PUREBERG®, Filter & Water Separator

Compressed air cyclone separator, PUREBERG F01WW A compressed air cyclone separator, also known as a water separator or condensate separator, is a crucial component in compressed air systems. Its main job is to remove moisture and water droplets from the air, keeping the compressed air dry and clean. Moisture in compressed air can cause problems like rust, blocked lines, and harm to machinery, helping to prevent damage to your equipment. The PUREBERG® F01WW water separation system, working as a compressed air cyclone separator, is well-known in the industry. It can handle flow rates of up to 72 m3/h at 7 bar pressure. Its smart design uses centrifugal force to effectively separate water from the airflow. When moist air goes through the cyclone separator, the centrifugal force makes water droplets separate and gather at the bottom of the separator. Selecting the right water separator for your compressed air system is essential and depends on factors such as flow rate, pressure, ambient temperature, and specific application requirements. The PUREBERG® F01WW water separator offers reliable moisture removal, contributing to cleaner air, improved operations, and prolonged machinery lifespan. Buying a top-notch water separator like the PUREBERG® F01WW ensures your compressed air system works at its best. It protects your compressors and dryers from moisture problems, keeping them running smoothly. Water separator with comprehensive rate and outstanding efficiency PURBERG® F—WW, is one of the BERG products, a water separator which has been developed for high-efficiency removal of bulk liquids from compressed air up to 20 bar. Inside the housing, there is an insert with vanes that creates a controlled rotation of the air. As a result of centrifugal action water and large particles are forced to the housing wall, slowed down, and accumulate at the bottom of the separator housing as condensate. The turbulent free zone in the lower part of the filter housing prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate from the BERG water separator it is essential to install an electronic zero-loss condensate drain, Made in Germany. Technical data of water separator Water separator PUREBERG® F01WW Operating pressure [bar] 0 - 20 Pipe Size [inch] 3/8 Flow Capacity [m3/h] 72 Flow Capacity [Scfm] 42 Dimensions (AxBxCxD) [mm] 187 x 88 x 20 x 80 Volume [l] 0,47 Weight [kg] 0,7 Operating temperature [°C] 1,5 - 65 Housing material Aluminum Cover ABS Sealing NBR Corrosion protection Stainless Steel 1.4301 Outside protection Anodized (optional) Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Water separator Installation And Operating Manual , PDF ( Size: 490 KB )

Maximize Air Quality: Discover PUREBERG F02WW Water Separator A water separator, also called a condensate separator, is a device that removes moisture and water from an airflow. In the area of air compressors and compressed air systems, the water separator filter is important to ensure that the air remains dry. Moisture in the compressed air can otherwise lead to problems such as rust, blocked lines and damage to machines. The water separator PUREBERG® F02WW, (96 m3/h at 7 bar) is a widely used example in the industry. The water separator works through various mechanisms to separate the condensate from the air. In most cases it uses centrifugal force or gravity to remove the water from the airflow. As the damp air moves through the separator, the forces pull water droplets out of the air, gathering them at the bottom. Then, you can take out the collected water from the system either by hand or automatically. Please note during buying water separators, the different types of water separators, including condensate separators for air compressors, compressed air lines, or industrial applications. Choosing the right water separator for the device depends on various factors. These include flow rate, pressure, ambient temperature, and the specific requirements of the program. In summary, the water separator is crucial in compressed air systems. It helps make the air cleaner, improve operations and make machines last longer. Function of water separator The compressed air enters the fuel water separator through the curved inlet. Specially shaped guide vanes then induce a high-speed rotational movement, forcing the compressed air into a circular motion. Centrifugal forces direct water droplets to the outside of the filter housing, where they flow downward into the collection chamber by gravity.The shielding of the collection area calms the airflow to prevent swirling and entrainment of separated liquids. Additionally, a specially designed riser pipe in the water separator prevents particle transfer into the upwardly rotating stream of cleaned compressed air.The innovative water separator rectifier from BERG KOMPRESSOREN directs compressed air to the outlet and significantly reduces flow losses. Technical data of water separator Water separator PUREBERG® F02WW Operating pressure [bar] 0 - 20 Pipe Size [inch] 1/2 Flow Capacity [m3/h] 96 Flow Capacity [Scfm] 56 Dimensions (AxBxCxD) [mm] 256 x 88 x 20 x 80 Volume [l] 0,6 Weight [kg] 0,8 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Stainless Steel 1.4301 Outside protection Anodized (optional) Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Water separator Installation And Operating Manual , PDF ( Size: 490 KB )

