Screw compressors, KOMPBERG® BSDF

Rotary Screw Compressor 22 - 250 kW, (KOMPBERG® BSDF)

BERG compressors of the BSDF series from 22 to 250 kW are based on the BERG standard BSD series. The BERG Frequency Control compressors are exceptionally efficient variable speed screw compressors. The large, slow-running Air-end with energy-saving CMC controller and German branded inverters offer outstanding performance over the entire control range.
All models of BSDF Compressors can be maintained 100% without additional maintenance.
Ultimate Efficiency with our BSDF significantly increases reliability and durability, direct drive reduces the number of components required compared to the gearbox and eliminates the associated transmission losses. Sound levels are also significantly lower. 
KOMPBERG® BSDF22 Screw Compressor
BERG MASTER CONTROLLER FOR GROUP OF SCREW COMPRESSORS BERG MASTER CONTROLLER Additional feature of the RC-S series master controllers that provides to duplicate the operator panel onto a PC or mobile devices. this feature can be implemented in both new controllers and the controllers that are already used to control a specific group of compressors. Master control unit RC is responsible for : Control of the start and stop system of the compressors installed in one compressed air network, Monitoring and ensuring correct pressure in the system, Optimum load distribution between individual compressors, Possibility of selecting the leading compressor, Setting pressure start and stop thresholds, Entering the parameters of the system regulation, Collection of information from the supervised system and its processing, and all signalling (in RC-S) Remote monitoring of the supervised system status by means of the installed interface operated in the web browser or/and by means of the Modbus TCP communication protocol (in Modbus RTU option via RS485),(in RC-S). The use of the RC- control unit of the compressor group eliminates the necessity of the machine operator intervention into settings and enables equal load distribution between compressors. Control of the screw compressor group is possible in the Sequence or cascade mode. √ The sequence control is recommended for the compressors of comparable size. Their operation time is usually equalized. √ The cascade control is dedicated to the machines of different sizes, where the one operates in a continuous way and the others operate only during peak demands for compressed air. 

Net €19,900.00 €23,681.00*
KOMPBERG® BSDF30 Screw Compressor
Why frequency control? Energy savings almost up to 35% Low fatigue and low depreciation Print optimization Reduction of discharge losses Lower power consumption leads to reduced CO2

Net €23,700.00 €28,203.00*
KOMPBERG® BSDF37 Screw Compressor
KOMPBERG®️ made from different effective parts> Large convenient and removable doors are fitted as standard on BERG Screw compressors and the housing provides adequate space for the convenient layout of the components. Reliable Direct drive, heavy-duty and consistently efficient. BERG design principles prevent reduced output and premature wear in this essential drive component. using the famous German components as well as high quality German filters, Siemens electromotor and controller.

Net €24,500.00 €29,155.00*
KOMPBERG® BSDF45 Screw Compressor
All Our Compressors are equiped as Direct Drive Drive 1:1 means that the Airend and motor are directly connected. This means that there are no transmission losses. BERG’s direct drive screw compressors deliver outstanding performance and make possible great savings in energy. The drive motor and the air end in one-to-one drive series compressors are designed to operate at the same low speed. This enables the drive and compression units to be linked via a maintenance-free coupling which avoids the transmission losses with gear-driven units. our direct drive compressor reduces the number of components needed in comparison with gear drive, significantly increasing reliability and service life. Sound levels are also considerably lower. The airend in each KOMPBERG®️ BSD model is designed to specifically match air demand and ensures outstanding efficiency through the low-speed operation.

Net €28,900.00 €34,391.00*
KOMPBERG® BSDF55 Screw Compressor
All Our Compressors are equiped as Direct Drive BERG has 1:1 direct drive screw compressors that named KOMPBERG®️ BSD series. An innovative, user-friendly concept totally geared to performance and economy.

