€3,285.00
Net€3,909.15*
Product number:
4055894
Manufacturer:
BEKO Technologies GmbH
Stock:
10
Product information "QWIK-PURE® 60, Oil water separator"
QWIK-PURE ® Extremely flexible and future-proof
The integrated Modbus interface enables integration into higher-level monitoring and control systems and provides additional future-proofing thanks to its IIOT capability.A modular concept allows the number of cartridges to be flexibly adjusted to individual requirements, with up to 6 cartridges per system. This ensures optimal condensate treatment for all applications, with a quick change time of under 10 minutes, supported by the optimized guided service flow for clean cartridge changes.
Technical data "QWIK-PURE® 60, Oil water separator"
| Technical Data QWIK-PURE® 60, Oil water separator | |
| Operating mode | active |
| Maximum condensate flow | 76 l/h |
| Condensate inlet connection | 3 x G1/2", outside | 1 x G1", outside | Hose nozzle |
| Condensate drain connection | 1 x 23 mm (0.91 in), outside, Hose nozzle |
| Media | Compressor condensate, oily |
| Maximum oil concentration at condensate drain | 20mg/l |
| Maximum operating pressure at condensate inlet | 16 bar(g) |
| Minimum / maximum operating temperature, Fluids and environment | +5 … +50 °C |
| Relative humidity of the environment | ≤10 … 80 %, Without condensation |
| Weight | 45 Kg |
| Number of replacement cartridges | 4 |
| Technical data of the control unit FRC | |
| Minimum / maximum operating pressure, compressed air | 3 … 15 bar(g) |
| Cleanliness class, compressed air | 2:4:2 |
| Connection, compressed air | 8 mm (0.31 in), outside, Hose nozzle |
| Operating voltage | 90 … 264 VAC / 24 VDC |
| Frequency range | 50 … 60 Hz |
| Power consumption | 10 VA |
| Protection class | IP54 |
TDS "QWIK-PURE® 60, Oil water separator"