Protect Your Compressed Air System: Introducing PUREBERG F03WW Water Separator A water separator, also called a condensate separator, is a device that removes moisture and water from an airflow. In the area of air compressors and compressed air systems, the water separator is important to ensure that the air remains dry. Moisture in the compressed air can otherwise lead to problems such as rust, blocked lines and damage to machines. The water separator PUREBERG® F03WW, (150 m3/h at 7 bar) is a widely used example in the industry. The water separator filter for air compressor works through various mechanisms to separate the condensate from the air. In most cases it uses centrifugal force or gravity to remove the water from the airflow. As the wet air moves through the separator, these forces pull the water droplets out of the air, gathering them at the bottom. Then, you can take out the collected water from the system either by hand or automatically. Different types of compressor water separator, including condensate separators for air compressors, compressed air lines, or industrial applications. Choosing the right water separator for the device depends on various factors. These include flow rate, pressure, ambient temperature, and the specific requirements of the program. In summary, the moisture separator for air compressor is crucial in compressed air systems. It helps make the air cleaner, improve operations, and make machines last longer. Do BERG Kompressoren PUREBERG F—WW (water separators) have changeable elements? NO, BERG compressed air water separators rely on physical principles such as centrifugal force and subsequent condensation to separate water from compressed air without the need for replaceable filter elements. This design reduces the need for frequent maintenance associated with replacing filter elements. However, periodic inspection and maintenance of the separator unit itself may still be necessary to ensure optimal performance and efficiency over time. Technical data of water separator Water separator PUREBERG® F03WW Operating pressure [bar] 0 - 20 Pipe Size [inch] 1/2 Flow Capacity [m3/h] 150 Flow Capacity [Scfm] 88 Dimensions (AxBxCxD) [mm] 278 x 106 x 25 x 100 Volume [l] 1,2 Weight [kg] 1,3 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Stainless Steel 1.4301 Outside protection Anodized (optional) Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Water separator Installation And Operating Manual , PDF ( Size: 490 KB )

Ensure Dry Air Supply: PUREBERG F04WW Water Separator Solution A water separator, also called a condensate separator, is a device that removes moisture and water from an air flow. In the area of air compressors and compressed air systems, the water separator is important to ensure that the air remains dry. Moisture in the compressed air can otherwise lead to problems such as rust, blocked lines and damage to machines. The water separator PUREBERG® F04WW, (216 m3/h at 7 bar) is a widely used example in the industry. The water separator filter works through various mechanisms to separate the condensate from the air. In most cases it uses centrifugal force or gravity to remove the water from the airflow. As the moist air flows through the separator, the water droplets are pulled out of the air by these forces and collect at the bottom of the separator. From there, the accumulated water can be removed from the system either manually or automatically. Different types of water separators, including condensate separators for air compressors, compressed air lines or industrial applications. Choosing the right water separator for the device depends on various factors. These include: flow rate, pressure, ambient temperature and the specific requirements of the program. In summary, the water separator is important in compressed air systems. It helps make the air cleaner, improve operations and make machines last longer. Why BERG Kompressoren use water separators with condensate drain BEKOMAT 20? The BEKOMAT 20 condensate drain is a popular choice for use with water separators, air compressor water traps, air compressor water filters, and air compressor moisture traps in air compressor systems because of its efficiency, reliability, and effectiveness in removing condensate from the compressed air stream. Here are some reasons why the BEKOMAT 20 is mandatory used for all BERG compressed air water separators: Automatic Operation: The BEKOMAT 20 is an automatic condensate drain that operates based on the level of condensate in the system. It uses a float mechanism to detect the presence of condensate and opens the drain valve to discharge it without the need for manual intervention. Energy Efficiency: The BEKOMAT 20 is designed to minimize energy consumption by only discharging condensate when necessary, thereby reducing air loss and saving energy costs. Reliable Performance: The BEKOMAT 20 is known for its robust construction and reliable operation, making it suitable for demanding industrial applications where consistent condensate removal is essential. Maintenance-Free Design: The BEKOMAT 20 requires minimal maintenance and has a long service life, providing a hassle-free solution for managing condensate in air compressor systems. Compatibility: The BEKOMAT 20 is compatible with a wide range of air compressor systems and can be easily integrated with water separators to ensure efficient condensate removal. Overall, the BEKOMAT 20 condensate drain is a trusted solution for water separators due to its automatic operation, energy efficiency, reliability, and compatibility with various air compressor systems. Using the BEKOMAT 20 can help optimize the performance of your water separator and ensure the effective removal of condensate from your compressed air system. Technical data of water separator Water separator PUREBERG® F04WW Operating pressure [bar] 0 - 20 Pipe Size [inch] 3/4 Flow Capacity [m3/h] 216 Flow Capacity [Scfm] 127 Dimensions (AxBxCxD) [mm] 278 x 106 x 25 x 100 Volume [l] 1,2 Weight [kg] 1,3 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Stainless Steel 1.4301 Outside protection Anodized (optional) Included BEKOMAT 20 Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63  Downloads Water separator Installation And Operating Manual , PDF ( Size: 490 KB )

