KOMPBERG® BSDKF13 Stationary Screw Compressor
Product number:
1421100109
Manufacturer:
BERG Kompressoren GmbH
Stock:
0
Product information "KOMPBERG® BSDKF13 Stationary Screw Compressor "
STATIONARY SCREW COMPRESSORS
parameters of the serie:• energy saving
• high efficiency
• no gear box or belt transmission
• energy optimized cooling system
• reliability – reduction number of components and use age of integrated parts
• very low vibrations
• low noise level
• low speed machine – life time of up to 80 000 working hours
Technical data "KOMPBERG® BSDKF13 Stationary Screw Compressor "
| Stationary Screw Compressor | BSDKF 13 |
| Operation over pressure [bar] min-max | 6 - 9 |
| Variable capacity: | |
| Capacity min-max [m3/m] [ 6 bar ] | 1,1 - 2,2 |
| Capacity min-max [m3/m] [ 7 bar ] | 1,0 - 2,1 |
| Capacity min-max [m3/m] [ 8 bar ] | 0,9 - 1,9 |
| Capacity min-max [m3/m] [ 9 bar ] | 0,9 - 1,8 |
| Ambient temperature | +5°C … +40°C |
| Voltage, Frequency | 400 V / 50 Hz |
| Air end | BERG B 100 |
| Noise level [dB(a)] | 63 - 70 |
| Electric motor protection class | IP 55‐F |
| Weight receiver mounted [kg] | 430 |
| Dimensions receiver mounted (LxWxH) [mm] | 1995 x 764 x 771 |
| Nominal motor power [kW] | 13 |
| Rated amps [A] | 21,2 |
| Oil filling [I] | 6 |
| Oil content in compressed air [mg/m3] | 2 - 4 |
| Electric motor speed [min-1] | Min.RPM ‐ 1540 [9,0 bar] Max.RPM – 3645 min‐1 [6,0 bar] |
| Receiver [l] | 500 |
| Outlet [I] | G 3/4" |
Downloads "KOMPBERG® BSDKF13 Stationary Screw Compressor "
Technical Data Stationary Screw Compressor KOMPBERG® BSDKF13, PDF( Size: 530 KB )
Stationary Screw Compressor KOMPBERG® BSDKF13 Operation and maintenance manual, PDF( Size: 650 kB )
Instructions and Advices to use the electronic controller - Logik 26-S, PDF( Size: 900 KB )
Operating Guide VLT® Midi Drive FC 280 , PDF( Size: 4 MB )
Spare parts and maintenance kit Screw Compressor KOMPBERG® BSDKF13 (Size: 168 KB )
Stationary Screw Compressor KOMPBERG® BSDKF13 Operation and maintenance manual, PDF( Size: 650 kB )
Instructions and Advices to use the electronic controller - Logik 26-S, PDF( Size: 900 KB )
Operating Guide VLT® Midi Drive FC 280 , PDF( Size: 4 MB )
Spare parts and maintenance kit Screw Compressor KOMPBERG® BSDKF13 (Size: 168 KB )
TDS "KOMPBERG® BSDKF13 Stationary Screw Compressor "
All articles in this group
KOMPBERG® BSDK5 Stationary Screw Compressor
Net €6,640.00
€7,901.60*
KOMPBERG® BSDK5
We are using a large low speed air end for relative small compressors. The electric motor is directly coupled to the main air end rotor, which essentially reduces the maintenance cost, in contrast with the belt driven compressor or a compressor with gear box. Compressor output is controlled either by an on/off switch, depending on the pressure in the air chamber or by classic suction regulator with a new control system depending on the pressure level, or possibly by advanced continuous regulation of operation, which optimists the machine’s performance parameters in real time by smoothly changing revolutions depending on the volume of discharged compressed air.
KOMPBERG® BSDKF11 Stationary Screw Compressor
Net €11,270.00
€13,411.30*
Direct Drive
KOMPBERG BSDKF11 from 11 kW are delivered with steel canopy. It acts as sound muffler and also directs the flow of cooling air that removes heat from the compressor. The compressor is thus protected against overheating. The canopy can be easily connected to the air ducting and allows unrestricted service access.
KOMPBERG® BSDKF13 Stationary Screw Compressor
Net €13,590.00
€16,172.10*
STATIONARY SCREW COMPRESSORS
parameters of the serie:
• energy saving
• high efficiency
• no gear box or belt transmission
• energy optimized cooling system
• reliability – reduction number of components and use age of integrated parts
• very low vibrations
• low noise level
• low speed machine – life time of up to 80 000 working hours
Top
KOMPBERG® BSDKF15 Stationary Screw Compressor
Net €15,240.00
€18,135.60*
Stationary Screw Compressor BSDKF15 is specially developed for:
professional workshops
small manufactures, garages, painting shops
carpentry industry
furniture production
packaging plants.
Common parameters of the series:
energy saving – no idle run
high efficiency
no gearbox or belt transmission
energy optimized cooling system
reliability – reduction number of components and usage of integrated parts
very low vibrations
low speed machine – life time of up to 80 000 working hours
low noise level
KOMPBERG® BSDKF20 Stationary Screw Compressor
Net €16,780.00
€19,968.20*
KOMPBERG® BSDKF Stationary screw compressor model BSDKF Designed for you who can use it professionally in small environments such as your home or workplace.
One of the main benefits of BSDK range is low noise level in contrast with piston compressors and our competitors.
KOMPBERG® BSDKF7 Stationary Screw Compressor
Net €9,930.00
€11,816.70*
Open machines without canopy
The BERG screw block is of robust construction and it is designed with a power reserve. The machines BSDK5 - BSDKF7 work at very low speeds and are therefore very quiet. These machines can be operated without canopy. The open version offers excellent service access.