BEKOMAT® 6 CO EX BEKO condensate drain
Product number:
4004954
Manufacturer:
BEKO Technologies GmbH
Stock:
10
Product information "BEKOMAT® 6 CO EX BEKO condensate drain "
BEKO condensate drain BEKOMAT® 6 CO EX
Condensate drainage without loss of compressed air
If a float arrester leaks, high costs arise as a result of leaks. Time-controlled solenoid valves also cause compressed air losses. During the valve opening expensive compressed air escapes unused into the environment. In contrast, a condensate drain with electronic level control guarantees draining without compressed air, ie energy loss. This not only saves energy and costs, but also CO 2 emissions.This is a fantastic condansate drainage without loss of compressed air.Function Of BEKOMAT® 6 CO EX
Empty state:
Condensate drips through the inlet opening 1- and collects in the container 2- The diaphragm valve 5- is closed because the pressure equalization across the valve diaphragm via the pilot line 3- and the solenoid valve 4- 5- takes place. The larger area above the membrane causes a high closing force. The valve seat remains closed without leaks.
Filled state:
If the container 2- is filled with condensate so that the capacitive level sensor 6- reports a signal at the maximum point, the solenoid valve is switched and the area above the valve membrane is vented. The valve membrane lifts off the valve seat 7-, the overpressure in the housing pushes the condensate into the outlet line 8- The valve is closed leak-free before the compressed air escapes. If the condensate drain is disturbed (blocked drain line, defective membrane), the alarm mode is triggered after 60 seconds. The LED flashes, a fault message can be picked up as a potential-free signal via the alarm relay. With Ex devices this is possible via a built-in optocoupler and a switching amplifier. In this state, the solenoid valve is opened for 7.5 seconds every 4 minutes. A BEKOMAT® filled in a pressureless state is automatically alarm-free again under pressure. The drained condensate is now sent to the ÖWAMAT® oil-water separator for disperse condensate for treatment. In the case of stable emulsions, we recommend the BEKOSPLIT® splitting system for almost waste-free processing. Both systems offer legally compliant process technology for treating your compressed air condensate.
Condensate drips through the inlet opening 1- and collects in the container 2- The diaphragm valve 5- is closed because the pressure equalization across the valve diaphragm via the pilot line 3- and the solenoid valve 4- 5- takes place. The larger area above the membrane causes a high closing force. The valve seat remains closed without leaks.
Filled state:
If the container 2- is filled with condensate so that the capacitive level sensor 6- reports a signal at the maximum point, the solenoid valve is switched and the area above the valve membrane is vented. The valve membrane lifts off the valve seat 7-, the overpressure in the housing pushes the condensate into the outlet line 8- The valve is closed leak-free before the compressed air escapes. If the condensate drain is disturbed (blocked drain line, defective membrane), the alarm mode is triggered after 60 seconds. The LED flashes, a fault message can be picked up as a potential-free signal via the alarm relay. With Ex devices this is possible via a built-in optocoupler and a switching amplifier. In this state, the solenoid valve is opened for 7.5 seconds every 4 minutes. A BEKOMAT® filled in a pressureless state is automatically alarm-free again under pressure. The drained condensate is now sent to the ÖWAMAT® oil-water separator for disperse condensate for treatment. In the case of stable emulsions, we recommend the BEKOSPLIT® splitting system for almost waste-free processing. Both systems offer legally compliant process technology for treating your compressed air condensate.
Technical data "BEKOMAT® 6 CO EX BEKO condensate drain "
| BEKOMAT® | BEKOMAT® 6 CO EX |
| Compressor Capacity [m³/min] | 1000 |
| Voltage | 12 VDC |
| Operating pressure [bar] | 0.8 - 16 |
| Temperature [°C] | +1 bis + 60 |
| Condensate feed | 2 x G¾ | 1x G1 |
| Dimenstions B x T x H [mm] | 260 x 280 x 295 |
| Weight [kg] | ca. 5,0 |
| Application | Oil-contaminated condensate | oil-free, often aggressive condensate |
Downloads "BEKOMAT® 6 CO EX BEKO condensate drain "
TDS "BEKOMAT® 6 CO EX BEKO condensate drain "
Accessories
Service unit for BEKOMAT® 6 CO, 6 E 25
Net €125.00
€148.75*
Service unit for BEKOMAT 6 CO, 6 E 25:
2800702 (XEKA03047)
Service unit BEKOMAT®
Details information
For BEKOMAT®
6 CO
Preis (€)
6 E 25
Preis (€)
Wearing part set
2800670 (XEKA03015)
88
2800702 (XEKA03047)
125
Diaphragms 3 pcs
4002451 (XEKA00020) (4053197)
148
2000439
160
Sealing kit
2800658 (XEKA03003)
26
2800703 (XEKA03048)
50
Top cover
2800661 (XEKA03006)
90
2800690 (XEKA03035)
90
Service air valve
2800663 (XEKA03008)
91
2800717 (XEKA03062)
110
Control air cap
2800665 (XEKA03010)
34
-
-
Valve
2800664 (XEKA03009)
214
2800705 (XEKA03050)
446
Upper housing
2800789 (XEKA06001)
423
-
-
Bottom housing
2800790 (XEKA06002)
975
-
-
Sensor board 230 VAC
2800796 (XEKA06008)
341
2800796 (XEKA06008)
341
Sensor board 100 VAC
-
-
-
-
Sensor board 110 VAC
2800804 (XEKA06016)
341
2800804 (XEKA06016)
341
Sensor board 24 VAC
4010781 (XEKA06017)
342
4010781 (XEKA06017)
342
Sensor board 24 VDC
2800806 (XEKA06018)
341
2800806 (XEKA06018)
341
Variants from €30.94*
All articles in this group
BEKOMAT® 12, 12CO, 12CO PN 63, BEKO condensate drain
Net €389.00
€462.91*
BEKO condensate drain BEKOMAT® 12, 12CO, 12CO PN63Cost-effective and reliable: BEKOMAT® standard units
The BEKOMAT® range provides the 12, 13, 14 and BEKOMAT® 16 standard units for virtually every application, which are not just the correct solution, rather more also the most suitable low-energy solution. The integrated capacitive sensor for volume-controlled condensate discharge helps save energy and enhances efficiency – which is what you would expect from BEKOMAT.
