KOMPBERG®️ BKB 40 - 600 TWIN Booster Compressor

Booster Compressor KOMPBERG®️ BKB 40 - 300Booster Compressor KOMPBERG®️ BKB Description The compressor is intended for compressing air only. Its use to compress other gases requires prior agreement with machine manufacturer or vendor. Such agreement must be made in writing. The compressor may not be used for any purpose other than specified. Booster Compressor KOMPBERG® BKB Technical Description Applications The KOMPBERG®️ series booster compressors are intended for boosting air pressure from 1-1.3 MPa (KOMPBERG®️ BKB 40 -300) on the suction side, to 2.5-4.0 MPa on the pressure side. The booster is provided with an oil filter and end cooler.   Main components The booster compressor comprises an oil piston compressor with “V” cylinder arrangement at 90° angle. The compressor is driven by an electric motor with a belt transmission. A common frame supports the compressor, motor and air end cooler with fans and filters.   The compressor  It is a one-stage, two-cylinder, one-sided compressor, with a "V" cylinder configuration and a 90 bifurcation angle. A compressor carter with a tunnel structure is made as a cast iron cast. The lower part of the crankcase is at the same time an oil sump in which the oil suction filter is mounted. The oil filter is mounted on the oil pump. Two cylinders with working valves are attached to the compressor's crankcase. The working valves are pressed against the heads of the head with adjustment screws through special pressure sleeves. In order to ensure more efficient heat dissipation, the cylinders and heads are suitably ribbed. Crankshaft, cast of nodular cast iron with increased impact strength, is supported by two rolling bearings. On the one hand, the crankshaft has a conical tip for seating the pulley, while a gear-driven oil pump is driven from the other end of the shaft. Two connecting rods with two-part thin-walled bushes are mounted on the surface hardened crank shaft. Both cylinders on the intake are connected by a common intake manifold, and on the discharge by an air cooler.    Electric motor  The booster compressor is driven by a squirrel-cage, AC electric motor. The motor is designed for an intermittent run, for maximum 20 starts per hour. The compressor is driven by the motor via a belt transmission.   End cooler  The cooler in the KOMPBERG®️ boosters is made of vertical ribbed steel tubes connected with horizontal collectors at the ends. The cooler has welded construction. In the upper cooler collectors, valves for draining condensate and a relief solenoid valve are provided. Air circulation in both solutions is forced by a fan driven by an electric motor.   Booster compressor frame  The KOMPBERG®️ BKB 40 - 300 booster frame, on which the motor and compressor are  supported, is made of plate and seated on four shock absorbers.

KOMPBERG®️ BKB 300 - 19 Booster Compressor Heavy-Duty Booster for High-Pressure Air and Nitrogen Gas Applications: The BKB 300 Compressor The BKB 300 Booster Compressor stands out as a robust solution for high-pressure air and nitrogen gas applications, offering numerous advantages that enhance both performance and user experience. One of its key features is its low noise operation, achieved through innovative design elements such as isolating the compression block from the motor and incorporating enhanced soundproofing materials. This results in significantly reduced vibration and noise levels, creating a more comfortable working environment. In terms of cost-effectiveness, the BKB 300 is equipped with an IE3 motor and a self-tensioning V-belt, which provide exceptional energy efficiency and lower operational costs. Additionally, durable piston rings and corrosion-resistant cooler pipes contribute to extended service intervals, further minimizing maintenance expenses. Dependability is another hallmark of this compressor; it is engineered for continuous operation, ensuring consistent performance under demanding conditions. The integrated oil-water separators guarantee high-quality air and nitrogen output, while the automatic condensate drain system helps to reduce pressure losses and noise levels, ultimately enhancing overall efficiency and reliability. With its combination of low noise, cost-effective ownership, and dependable performance, the BKB 300 is an ideal choice for industries requiring high-pressure gas solutions.

KOMPBERG®️ BKB 300 - 11 Booster nitrogen Compressor High-Performance and High-Pressure Nitrogen Boosters For demanding high-pressure air and nitrogen applications, the nitrogen booster compressor BKB 300 delivers exceptional compression efficiency and durability. Engineered to German quality standards, this heavy-duty booster is designed for industrial-grade reliability and performance. With capacities ranging from 180 to 320 L/min and pressure ratings up to 350 bar, the BKB 300 series offers a versatile solution for high-pressure gas applications. Available in multiple power configurations, it accommodates diverse operational needs, including booster variants for enhanced performance. At the heart of the system lies BERG’s high-pressure compression technology, built for superior durability and operational longevity. The BKB 300 seamlessly integrates with a wide range of customizable options and accessories, allowing tailored configurations to meet specific nitrogen system requirements. Whether used as a standalone unit or part of a comprehensive Nitrogen Plant system, the KOMPBERG BKB 300 exemplifies BERG’s commitment to innovation, efficiency, and long-term reliability in industrial high-pressure solutions.

KOMPBERG®️ BKB 300 - 15 Booster Compressor A heavy-Duty Booster for High-pressure Air and Nitrogen Gas Applications ADVANTAGES of BKB 300 Booster Compressor Low Noise:Reduced vibration achieved by isolating the compression block from the motor. Enhanced soundproofing for noise reduction. Cost-Effective Ownership:IE3 motor and self-tensioning V-belt offer superior energy efficiency. Durable piston rings and corrosion-resistant cooler pipes extend service intervals, minimizing maintenance costs. Dependable Performance:Designed for continuous operation, ensuring reliability. Integrated oil-water separators maintain high air and nitrogen quality. Automatic condensate drain reduces pressure losses and noise levels, enhancing efficiency and reliability.