Net €29,800.00 €35,462.00*
KOMPBERG®️ BSDF75 Screw Compressor
Screw Compressor KOMPBERG® BSDF75 Oil-injected screw compressors incorporate oil for lubrication and sealing purposes, ensuring smooth operation and prolonging equipment lifespan. Integrated refrigeration dryers are often included in screw compressor systems to eliminate moisture from compressed air, safeguarding against corrosion and maintaining air quality. Screw compressors are widely recognized for their exceptional efficiency, offering high compression ratios and minimal energy wastage. They typically operate within a pressure range of 7 to 13 bar, suitable for diverse industrial applications.These compressors are eligible for subsidies or incentives through programs like BAFA, which promotes energy efficiency and environmental protection. With features such as low operating costs, easy handling, and minimal energy consumption, screw compressors are favored in various industries for their reliability and cost-effectiveness. screw compressor KOMPBERG Centrifugal fan The high-efficiency fan with a higher compression ratio ensures effective cooling throughout the entire compressor operation time. High compression ratio ensures an appropriate, even flow of sucked ambient air, through the cooler, also in the case of cooler fouling. Centrifugal fan is driven by low-speed electrical motor, which considerably influences the compressor noise level.

Net €39,900.00 €47,481.00*
KOMPBERG®️ BSDF90 Screw Compressor
Monitoring and supervising of individual compressor MS Connect provides the remote work monitoring, supervision and changing of the basic operating parameters of the screw compressor equipped with the Siemens controller. Software is designed for installation on PCs of people responsible for maintaining work continuity and managing the operation of compressors.

Net €50,700.00 €60,333.00*
KOMPBERG®️ BSDF110 Screw Compressor
KOMPBERG®️ BSDF Description Frequency Control series compressors from BERG are exceptionally efficient variable speed screw compressors with Siemens inverter as well as energy-saving Siemens Controller provide outstanding performance throughout the entire control range.All BSDF Compressors model is capable of 100 % duty cycles without any additional maintenance required.These screw-type compressors have High economic efficiency, long service life, simple and cost-effective maintenance.

Net €59,800.00 €71,162.00*
KOMPBERG®️ BSDF132 Screw Compressor
Ultimate Efficiency with Our BSDF Ultimate Efficiency with our BSDF significantly increases reliability and service life, Direct drive reduces the number of components needed and eliminates the associated transmission losses. Sound levels are also considerably lower. Operation safety The frequency inverter is located in the separate and effectively cooled switchgear, which ensures good ventilation and protection against an influence of heat emitted by the compression module operation.

Net €67,900.00 €80,801.00*
KOMPBERG®️ BSDF160 Screw Compressor
KOMPBERG®️ BSDF Advantages - Compact Airends eliminating pipework and links with known sources of problems. - Efficient noise-insulated canopy and multiple anti-vibration mountings for minimization of noise and vibration levels. - Door panels are easily removed allowing ease of access to the individual components for servicing. - Use of standard components and maintaining high-quality standards and offering flexibility in the event of faults.

Net €87,600.00 €104,244.00*
KOMPBERG®️ BSDF200 Screw Compressor
We use the reliable supplier for inverters: SIEMENS Inverters have been amazingly reliable workhorses for over 25 years and no competitor drive boast a track record like that. The siemens inverters are microprocessor-controlled and use state-of-the-art Insulated Gate Bipolar transistor (IGBT) technology. This makes them reliable and versatile.   Even higher saving faster return on investment Higher motor efficiency up to 70%, further reduce the peripheral equipment losses connected with compressed air production Depreciation even in 4 months(in continuous running), and on average within 9 months from purchase A 1000 series inverter Asynchronous motor with the highest efficiency IE4 class Even higher environmental protection

Net €113,400.00 €134,946.00*
KOMPBERG®️ BSDF250 Screw Compressor
BERG CONTROLLER BERG CONTROLLER (SIEMENS controllers) is mostly supplying for BERG based on the modern technologies (microprocessor with the Cortex core), meet the recent industrial requirements with simultaneous minimum power consumption and correct, failure-free compressor operation. Easy to read display, information diodes and clear keyboard provide easy and fast configuration of operating parameters, diagnosis of the compressor operation state, as well as an operation mode selection. THE LEDS ON THE CONTROLLER INFORM THE OPERATING PERSONNEL ABOUT: Compressor operation mode, Motor operation status, Occurrence of any events User friendly world wide

Net €123,600.00 €147,084.00*

What are Screw Compressors?

Screw compressors are a type of compressed air compressor that generates compressed air through the rotation of two rotary screws. These screws, also known as rotors, move in opposite directions and compress the air in the interspace. The result is a constant and efficient supply of compressed air, which is essential in many industrial applications.

