PUREBERG® Z 1200 V Activated carbon tower

ATLAS COPCO (type) 195 BERG alternative element filter Special item for ATLAS COPCO Alternative Element Filter BAC (type) 195 equals to atlas copco (type) 170 / atlas copco (type) 195       Atlas copco Element filter BERG Element filter BERG Item number DD 170 / DD 195 BAC DD 195/M 38321952 PD 170 / PD 195 BAC PD 195/S 38321953 QD 170 / QD 195 BAC QD 195/A 38321954     DD PD QD Particle retention 0,1 µm 0,01 µm activated carbon Solids - q. class (ISO 8573-1) 2 1 1* Oils -q. class (ISO 8573-1) 2 1 1 Filter media h; borosilicate microfibers activated carbon Operating temp. range[℃] 1,5 to 65 1,5 to 65 1,5 to 45 Diff. pressure (new) [mbar] 50 80 60 *Valid if "S" filter cartridge is installed upstream according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

World class oil-free compression element • 100 % oil-free rotary screw compression • High quality compressed air • Low speed to capacity ratio • High overall efficiency with superior rotor coating and element cooling jackets • No oil disposal problems downstream as air is completely oil-free • Two compression stage with Air cooled system Technical Data of Oil free Screw Compressor KOMPBERG® ZXF55 Oil-free two-stage screw compressor ZXF 55 Overpressure [bar] 8 / 10 Fixed capacity:   Capacity [m3/m] [ 8 bar ] 7.9 Capacity [m3/m] [ 10 bar ] 6.6 Dimension (LxWxH) [mm] 2500 x 1400 x 2000 Compressed air connection G 1 1/2 Weight [kg] 3400 Ambient temperature [°C] +5 ÷ +40 Cooling air demand [m³/h] 16500 Compressed air temperature on the outlet [°C] approx.10 - 15 degrees above ambient temperature Sound level L [dB(A)] 85 Power transmission direct drive Nominal motor power [kW] 55 Nominal fan motor power [kW] 4 Feed voltage [V] 400 Recommended power feed cable [mm2 ] 3x50+PE Protection fuse [A] 125   Downloads Technical Data Oil free Screw Compressor KOMPBERG® ZX55 , PDF( Size: 110 KB ) Proceeding before the first Screw Compressors Operation ( Size: 700 KB ) Oil free Screw Compressor Operating and Maintenance of Controller ( Size: 410 KB ) Oil free Screw Compressor Operating and Maintenance MANUAL 55 KW ( Size: 702 KB ) Spare parts and maintenance kit Oil free Screw Compressor KOMPBERG® ZX55 (Size: 143 KB ) Safety data sheet PNEUMOIL SM46-TURBO OIL T46 , PDF( Size: 2.7 MB )

Particle counter PC 400 - stationary solution Particle counter PC 400 - stationary solution according to ISO 8573 The highly precise optical particle counter PC 400 measures particles from a size of 0.1 µm and is therefore suitable for monitoring of the compressed air quality class 1 (ISO 8573). The correct function the filtration elements mounted in the compressed air is monitored and possible filter perforations are recognized immediately. The compressed air flow through the particle counter is automatically supervised. Product Order No. PC 400 particle counter up to 0.1 µm for compressed air and gases, incl. pressure reducer and calibration certificate 0699 0040 Connection cable for probes 5 m, with open ends 0553 0108 DS 400 chart recorder with graphic display and touch screen operation 0500 4000 D   Advantages at a glance: • Highly precise, optical laser particle counter for use in compressed air and technical gases • Highly precise optics for detecting the smallest particles up to 0.1 μm and therefore suitable for monitoring the compressed air class 1 according to ISO 8573-1 • The flow rate of 28.3 l/min (1 cfm) is 10 times higher than that of the particle counters generally available on the market (usually 2.83 l/min). Advantage: Counts the smallest particles with high counting accuracy at the same time • Due to the digital data transfer (Modbus-RTU) to the chart recorders DS 400 or DS 500, 3 measuring channels can be transferred at the same time (without any faults due to check sum) • The class 1 filter which is included in the scope of delivery can be used for on-site calibration at any time. Contaminations on the optics can therefore be quickly detected or eliminated. TECHNICAL DATA PC 400 Measured medium: Compressed air (free from aggressive, corrosive, acid, toxic, flammable and oxidising components) as well as gas types like N2, O2, CO2. Further gas types on request Field of application: In case of compressed air after filtration In case of gases / pure gases also without filtration Parameter: Number of particles per m³ (relative to expanded air: 20 °C, 1000 hPa) Size channels for the PC 400 0.1 µm: Particle size 0.1…0.5 µm: Number or particles per m³ Particle size 0.5…1.0 µm: Number or particles per m³ Particle size 1.0…5.0 µm: Number or particles per m³ Size channels for the PC 400 0.3 µm: Particle size 0.3…0.5 µm: Number or particles per m³ Particle size 0.5…1.0 µm: Number or particles per m³ Particle size 1.0…5.0 µm: Number or particles per m³ Operating pressure: Max. input pressure on the pressure reducer: 40 bar Humidity of measured gas: <= 90% rel. humidity, pressure dew point max. 10 °C, non-condensable humidity Ambient temparature: 5...40 °C Temperature of the measured medium: 0...70 °C Compressed air connection: 6 mm PTFE-hose incl. quick coupling Flow rate: 28,3 l/min (1 cfm) Interface: RS 485 (Modbus-RTU) Light source: Laser diode Power supply: 24 VDC, 300 mA Dimensions: 150 x 200 x 300 mm Weight: 8 kg Housing: Stainless steel Stationary solution in combination with DS 400 PC 400 particle counter up to 0.1 µm for compressed air and gases incl. pressure reducer Connection cable 5 m DS 400 chart recorder with graphic display and touch screen operation Option: Integrated data logger for 100 million measured values Option: Integrated ethernet and RS 485 interface CS Soft Basic - data evaluation in graphic and table form - reading out of the measured data via USB or Ethernet Alternative version to PC 400 up to 0.1 µm: PC 400 paticle counter up to 0.3 µm for compressed air and gases incl. pressure reducer