Oil water separator OWAMAT 14 , 14.6m3/min
-10%
Oil water separator OWAMAT 14 , 14.6m3/min
| German type approval
As the Oil water separator OWAMAT ® meets all relevant German statutory requirements, its discharge can be disposed of directly through the foul drain.
That is why the Deutsches Institut für Bautechnik (DIBt) has issued a type approval for all models with or without free oil separation used for the removal of synthetic or mineral oils, or for the processing of condensate produced in screw or piston compressors. |
 |
Oil-water separation made easy with the OWAMAT ® The OWAMAT ® separates oil from water – efficiently and with minimum maintenance. The Oil water separator OWAMAT ® filters have a much longer service life than conventional activated carbon filters. They can be changed quickly and the cartridge can be disposed of safely. |
|
| OEKOSORB ® cartridge for quick and clean replacement |  |
||
| Prefilter with increased capacity thanks to optimised filter material |  |
||
| Adjustable connection (3 directions) |
 |
||
Technical Data of Oil water separator OWAMAT® 14
| Oil water separator OWAMAT® | OWAMAT® 14 |
| Min./max. compressor performance: | 8.4 … 14.6 M3/MIN |
| Container volume: | 61.3 l |
| Capacity with preseparator: | 46.3 l |
| Capacity without preseparator: | 41.5 l |
| Pre lter: | 6.7 l |
| Main lter / cartridge capacity: | 11.0 l |
| Approx. main lter / cartridge weight (wet) | 8.0 kg |
| Condensate inlet (hose size): | 3 x G1⁄2 inside (Ø inside = 10 mm), 1 x G1 inside (Ø inside = 25 mm) |
| Water outlet (hose size): | 1x G1 inside (Ø inside = 25 mm) |
| Service valve (hose size): | 1x G1⁄4 inside (Ø-inside = 13 mm) |
| Oil discharge: | DN 25 |
| Oil receiver: | 2 x 5 l |
| Empty weight with preseparator: | 18.5 kg |
| Empty weight without preseparator: | 16 kg |
| Min./max. temperature | +5 ... +60 °C |
| Max. operating pressure at inlet | 16 bar |