KOMPBERG® ZXF75 Oil free Screw Compressor

Increase efficiency with PUREBERG F15WW Water Separator for Compressed Air Systems A water separator, also called a condensate separator, is a device that removes moisture and water from an air flow. In the area of air compressors and compressed air systems, the water separator is important to ensure that the air remains dry. Moisture in the compressed air can otherwise lead to problems such as rust, blocked lines and damage to machines. The water separator PUREBERG® F15WW, (888 m3/h at 7 bar) is a widely used example in the industry. The water separator works through various mechanisms to separate the condensate from the air. In most cases it uses centrifugal force or gravity to remove the water from the airflow. As the moist air flows through the separator, the water droplets are pulled out of the air by these forces and collect at the bottom of the separator. From there, the accumulated water can be removed from the system either manually or automatically. There are different types of water separators, including condensate separators for air compressors, compressed air lines or industrial applications. Choosing the right water separator for the device depends on various factors. This includes the flow rate, pressure, ambient temperature and the specific requirements of the program. In summary, the water separator is very important in compressed air systems. It helps to improve air quality, optimize operations and extend the life of machines. What happens if our compressed air systems do not have a proper water separator with condensate drainage, such as: B. BEKOMAT 20? A compressed air water separator without a suitable condensate drain like the BEKOMAT 20 causes several problems in your compressed air system: Contamination: Water and oil condensate can accumulate in the air system, leading to contamination of the compressed air. This can affect the quality of the compressed air and potentially damage downstream equipment and processes. Corrosion: Water in compressed air can corrode system components, resulting in shortened service life and failure. Reduced efficiency: Water in compressed air can reduce system performance and efficiency, resulting in increased energy consumption and higher operating costs. Maintenance issues: Without a proper water separator and condensate drain, you may need to manually drain condensate from the system, which can be time-consuming and may not be as effective as an automated system like the BEKOMAT 20. Overall, having a suitable water separator with a condensate drain is essential for maintaining the performance, efficiency, and reliability of your compressed air system. Technical data of water separator Water separator PUREBERG® F15WW Operating pressure [bar] 0 - 20 Pipe Size [inch] 2 Flow Capacity [m3/h] 888 Flow Capacity [Scfm] 522 Dimensions (AxBxCxD) [mm] 605 x 160 x 43 x 180 Volume [l] 6,0 Weight [kg] 5,1 Operating temperature [°C] 1,5 - 65 Housing material Aluminum Cover ABS Sealing NBR Corrosion protection Stainless Steel 1.4301 Outside protection Anodized (optional) Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Water separator Installation And Operating Manual , PDF ( Size: 490 KB )

Refrigeration dryer DRYBERG®️ RF13/AC equals to DRYPOINT®️ RA750/AC Minimum installation requirements: • Choose an area which is clean and dry, free from dust and protected against atmospheric disturbances. • The load-bearing zone must be even, horizontal and able to bear the weight of the dryer. • Minimum ambient temperature +1°C. • Maximum ambient temperature +50°C. • Ensure a proper cooling air replacement. • Allow a sufficient clearance on each side of the dryer for proper ventilation and to facilitate maintenance operations. The dryer does not require attachment to the floor surface. Technical Data of Refrigeration dryer DRYBERG® RF13/AC Refrigeration dryer DRYBERG®️ RF13/AC Volume flow (m3/h) at +3 °C 780 Power consumption (kW) 1,40 Pressure loss (Δp bar [g]) 0,20 Air connection (ø) G 2" BSP-F Dimensions AxBxC (mm) 975x555x625 Weight (kg) 94 Operating pressures multiply air flow with correction factor f1 bar (g) 4 5 6 7 8 10 12 14 f1 0.77 0.86 0.93 1.00 1.05 1.14 1.21 1.27 Ambient air temperatures multiply air flow with correction factor f2 °C 25 30 35 40 45 f2 1.00 0.95 0.88 0.79 0.68 Compressed air inlet temperatures multiply air flow with correction factor f3 °C 25 30 35 40 45 50 55 f3 1.20 1.11 1.00 0.81 0.67 0.55 0.45 Downloads Technical Data DRYBERG®️ RF13/AC Refrigeration dryer, PDF( Size: 450 KB ) Manual DRYBERG®️ RF/AC, PDF( Size: 5 MB )  

Compressed air filter PUREBERG® F15(Type)W ,888 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter Innovative features mean outstanding performance without compromise  Compressed air filter PURBERG® housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons, odour vapours from com­pressed air systems. To meet the required com­pressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Housing prevents condensate from being picked up and "car­ried over" into the airstream. The BERG compressed air filter technolo­gy guarantees low operating costs, long service life, outstanding process reliability, and safe filtration.    Technical Data of Compressed air filter  Compressed air filter PUREBERG® F15(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 2 Flow Capacity [m3/h] 888 Flow Capacity [Scfm] 522 Dimensions (AxBxCxD) [mm] 605 x 160 x 43 x 180 Volume [l] 6,0 Weight [kg] 5,1 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)       G General Filter F Fine Filter S Superfine Filter A Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

BEKO condensate drain BEKOMAT® 20BEKOMAT® 20 | 20FM for Filters and water separators The BEKOMAT 20 is a strong condensate drain designed for use in water separators and air filters. It is suitable for oil-lubricated plants as well as oil-free compressors. The control panel is accessible from the top and the front. It has a plastic housing with integrated aluminum condensate container. The BEKOMAT 20 FM with integrated filter management is a cost effective monitoring solution for the service filters element. Technical data of BEKOMAT® 20 BEKOMAT® BEKOMAT® 20 Max. compressor performance [m³/min] 4 Max. dryer performance [m³/min] 8 Max. filter performance [m3/min] 40 Voltage 230VAC / 50-60Hz Operating pressure [bar] 0,8 - 16 Temperature [°C] +1 to + 60 Condensate feed 1 x G 1/2 , 1 x G 3/4 Condensate drain DN 8-10 bzw. G 1/4i Dimensions B x T x H [mm] 140 x 72 x 140 Weight [kg] ca. 0,7 Here are some advantages and uses of the BEKOMAT 20: Efficient condensate drainage: The BEKOMAT 20 is designed to effectively remove condensate from compressed air systems, ensuring optimal performance and preventing damage to downstream equipment. Energy-saving: The unit operates based on demand, meaning it only activates when condensate needs to be drained, helping to reduce energy consumption. Easy maintenance: The BEKOMAT 20 is designed for easy installation and maintenance, making it user-friendly for operators. Reliable operation: Beko Technologies is known for producing high-quality products, and the BEKOMAT 20 is no exception, offering reliable performance in industrial applications.  BEKOMAT 20 Applications:Industrial compressed air systems: The BEKOMAT 20 is commonly used in industrial settings where compressed air is a critical component of operations, such as manufacturing plants, automotive facilities, and food processing plants. Air compressors: The unit can be installed in conjunction with air compressors to ensure efficient condensate removal and protect the integrity of the compressed air system. Pneumatic tools and equipment: The BEKOMAT 20 can help maintain the performance and longevity of pneumatic tools and equipment by preventing moisture buildup in the air supply. Overall, the BEKOMAT 20 is a reliable and efficient condensate drain unit that offers several advantages in maintaining the performance of compressed air systems.  Downloads Technical Data BEKOMAT® 20, PDF (Size: 2.5 MB) BEKOMAT® 20 datasheets, PDF ( Size: 330 KB )