The BEKOMAT 12 is a standard condensate drain unit designed for a wide range of applications in compressed air systems. It is known for its energy-efficient operation and reliable performance in removing condensate from compressed air systems to ensure clean and dry air for various industrial processes. Here are some key specifications and features of the BEKOMAT 12: Energy Efficiency: The BEKOMAT 12 is equipped with an integrated capacitive sensor for volume-controlled condensate discharge, which helps save energy by ensuring that only the necessary amount of condensate is discharged. This feature enhances efficiency and reduces energy consumption compared to traditional drain systems. Robust Construction: The BEKOMAT 12 is built with high-quality materials and components to withstand harsh operating conditions in industrial environments. Its durable construction ensures long-term reliability and performance in demanding applications. Easy Installation and Maintenance: The BEKOMAT 12 is designed for easy installation and maintenance, making it convenient for users to set up and operate the unit with minimal effort. Routine maintenance tasks such as draining condensate and cleaning the unit can be performed quickly and easily. Wide Application Range: The BEKOMAT 12 is suitable for a variety of applications in industries such as automotive, food and beverage, pharmaceutical, manufacturing, and more. It can effectively remove condensate from compressed air systems to maintain air quality and prevent damage to downstream equipment.
Overall, the BEKOMAT 12 is a reliable and energy-efficient condensate drain unit that offers superior performance and efficiency for a wide range of industrial applications. Its advanced features and robust construction make it an ideal choice for ensuring the quality and reliability of compressed air systems in various industries.
Top
BEKOMAT® 13, 13CO, 13 CO PN 50 , BEKO condensate drain
Net €553.00
€658.07*
BEKO condensate drain BEKOMAT® 13, 13CO, 13 CO PN 50
how can you prevent condensate damage to your compressed air system whilst saving energy and adapted to the amount of condensate without loss of compressed air These are the proven strength of a bekomat but exactly how does it work Adapted to the amount of condensate and without compressed air loss Condensate flows in via the feed line whilst air pressure from the vent pipe keeps the membrane closed from above a capacitive sensor constantly monitors the condensate. When the condensate reaches a preset level the control unit immediately initiates the draining of the condensate. Once again as the condensate flows in the membrane remains closed due to system pressure it's larger upper surface provides the necessary closing force on the valve seat and seals it tightly when the bekomat is full the solenoid valve is activated and the space above the membrane is vented. Simultaneously the pressure on the underside increases allowing the condensate to flow into the outlet line. in actual operation the solenoid valve switches so quickly that no valuable compressed air escapes. The bekomat® drains the condensate into the owamat Oil water separator mounted downstream adapted to the amount of condensate and without compressed air loss.
Cost-effective and reliable: BEKOMAT® standard units
The standard design is made in corrosion-resistant aluminium, which makes the BEKOMAT® particularly reliable and robust. A silver-coloured coating protects the outside of the housing. The BEKOMAT® CO models are predestined for operating with oil-free or aggressive condensates. Their housing is additionally, completely glass bead blasted and protected by a high-quality hard coating.
Measures:
• Do not exceed the maximum operating pressure (see type plate)!
• Only carry out service measures when the system is pressure less.
• Use pressure-resistant installation material only.
• The feed pipe must be tubed firmly. Discharge pipe: short, fixed pressure hose onto pressure-resistant pipe.
• Make sure that persons or objects cannot be hit by condensate or escaping compressed air.
BEKOMAT® 14, 14CO, 14CO PN25, BEKO condensate drain
Net €734.00
€873.46*
BEKO condensate drain BEKOMAT® 14, 14CO, 14CO PN25
Cost-effective and reliable: BEKOMAT ® standard units
The BEKOMAT® range provides the 12, 13, 14 and BEKOMAT 16 standard units for virtually every application, which are not just the correct solution, rather more also the most suitable low-energy solution. The integrated capacitive sensor for volume-controlled condensate discharge helps save energy and enhances efficiency – which is what you would expect from BEKOMAT.
Unnecessary costs and damage in the compressed air generation can only be efficiently prevented with volume-controlled condensate discharge. For this reason, BEKOMAT condensate drain therefore functions with a capacitive sensor. The intelligent electronics prevent compressed air losses and minimise energy consumption. Due to this the electronically regulated condensate discharge, the drain often amortises itself within half a year compared to devices with time-controlled drain valves.
Proper use
• The BEKOMAT® is an electronically level-controlled condensate drain for compressed-air plants.
• It is employed within the permissible operating parameters (see "Technical data").
• The BEKOMAT® is able to drain condensate under operating pressure from the plant components virtually without compressed-air losses.
• For its function, the BEKOMAT® 14 requires an operating voltage and an operating pressure (see "Technical data").
• As far as the employment in plants with increased demands on the compressed-air quality is concerned (food industry, medical technology, laboratory equipment, special processes etc.), the operator must decide on measures for the monitoring of the compressed-air quality. These have an effect on the safety of the subsequent processes and may prevent damage to persons and plants.
