classify the quality of the compressed air according to ISO 8573 standards.
ISO 8573 is an international standard that defines the purity classes of compressed air based on the levels of contaminants present, including particles, water, and oil. By using the dew point sensor with DPM set in conjunction with other monitoring devices, users can accurately assess the quality of the compressed air and determine its ISO 8573 oil class classification.
Overall, the Metpoint BDL P dew point sensor with DPM set provides valuable information regarding the moisture and oil content of compressed air, enabling users to maintain high-quality compressed air systems that meet ISO 8573 standards for purity and performance.
METPOINT®️ DPM SD23 with BDL compact
Net €2,781.00
€3,309.39*
METPOINT®️ DPM SD23 with BDL compact - data logger
- DPM SD23 dew point trasmitter
- Data logger METPOINT®️ BDL compact 2D
- MK-Basic-PN16 Measuring chamber with quick-release coupling NW 7.2 plug nipple
- parameterized and fully assembled
- Connecting cable (5m)
METPOINT®️ DPM: Sensor technology for precise pressure dew point measurement
Humidity in compressed air applications is a problem and can, in most cases, damage the system and contaminate end products. The ideal instrument for monitoring residual moisture is the pressure dewpoint sensor METPOINT DPM. Our sensor technology enables you to accurately measure the degree of humidity or the pressure dew point at critical flow points in your compressed air system. This information is indispensable for operators who want to improve the quality of their compressed air whilst saving energy and costs.
How can provide the high quality dry compressed air in our production process:
The METPOINT DPM is a dew point monitor designed to help compressed air systems maintain high-quality dry compressed air. Dew point is a critical parameter in compressed air systems as it indicates the level of moisture present in the compressed air. Excessive moisture can lead to corrosion, contamination, and reduced efficiency in pneumatic equipment.
The METPOINT DPM continuously monitors the dew point of the compressed air, providing real-time data on the moisture content. By accurately measuring the dew point, the METPOINT DPM allows operators to identify potential issues such as condensation, water vapor, or leaks in the system that could compromise the quality of the compressed air.
By monitoring and controlling the dew point, the METPOINT DPM helps compressed air systems maintain optimal conditions for producing high-quality dry compressed air. This ensures that the compressed air is free from moisture and contaminants, reducing the risk of equipment damage and performance issues.
Overall, the METPOINT DPM plays a crucial role in ensuring the reliability and efficiency of compressed air systems by helping to maintain high-quality dry compressed air. Its accurate monitoring capabilities enable operators to take proactive measures to prevent issues related to moisture and ensure the smooth operation of their compressed air systems.
METPOINT®️ DPM stationary pressure dew point transmitter measures the most critical parameters for compressed air and technical gases i.e. temperature, relative humidity and dew point (down to -60 °Ctd).
But that is not all: The METPOINT®️ DPM sensor provides information regarding the functional capabilities for components and the measurement provides the basic data for the optimum dimensioning for your system. The METPOINT®️ DPM sensor is therefore not just a safety guarantee in your process chain, rather also an instrument for increasing production efficiency.
Make quality visible – by recording it
The METPOINT®️ BDL compact data logger is a compact device with powerful measuring and evaluation functions, including instant alarms in the case of exceedances. It measures all key quality parameters for compressed air and enables you to evaluate the efficiency of your system by identifying hidden cost drivers. User-friendly statistics and charts provide the information you need for effective quality and energy management.
The METPOINT®️ BDL compact features two sensor inputs. On request, it is available with two additional digital or analog inputs, e.g. for power meters or pressure sensors. All critical parameters of your processes can be called up on the screen, so that you can intervene without delay if required. The compact device can be equipped with a 2 GB data logger, so that you can track performance over time, which is a prerequisite for continuous quality and efficiency improvement.