How do Rotary Screw Compressors Work?

The operating principle of screw compressors is based on the interaction of the two rotors. These are housed in a casing that serves as the compression chamber. As the rotors turn, air is drawn into the chamber and compressed by the rotation of the screws. The compression process is continuous, leading to a consistent and reliable supply of compressed air.

A particular advantage of screw compressors is their ability to operate at varying speeds. This allows flexible adjustment to the respective air demand and ensures energy-efficient use. Especially the models of the KOMPBERG® BSDF series from BERG Compressors stand out for their variable speed and high efficiency.

What is Special about BERG Screw Compressors?

BERG Compressors GmbH specializes in the development and production of high-quality screw compressors. The KOMPBERG® BSDF series offers outstanding efficiency and reliability. With a large, slow-running air end and an energy-saving CMC controller, these compressors provide impressive performance across the entire control range.

A key advantage of BERG screw compressors is the direct drive, which reduces the number of required components and eliminates transmission losses. This not only leads to increased efficiency but also to longer service life and lower maintenance costs. Additionally, the noise levels of BERG screw compressors are significantly lower, contributing to a more pleasant working environment.

All models in the BSDF series can be fully serviced without additional maintenance, which further reduces operating costs and increases reliability. The combination of these features makes BERG screw compressors an ideal choice for companies that value quality and efficiency.

At BERG, you will also find an excellent selection of extensions for your compressed air treatment, such as compressed air filters or air compressor water separators.

For Which Applications and Industries are BERG Screw Compressors Suitable?

BERG compressors are versatile and suitable for a variety of industries. These include:

  • Manufacturing industry: For supplying production lines and machinery with constant compressed air.
  • Mechanical engineering: To support tools and manufacturing processes.
  • Food production: For hygienic and efficient compressed air applications.
  • Healthcare: For providing medical compressed air in hospitals and clinics.
  • Automotive industry: For painting, pneumatic tools, and other applications.

The high efficiency and reliability of BERG screw compressors make them the preferred choice for technical managers in all-sized production companies who focus on sustainability and cost reduction.

Technical Data of screw compressor KOMPBERG® BSDF

Modell Capacity
min-max [m3/m]
Power transmission
Noise Level Nominal motor power Air connection
7,5 bar 10 bar 13 bar [mm]   [dB] [KW]  
BSDF 22 0,9 - 3,7 0,9 - 3,1 - 720x1300x1460 Direct drive 70 22 G 3/4
BSDF 30 1,7 - 5,3 1,5 - 4,4 1,2 - 3,3 1750x900x1450 Direct drive 75 30 G 1 1/2
BSDF 37 1,6 - 6,4 1,6 - 5,4 1,6 - 4,8 1750x900x1450 Direct drive 75 37 G 1 1/2
BSDF 45 2,4 - 7,7 2,5 - 7 2 - 5,8 2000x1000x1640 Direct drive 75 45 G 1 1/2
BSDF 55 2,6 - 9,9 2,5 - 8,5 2,3 - 6,6 2000x1000x1640 Direct drive 75 55 G 1 1/2
BSDF 75 4,6 - 13,6 3,6 - 12,3 3,5 - 9,4 2100x1030x1670 Direct drive 75 75 G 2
BSDF 90 4,6 - 16,2 4,2 - 13,6 3,4 - 11,4 2550x1485x2130 Direct drive 83 90 G 2
BSDF 110 9,6 - 19,2 8,4 - 16,9 7 - 14,1 2550x1485x2130 Direct drive 83 110 G 2
BSDF 132 11,5 - 23 10,2 - 20,5 8,3 - 16,5 3300x1600x1800 Direct drive 83 132 G 2 1/2
BSDF 160 15 - 30 12,3 - 24,5 11,3 - 22,6 3300x1600x1800 Direct drive 83 160 G 2 1/2
BSDF 200 17,3 - 34,6 15,5 - 31 13 - 26,1 4000x2100x2200 Direct drive 85 200 DN 100
BSDF 250 20 - 40 18 - 36 15 - 30 4000x2100x2200 Direct drive 85 250 DN 100