• It is the task of the operator to ensure that the indicated conditions are met during the entire operating time.
• For the employment in CO2 plants, a BEKOMAT® with a CO specification (BEKOMAT® ... CO) must be used.
• The BEKOMAT® and the condensate supply line need to be protected against frost, as otherwise the function cannot be guaranteed. BEKO TECHNOLOGIES GMBH also offers suitable products for this purpose.
BEKOMAT® 16 CO, BEKO condensate drain
Net €1,627.00
€1,936.13*
Condensate drainage without loss of compressed air
If a float arrester leaks, high costs arise as a result of leaks. Time-controlled solenoid valves also cause compressed air losses. During the valve opening expensive compressed air escapes unused into the environment. In contrast, a condensate drain with electronic level control guarantees draining without compressed air, ie energy loss. This not only saves energy and costs, but also CO 2 emissions. This is a fantastic condensate drainage without loss of compressed air.
Further safety advice:
• For installation and operation, the national regulations and safety codes in force must also be adhered to.
• Do not use the BEKOMAT® 16 in hazardous areas.
• Regarding the inlet screw joints, excessive tightening forces must be avoided. This applies in particular to conical screw joints.
• The BEKOMAT® 16 will only function when voltage is applied.
• Do not use the test button for permanent drainage!
• Only use genuine spare parts! This is imperative to ensure perfect functioning.
Function Of BEKOMAT® 16 CO
The condensate flows through the feed line (1) into the BEKOMAT® unit and accumulates in the container (2). A capacitive sensor (3) continuously registers the liquid level and passes a signal to the electronic control as soon as the container is filled. The pilot valve (4) is then activated and the diaphragm (5) opens the outlet line (6) for discharging the condensate. When the BEKOMAT® unit has been emptied, the outlet line is closed again quickly and tightly without wasting compressed air.
1- Ready for operation
Voltage is being applied
2- Discharge procedure
Outlet line is open
3- Malfunction
Alarm mode is activated
4- Test
Manual drainage / alarm
When the microcontroller registers a malfunction, the device will automatically change to the alarm mode. The switching sequence of the valve (see illustration) continues until the fault is cleared (automatically or through maintenance). The red LED flashes as long as the device is in the alarm mode.
Malfunctioning could be caused by, e.g.:
• Mistakes during installation
• Dropping below the necessary minimum pressure
• Excessive condensate quantities (overloading)
• Blocked / shut off outlet line
• Extreme amount of dirt particles
• Frozen piping If the fault is not cleared within the first minute, a fault signal is triggered (see illustration) which can be picked off as a potential-free signal via the alarm relay.
BEKOMAT® 20 FM, BEKO condensate drain
Net €299.00
€355.81*
BEKO condensate drain BEKOMAT® 20 FMBEKOMAT® 20 | 20FM for Filters and water separators
The BEKOMAT® 20 FM with integrated filter management (filter status time display and filter status control) is a cost-effective monitoring solution for the connected filter element. It is designed as a robust condensate drain for water separators, filters or similar applications and can be used both in systems with oil-lubricated as well as with oil-free compressors. The plastic housing of the BEKOMAT 20 FM is equipped with an internal aluminum condensate container. The front panel is visible and can be operated from the top and the front.
There are difference between BEKOMAT 20 and BEKOMAT 20 FM.
The main difference between the two lies in their functionality. BEKOMAT 20 is a standard condensate drain unit that is designed to efficiently remove condensate from compressed air systems. It operates based on demand, activating only when condensate needs to be drained, thus helping to save energy and maintain system performance. On the other hand, BEKOMAT 20 FM is a more advanced version of the BEKOMAT 20 with additional features. The "FM" in BEKOMAT 20 FM stands for "Fully Modular," indicating that this model offers modular components that can be customized to suit specific requirements. This allows for greater flexibility in installation and operation, making it ideal for more complex or specialized applications. In summary, while both BEKOMAT 20 and BEKOMAT 20 FM serve the purpose of condensate drainage in compressed air systems, BEKOMAT 20 FM offers enhanced customization options and flexibility due to its fully modular design.
BEKOMAT® 20, BEKO condensate drain
Net €230.00
€273.70*
BEKO condensate drain BEKOMAT® 20BEKOMAT® 20 | 20FM for Filters and water separators
The BEKOMAT 20 is a strong condensate drain designed for use in water separators and air filters. It is suitable for oil-lubricated plants as well as oil-free compressors. The control panel is accessible from the top and the front. It has a plastic housing with integrated aluminum condensate container. The BEKOMAT 20 FM with integrated filter management is a cost effective monitoring solution for the service filters element.
Here are some advantages and uses of the BEKOMAT 20: Efficient condensate drainage: The BEKOMAT 20 is designed to effectively remove condensate from compressed air systems, ensuring optimal performance and preventing damage to downstream equipment. Energy-saving: The unit operates based on demand, meaning it only activates when condensate needs to be drained, helping to reduce energy consumption. Easy maintenance: The BEKOMAT 20 is designed for easy installation and maintenance, making it user-friendly for operators. Reliable operation: Beko Technologies is known for producing high-quality products, and the BEKOMAT 20 is no exception, offering reliable performance in industrial applications.
BEKOMAT 20 Applications:Industrial compressed air systems: The BEKOMAT 20 is commonly used in industrial settings where compressed air is a critical component of operations, such as manufacturing plants, automotive facilities, and food processing plants. Air compressors: The unit can be installed in conjunction with air compressors to ensure efficient condensate removal and protect the integrity of the compressed air system. Pneumatic tools and equipment: The BEKOMAT 20 can help maintain the performance and longevity of pneumatic tools and equipment by preventing moisture buildup in the air supply. Overall, the BEKOMAT 20 is a reliable and efficient condensate drain unit that offers several advantages in maintaining the performance of compressed air systems.
BEKOMAT® 3 CO EX BEKO condensate drain
Net €1,599.00
€1,902.81*
BEKO condensate drain BEKOMAT® 3 CO EX
Intrinsically safe
The BEKOMAT Ex fulfils the requirements of type of protection "intrinsically safe". This means that the energy created by its entire electronic system is at no time capable of igniting gases and vapours of explosion group II 2G EEx ib IIB T4. Under certain circumstances, however, explosive gases or vapours can escape from the BEKOMAT Ex via the condensate. The operator of a system in a hazardous area is to ensure that the system is installed in such a way that ignition of a potentially explosive atmosphere cannot occur.
The Special Solutions in overview:
BEKOMAT® 03 / 06 LA / LALP / LP: Condensate drain in CO or stainless steel with/without idle load valve especially for high-pressure, multi-stage and turbo compressors, also for low pressures.
BEKOMAT® 03 / 06, CO or Stainless steel- ATEX: Condensate drain also for explosive environments
BEKOMAT® 03 / 06 VACU: Condensate drain specialised for applications in vacuum systems
BEKOMAT® 31U, BEKO condensate drain
Net €198.00
€235.62*
BEKO condensate drain BEKOMAT® 31U BEKOMAT® with service concept – quick and economic
The innovative design of the BEKOMAT 31U, 32U, 33U and 33U CO series enables simplified handling as well as installation and maintenance with minimum time expenditure. The devices consist of no more than three units joined together with quick-release connectors. The control and sensor units are only installed once, only the service unit (including all wear and pressure parts) needs to be exchanged for maintenance purposes. This robust condensate drain is suitable for both oil-contaminated and oil-free, aggressive condensates.
The BEKOMAT 31U has a wide range of applications in various industries where compressed air systems are used. Some of the key applications include: Automotive Industry: In automotive manufacturing and repair facilities, the BEKOMAT 31U is used to remove condensate and oil from compressed air systems to ensure the quality of the air used in painting booths, pneumatic tools, and other critical applications. Food and Beverage Industry: The BEKOMAT 31U is essential in food and beverage processing plants to maintain clean and dry compressed air for packaging, bottling, and other production processes where air quality is crucial to prevent contamination. Pharmaceutical Industry: In pharmaceutical manufacturing facilities, the BEKOMAT 31U helps ensure that the compressed air used in production and packaging meets stringent quality standards to prevent any risk of contamination in sensitive pharmaceutical products. Manufacturing Industry: The BEKOMAT 31U is widely used in manufacturing plants for various applications such as operating pneumatic machinery, controlling production processes, and maintaining the quality of compressed air for equipment reliability and efficiency. Overall, the BEKOMAT 31U plays a critical role in maintaining the performance and longevity of compressed air systems across different industries by efficiently removing condensate and oil to prevent contamination and protect downstream components.
BEKOMAT® 32U, BEKO condensate drain
Net €245.00
€291.55*
BEKO condensate drain BEKOMAT® 32U Comfortable and simplified maintenance
A service indicator informs punctually about the upcoming maintenance and/or exchange for the service unit. All parts which are subject to wear or are pressurised can be reached with one manual movement. Neither electrical installations nor the installation of seals and individual parts are necessary. The installation concept is also particularly user-friendly and time-saving: The device only has to be connected once electrically. The robust housing is also waterproof according to IP67. BEKOMAT® 31U | 32U facilitates the connection to the compressed air system with an angle adaptor.
If the service unit of the BEKOMAT® 33U is disconnected from the power supply and condensate receiver tank, then the supply tank always remains connected to the compressed air system. This saves time and effort during maintenance.
Proper use of BEKOMAT® 32U
• The BEKOMAT® 32U is an electronically level-controlled condensate drain for compressed-air plants.
• The device is employed within the permissible performance parameters (see "Technical data").
• The BEKOMAT® 32U is able to drain condensate under operating pressure from the plant components virtually without compressed-air loss.
• For its function, the BEKOMAT® 32U requires a supply voltage and an operating pressure (see "Technical data").
• As far as the employment in plants with increased demands on compressed air is concerned (food industry, medical technology, laboratory equipment, special processes etc.), the operator must decide on measures for the monitoring of the compressed-air quality. These have an effect on the safety of the subsequent processes and may prevent damage to persons and plants.
• It is the task of the operator to ensure that the indicated conditions are met during the entire operating time.
Exclusion from the scope of application BEKOMAT® 32U
• The BEKOMAT® 32U as a condensate drain alone cannot guarantee a defined compressed-air quality, for this purpose, other additional technical devices are required.
• BEKOMAT® 32U is not suitable for use in plants carrying vacuum or atmospheric ambient pressure or in ex-areas.
• The BEKOMAT® 32U must not be exposed to permanent direct solar or thermal radiation.
• The BEKOMAT® 32U must not be installed and operated in areas with an aggressive atmosphere.
• The BEKOMAT® 32U is not heatable and, therefore, not suitable for the use in areas where frost is likely to occur.
• The BEKOMAT® 32U is not suitable for CO2 plants.
BEKOMAT® 33U, BEKO condensate drain
Net €423.00
€503.37*
BEKO condensate drain BEKOMAT® 33U Remove condensate from compressed air systems
The BEKOMAT 31U, BEKOMAT 32U, and BEKOMAT 33U are all condensate drain units designed to remove condensate from compressed air systems.
The main differences between BEKOMAT 31U, BEKOMAT 32U, and BEKOMAT 33U lie in their capacity, features, and functionality. BEKOMAT 31U: - The BEKOMAT 31U is a compact condensate drain unit suitable for smaller compressed air systems. - It has a lower condensate removal capacity compared to the BEKOMAT 32U and BEKOMAT 33U. - The BEKOMAT 31U is designed for applications where a lower condensate flow rate is expected. BEKOMAT 32U: - The BEKOMAT 32U is a mid-range condensate drain unit with a higher capacity than the BEKOMAT 31U. - It is suitable for medium-sized compressed air systems with moderate condensate generation. - The BEKOMAT 32U offers more advanced features compared to the BEKOMAT 31U, such as adjustable discharge intervals and drain times. BEKOMAT 33U: - The BEKOMAT 33U is a high-capacity condensate drain unit designed for larger compressed air systems with high condensate generation. - It has the highest condensate removal capacity among the three models. - The BEKOMAT 33U offers advanced features and customization options to meet the specific requirements of large-scale applications.
In summary, the BEKOMAT 31U, BEKOMAT 32U, and BEKOMAT 33U differ in terms of capacity, features, and suitability for different compressed air system sizes. Users can choose the model that best fits their system's requirements based on condensate generation, system size, and desired functionality.
Can we use BEKOMAT 33u instead of BEKOMAT 31u or BEKOMAT 32u in some cases, and vice versa?
Yes, in some cases, you can use BEKOMAT 33u instead of BEKOMAT 31u or BEKOMAT 32u and vice versa, but it should be noted that these substitutions may depend on the following factors: Drain capacity: BEKOMAT 33u has a higher drain capacity compared to BEKOMAT 31u and BEKOMAT 32u. Therefore, if your compressed air system produces a large volume of condensate, using BEKOMAT 33u may be more suitable. System size: Choosing the appropriate model should be based on the size of your compressed air system. If your system is small, BEKOMAT 31u may be sufficient. However, if the system is larger, BEKOMAT 33u could be the best option. Features and settings: BEKOMAT 31u, BEKOMAT 32u, and BEKOMAT 33u have different features and settings. Therefore, if you need specific features, make sure the chosen model provides these features. In general, you can use BEKOMAT 33u instead of BEKOMAT 31u or BEKOMAT 32u and vice versa if needed, but consider the mentioned factors to ensure proper compatibility and optimal performance.
BEKOMAT® 6 CO EX BEKO condensate drain
Net €2,105.00
€2,504.95*
BEKO condensate drain BEKOMAT® 6 CO EX
Condensate drainage without loss of compressed air
If a float arrester leaks, high costs arise as a result of leaks. Time-controlled solenoid valves also cause compressed air losses. During the valve opening expensive compressed air escapes unused into the environment. In contrast, a condensate drain with electronic level control guarantees draining without compressed air, ie energy loss. This not only saves energy and costs, but also CO 2 emissions.This is a fantastic condansate drainage without loss of compressed air.
Function Of BEKOMAT® 6 CO EX
Empty state:
Condensate drips through the inlet opening 1- and collects in the container 2- The diaphragm valve 5- is closed because the pressure equalization across the valve diaphragm via the pilot line 3- and the solenoid valve 4- 5- takes place. The larger area above the membrane causes a high closing force. The valve seat remains closed without leaks.
Filled state:
If the container 2- is filled with condensate so that the capacitive level sensor 6- reports a signal at the maximum point, the solenoid valve is switched and the area above the valve membrane is vented. The valve membrane lifts off the valve seat 7-, the overpressure in the housing pushes the condensate into the outlet line 8- The valve is closed leak-free before the compressed air escapes. If the condensate drain is disturbed (blocked drain line, defective membrane), the alarm mode is triggered after 60 seconds. The LED flashes, a fault message can be picked up as a potential-free signal via the alarm relay. With Ex devices this is possible via a built-in optocoupler and a switching amplifier. In this state, the solenoid valve is opened for 7.5 seconds every 4 minutes. A BEKOMAT® filled in a pressureless state is automatically alarm-free again under pressure. The drained condensate is now sent to the ÖWAMAT® oil-water separator for disperse condensate for treatment. In the case of stable emulsions, we recommend the BEKOSPLIT® splitting system for almost waste-free processing. Both systems offer legally compliant process technology for treating your compressed air condensate.
BEKOMAT® 8, BEKO condensate drain
Net €9,272.00
€11,033.68*
BEKO condensate drain BEKOMAT® 8
For applications in large compressors
The complete housing of this BEKOMAT® condensate drain is made of cast stainless steel and is therefore designed for use in aggressive atmospheres, as well as for the discharge of condensates from special gas compression. They are mainly utilised in petroleum plants and refineries, in the petrochemical industry and in crude or mineral oil plants. These are the largest electronically level-controlled condensate drain systems available on the market and have been specially designed and built for these requirements.
BEKOMAT® 08 / 09: Condensate drain for large compressors in particular in refineries, petrochemicals, chemical industry and petroleum plants.No loss of compressed air during drainingLow operating costs Outstanding reliability Durable and resistant to dirt Largevalve diameters prevent the formation of emulsions No delicate mechanical components Easy to install and virtuallyMaintenance-freeVersatile connection options Fully-automated operation and monitoring Connection to modern system monitoring Automatic start of self-cleaning process based on dirt formation
Service unit for BEKOMAT® 12, 12 CO, 12 CO PN 63, 12 CO NI, 12 KW
From
Net €26.00
€30.94*
Service unit BEKOMAT®
Details information
For BEKOMAT®
12
Preis (€)
12 CO
Preis (€)
12 CO PN 63
Preis (€)
12 CO NI
Preis (€)
12 KW
Preis (€)
Wearing part set
2000049
(XEKA12101)
82
2000049
(XEKA12101)
82
2000748
(XEKA12301)
93
-
-
-
-
Diaphragms 3 pcs
4003555
(XEKA00027)
(4045068)
109
4003555
(XEKA00027)
(4045068)
109
2000437
149
-
-
-
-
Diaphragm seat
2800829
(XEKA11011)
43
2800829
(XEKA11011)
43
-
-
-
-
-
-
Valve
4027846
103
4027847
121
4027848
482
-
-
-
-
Valve attachment components
2000052
(XEKA12102)
38
2000053
(XEKA12202)
41
2000054
(XEKA12302)
393
-
-
-
-
Sealing kit
2000058
(XEKA12104)
26
2000058
(XEKA12104)
26
2000749
(XEKA12304)
28
2000058 (XEKA12104)
26
2000058 (XEKA12104)
26
Housing
2000060
(XEKA12105)
83
2000061
(XEKA12205)
132
2000234
(XEKA12305)
134
-
-
2000192 (XEKA12106)
115
Top cover
2000066
(XEKA12005)
82
2000066
(XEKA12005)
82
2000066
(XEKA12005)
82
2000066 (XEKA12005)
82
2000194 (XEKA12007)
85
Sensor control board
2000062
(XEKA12001)
(4047971)
211
2000062
(XEKA12001)
(4047971)
211
2000062
(XEKA12001)
(4047971)
211
-
-
2000193 (XEKA12006)
211
Sensor PCB 230 VAC
2000063
(XEKA12002)
103
2000063
(XEKA12002)
103
2000063
(XEKA12002)
103
2000063 (XEKA12002)
103
2000063 (XEKA12002)
103
Sensor PCB 200 VAC
2000349
(XEKA12008)
103
2000349
(XEKA12008)
103
2000349
(XEKA12008)
103
2000349 (XEKA12008)
103
2000349 (XEKA12008)
103
Sensor PCB 115 VAC
2000064
(XEKA12003)
103
2000064
(XEKA12003)
103
2000064
(XEKA12003)
103
2000064 (XEKA12003)
103
2000064 (XEKA12003)
103
Sensor PCB 100 VAC
2000611
(XEKA12010)
103
2000611
(XEKA12010)
103
2000611
(XEKA12010)
103
2000611 (XEKA12010)
103
2000611 (XEKA12010)
103
Sensor PCB 24 VAC
2000065
(XEKA12004)
103
2000065
(XEKA12004)
103
2000065
(XEKA12004)
103
2000065 (XEKA12004)
103
2000065 (XEKA12004)
103
Sensor PCB 24 VDC
2000756
(XEKA12012)
103
2000756
(XEKA12012)
103
2000756
(XEKA12012)
103
2000756 (XEKA12012)
103
2000756 (XEKA12012)
103
Service unit for BEKOMAT® 13, 13 CO, 13 CO PN 25 | 40 | 50
From
Net €30.00
€35.70*
Service unit BEKOMAT®
Details information
For BEKOMAT®
13
Preis (€)
13 CO
Preis (€)
13 CO PN 25 | 40 | 50
Preis (€)
Wearing part set
2000067 (XEKA13101)
85
2000067 (XEKA13101)
85
2000366 (XEKA13301)
102
Diaphragms 3 pcs
4002451 (XEKA00020)
(4053197)
148
4002451 (XEKA00020)
(4053197)
148
2000439 (XEKA00019)
160
Diaphragm seat
2001118 (XEKA13109)
43
2001118 (XEKA13109)
43
2000351
151
Valve
4027849
131
4027850
149
4027851
547
Valve attachment components
2000071 (XEKA13102)
52
2000072 (XEKA13202)
55
2000371 (XEKA13302)
456
Sealing kit
2000073 (XEKA13104)
30
2000073 (XEKA13104)
30
2000367 (XEKA13304)
33
Housing
2000075 (XEKA13105)
196
2000076 (XEKA13205)
367
2000368 (XEKA13305)
491
Housing cover
2000077 (XEKA13106)
91
2000078 (XEKA13206)
296
2000369 (XEKA13306)
343
Top cover
2000066 (XEKA12005)
82
2000066 (XEKA12005)
82
2000066 (XEKA12005)
82
Sensor control board
2000079 (XEKA13001)
(4047967)
211
2000079 (XEKA13001)
(4047967)
211
2000079 (XEKA13001)
(4047967)
211
Sensor PCB 230 VAC
2000063 (XEKA12002)
103
2000063 (XEKA12002)
103
2000063 (XEKA12002)
103
Sensor PCB 200 VAC
2000349 (XEKA12008)
103
2000349 (XEKA12008)
103
2000349 (XEKA12008)
103
Sensor PCB 115 VAC
2000064 (XEKA12003)
103
2000064 (XEKA12003)
103
2000064 (XEKA12003)
103
Sensor PCB 100 VAC
2000611 (XEKA12010)
103
2000611 (XEKA12010)
103
2000611 (XEKA12010)
103
Sensor PCB 24 VAC
2000065 (XEKA12004)
103
2000065 (XEKA12004)
103
2000065 (XEKA12004)
103
Sensor PCB 24 VDC
2000756 (XEKA12012)
103
2000756 (XEKA12012)
103
2000756 (XEKA12012)
103
Service unit for BEKOMAT® 14, 14 CO, 14 CO PN 25
From
Net €30.00
€35.70*
Service unit BEKOMAT®
Details information
For BEKOMAT®
14
Preis (€)
14 CO
Preis (€)
14 CO PN 25
Preis (€)
Wearing part set
2000731 (XEKA14101)
85
2000731 (XEKA14101)
85
2002556 (XEKA14301)
106
Diaphragms 3 pcs
4002451 (XEKA00020)
148
4002451 (XEKA00020)
148
2000439 (XEKA00019)
160
Diaphragm seat
2001118 (XEKA13109)
43
2001118 (XEKA13109)
43
2000351
151
Valve
4027849
131
4027850
149
4027851
547
Valve attachment components
2000071 (XEKA13102)
52
2000072 (XEKA13202)
55
2000371 (XEKA13302)
456
Sealing kit
2000080 (XEKA14104)
30
2000080 (XEKA14104)
30
4000923
33
Housing
2000082 (XEKA14105)
240
2000083 (XEKA14205)
446
2000083 (XEKA14205)
446
Housing cover
2000084 (XEKA14106)
146
2000085 (XEKA14206)
319
2000085 (XEKA14206)
319
Top cover
2000066 (XEKA12005)
82
2000066 (XEKA12005)
82
2000066 (XEKA12005)
82
Sensor control board
2000086 (XEKA14001)
(4047968)
217
2000086 (XEKA14001)
(4047968)
217
2000086 (XEKA14001)
(4047968)
217
Sensor PCB 230 VAC
2000063 (XEKA12002)
103
2000063 (XEKA12002)
103
2000063 (XEKA12002)
103
Sensor PCB 200 VAC
2000349 (XEKA12008)
103
2000349 (XEKA12008)
103
2000349 (XEKA12008)
103
Sensor PCB 115 VAC
2000064 (XEKA12003)
103
2000064 (XEKA12003)
103
2000064 (XEKA12003)
103
Sensor PCB 100 VAC
2000611 (XEKA12010)
103
2000611 (XEKA12010)
103
2000611 (XEKA12010)
103
Sensor PCB 24 VAC
2000065 (XEKA12004)
103
2000065 (XEKA12004)
103
2000065 (XEKA12004)
103
Sensor PCB 24 VDC
2000756 (XEKA12012)
103
2000756 (XEKA12012)
103
2000756 (XEKA12012)
103
Service unit for BEKOMAT® 16 CO
From
Net €33.00
€39.27*
Service unit BEKOMAT®
Details information
For BEKOMAT®
16 CO
Preis (€)
Wearing part set
2000087 (XEKA16201)
106
Diaphragms 3 pcs
4002451 (XEKA00020)
(4053197)
148
Diaphragm seat
-
-
Valve
2000089 (XEKA16203)
175
Valve attachment components
2000088 (XEKA16202)
43
Sealing kit
2000090 (XEKA16204)
33
Housing
2000092 (XEKA16206)
961
Housing cover
2000091 (XEKA16205)
394
Top cover
2000066 (XEKA12005)
82
Sensor control board
2000093 (XEKA16001)
(4047969)
217
Sensor PCB 230 VAC
2000063 (XEKA12002)
103
Sensor PCB 200 VAC
2000349 (XEKA12008)
103
Sensor PCB 115 VAC
2000064 (XEKA12003)
103
Sensor PCB 100 VAC
2000611 (XEKA12010)
103
Sensor PCB 24 VAC
2000065 (XEKA12004)
103
Sensor PCB 24 VDC
2000756 (XEKA12012)
103
Service unit for BEKOMAT® 20 and BEKOMAT® 20FM
From
Net €43.00
€51.17*
Service unit for BEKOMAT® 20 and BEKOMAT® 20FM
Service unit BEKOMAT®
Details information
For BEKOMAT®
20
Price (€)
20 FM
Price (€)
Wearing part set
4003701 (XEKA20101)
59
4003701 (XEKA20101)
59
Diaphragms 3 pcs
2000496 (XEKA10106)
75
2000496 (XEKA10106)
75
Diaphragms 3 pcs
4003700 (XEKA20103)
43
4003700 (XEKA20103)
43
Top cover
4003703 (XEKA20010)
64
4003704 (XEKA20012)
66
Sensor control board
-
-
4003705 (XEKA20201)
204
Sensor PCB 230 VAC
4003706 (XEKA20114)
129
2001501 (XEKA21214)
80
Sensor PCB 200 VAC
4004089 (XEKA20119)
129
4001278 (XEKA21219)
80
Sensor PCB 115 VAC
4003707 (XEKA20115)
129
2001502
80
Sensor PCB 100 VAC
4003708
130
4001276 (XEKA21218)
80
Sensor PCB 24 VAC
4003709
129
2001504 (XEKA21216)
80
Sensor PCB 24 VDC
-
-
2001915 (XEKA21217)
80
Service unit for BEKOMAT® 21 and BEKOMAT® 21 PRO
From
Net €30.00
€35.70*
Service unit BEKOMAT®
Details information
For BEKOMAT®
21
Preis (€)
21 PRO
Preis (€)
Wearing part set
2001365 (XEKA21101)
59
2001365 (XEKA21101)
59
Diaphragms 3 pcs
2000496 (XEKA10106)
75
2000496 (XEKA10106)
75
Diaphragm seat
2001367 (XEKA21103)
43
2001367 (XEKA21103)
43
Sealing kit
2001366 (XEKA21102)
30
2001366 (XEKA21102)
30
Top cover
2001913 (XEKA21010)
66
2001914 (XEKA21011)
66
Sensor control board
-
-
2001494 (XEKA21203) (4047963)
137
Sensor PCB 230 VAC
2001488 (XEKA21114)
130
2001495 (XEKA21204)
80
Sensor PCB 200 VAC
4004090
130
4001277 (XEKA21209)
80
Sensor PCB 115 VAC
2001489
130
2001496
80
Sensor PCB 100 VAC
4001273 (XEKA21116)
130
4001275 (XEKA21208)
80
Sensor PCB 24 VAC
2001490 (XEKA21117)
129
2001497 (XEKA21206)
80
Sensor PCB 24 VDC
-
-
2001498 (XEKA21207)
80
Service unit for BEKOMAT® 3, 3 CO, 3 E, 3 E 25, 3 E 63
From
Net €26.00
€30.94*
Service unit BEKOMAT®
Details information
For BEKOMAT®
3
Preis (€)
3 CO
Preis (€)
3 E
Preis (€)
3 E 25
Preis (€)
3 E 63
Preis (€)
Wearing part set
2800656 (XEKA03001)
88
2800670 (XEKA03015)
88
2800702 (XEKA03047)
125
2800702 (XEKA03047)
125
2800702 (XEKA03047)
125
Diaphragms 3 pcs
4002451 (XEKA00020)(4053197)148
4002451 (XEKA00020)
(4053197)
148
4002451 (XEKA00020)
(4053197)
148
2000439
160
2000439
160
Sealing kit
2800658 (XEKA03003)
26
2800671 (XEKA03016)
26
2800689 (XEKA03034)
50
2800703 (XEKA03048)
50
2800703 (XEKA03048)
50
Top cover
2800661 (XEKA03006)
90
2800661 (XEKA03006)
90
2800690 (XEKA03035)
90
2800690 (XEKA03035)
90
2800690 (XEKA03035)
90
Service air valve
2800663 (XEKA03008)
91
2800717 (XEKA03062)
110
2800663
91
2800717 (XEKA03062)
110
2800717 (XEKA03062)
110
Control air cap
2800665 (XEKA03010)
34
-
-
-
-
-
-
-
-
Valve
2800664 (XEKA03009)
214
2800673 (XEKA03018)
335
2800693 (XEKA03038)
429
2800705 (XEKA03050)
446
2800718 (XEKA03063)
355
Upper housing
2800667 (XEKA03012)
321
2800674 (XEKA03019)
423
2800696 (XEKA03041)
2452
2800696 (XEKA03041)
2452
2800719 (XEKA03064)
2469
Bottom housing
2800668 (XEKA03013)
139
2800675 (XEKA03020)
234
2800720 (XEKA03065)
1578
2800720 (XEKA03065)
1578
2800720 (XEKA03065)
1578
Sensor board 230 VAC
2800659 (XEKA03004)
341
2800659 (XEKA03004)
341
2800659 (XEKA03004)
341
2800659 (XEKA03004)
341
2800659 (XEKA03004)
341
Sensor board 100 VAC
2002200 (XEKA03190)
341
2002200 (XEKA03190)
341
2002200 (XEKA03190)
341
2002200 (XEKA03190)
341
2002200 (XEKA03190)
341
Sensor board 110 VAC
2800698 (XEKA03043)
341
2800698 (XEKA03043)
341
2800698 (XEKA03043)
341
2800698 (XEKA03043)
341
2800698 (XEKA03043)
341
Sensor board 24 VAC
2800699 (XEKA03044)
341
2800699 (XEKA03044)
341
2800699 (XEKA03044)
341
2800699 (XEKA03044)
341
2800699 (XEKA03044)
341
Sensor board 24 VDC
-
-
-
-
-
-
-
-
-
-
Service unit for BEKOMAT® 31U , 32U , 33U , 33U CO
From
Net €18.00
€21.42*
Service unit BEKOMAT®
Details information
For BEKOMAT®
31U
Preis (€)
32U
Preis (€)
33U
Preis (€)
33U CO
Preis (€)
Connection adapter
4010155 (XEKA31001)
44
4010155 (XEKA31001)
44
-
-
-
-
Sealing kit
4024386
18
4024392
18
4024397
18
4024397
18
Designshell
4010164 (XEKA31011)
20
4010167 (XEKA32011)
26
4010167 (XEKA32011)
26
4010167 (XEKA32011)
26
Service Unit
4023607 (XEKA31101)
129
4023571
139
4023633 (XEKA33101)
180
4023635 (XEKA33103)
212
Service unit for BEKOMAT® 6 CO, 6 E 25
From
Net €26.00
€30.94*
Service unit BEKOMAT®
Details information
For BEKOMAT®
6 CO
Preis (€)
6 E 25
Preis (€)
Wearing part set
2800670 (XEKA03015)
88
2800702 (XEKA03047)
125
Diaphragms 3 pcs
4002451 (XEKA00020) (4053197)
148
2000439
160
Sealing kit
2800658 (XEKA03003)
26
2800703 (XEKA03048)
50
Top cover
2800661 (XEKA03006)
90
2800690 (XEKA03035)
90
Service air valve
2800663 (XEKA03008)
91
2800717 (XEKA03062)
110
Control air cap
2800665 (XEKA03010)
34
-
-
Valve
2800664 (XEKA03009)
214
2800705 (XEKA03050)
446
Upper housing
2800789 (XEKA06001)
423
-
-
Bottom housing
2800790 (XEKA06002)
975
-
-
Sensor board 230 VAC
2800796 (XEKA06008)
341
2800796 (XEKA06008)
341
Sensor board 100 VAC
-
-
-
-
Sensor board 110 VAC
2800804 (XEKA06016)
341
2800804 (XEKA06016)
341
Sensor board 24 VAC
4010781 (XEKA06017)
342
4010781 (XEKA06017)
342
Sensor board 24 VDC
2800806 (XEKA06018)
341
2800806 (XEKA06018)
341