Combat Rust and Damage: PUREBERG F05WW Water Separator Overview A water separator, also called a condensate separator, is a device that removes moisture and water from an air flow. In the area of air compressors and compressed air systems, the water separator is important to ensure that the air remains dry. Moisture in the compressed air can otherwise lead to problems such as rust, blocked lines and damage to machines. The water separator PUREBERG® F05WW, (282 m3/h at 7 bar) is a widely used example in the industry. The water separator works through various mechanisms to separate the condensate from the air. In most cases it uses centrifugal force or gravity to remove the water from the airflow. As the moist air flows through the separator, the water droplets are pulled out of the air by these forces and collect at the bottom of the separator. From there, the accumulated water can be removed from the system either manually or automatically. There are different types of water separators, including condensate separators for air compressors, compressed air lines or industrial applications. Choosing the right water separator for the device depends on various factors. These include: flow rate, pressure, ambient temperature and the specific requirements of the program. In summary, the water separator is very important in compressed air systems. It helps make the air cleaner, improve operations and make machines last longer. Why we need water separators PUERBERG F--WW for our air compressor? Compressed air cyclone separators are important in air compressor systems because they filter moisture and dirt from compressed air before it reaches other equipment and processes. Here are some key reasons why air compressor water separators are necessary:Moisture in compressed air can cause equipment, pipes and tools to rust and shorten their lifespan. Water separators help remove this moisture, preventing corrosion and extending the life of the system. Water and dirt in the compressed air can damage downstream devices. Water separators ensure that these devices receive clean, dry air, preventing damage and problems. Water separators improve the quality of compressed air by removing moisture, oil and dirt. This makes the compressed air work better and is safe for various applications. Moisture in compressed air can affect the performance of air-powered equipment and increase energy consumption. Water separators help remove water and dirt, improving the efficiency of air compressor systems and increasing productivity. Overall, BERG's PUREBERG® F-WW compressed air water separators are very important for air compressor systems. They ensure that clean, dry air reaches downstream devices. When companies purchase good water separators, they can prevent expensive repairs and breakdowns that can result from dirty compressed air. Technical data of water separator Water separator PUREBERG® F05WW Operating pressure [bar] 0 - 20 Pipe Size [inch] 1 Flow Capacity [m3/h] 282 Flow Capacity [Scfm] 166 Dimensions (AxBxCxD) [mm] 252 x 125 x 32 x 120 Volume [l] 1,57 Weight [kg] 2,1 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Stainless Steel 1.4301 Outside protection Anodized (optional) Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Water separator Installation And Operating Manual , PDF ( Size: 490 KB )

Water separator for compressors - PUREBERG - F09WW A water separator, also called a condensate separator, is a device that removes moisture and water from an air flow. In the area of air compressors and compressed air systems, the water separator is important to ensure that the air remains dry. Moisture in the compressed air can otherwise lead to problems such as rust, blocked lines and damage to machines. The water separator PUREBERG® F09WW, (510 m3/h at 7 bar) is a widely used example in the industry. The water separator works through various mechanisms to separate the condensate from the air. In most cases it uses centrifugal force or gravity to remove the water from the airflow. As the moist air flows through the separator, the water droplets are pulled out of the air by these forces and collect at the bottom of the separator. From there, the accumulated water can be removed from the system either manually or automatically. Different types of water separators, including condensate separators for air compressors, compressed air lines or industrial applications. Choosing the right water separator for the device depends on various factors. These include: flow rate, pressure, ambient temperature and the specific requirements of the program. In summary, the water separator is important in compressed air systems. It helps make the air cleaner, improve operations and make machines last longer. Can a water separator be considered a filter? A water separator is not the same as a filter, although they serve similar purposes in an air compressor system. A water separator is specifically designed to remove moisture and condensate from compressed air, while a filter is used to remove particulates, oil, and other contaminants from the air. Compressed air water separators typically use a combination of baffles, centrifugal force, and other mechanisms to separate water droplets from the compressed air stream. As the air passes through the separator, the moisture condenses and collects at the bottom of the unit, where it can be drained out of the system. Filters, on the other hand, are designed to capture solid particles, oil droplets, and other impurities that may be present in the compressed air. Filters can be made of different materials and have various filtration ratings to target specific contaminants based on the requirements of the application. While both water separators and filters play crucial roles in maintaining the quality of compressed air and protecting downstream equipment, they have distinct functions and are often used together in air compressor systems to ensure optimal performance and efficiency. Technical data of water separator Water separator PUREBERG® F09WW Operating pressure [bar] 0 - 20 Pipe Size [inch] 1 1/2 Flow Capacity [m3/h] 510 Flow Capacity [Scfm] 300 Dimensions (AxBxCxD) [mm] 450 x 125 x 32 x 160 Volume [l] 3,0 Weight [kg] 3,2 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Stainless Steel 1.4301 Outside protection Anodized (optional) Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Water separator Installation And Operating Manual , PDF ( Size: 490 KB )

Increase efficiency with PUREBERG F15WW Water Separator for Compressed Air Systems A water separator, also called a condensate separator, is a device that removes moisture and water from an air flow. In the area of air compressors and compressed air systems, the water separator is important to ensure that the air remains dry. Moisture in the compressed air can otherwise lead to problems such as rust, blocked lines and damage to machines. The water separator PUREBERG® F15WW, (888 m3/h at 7 bar) is a widely used example in the industry. The water separator works through various mechanisms to separate the condensate from the air. In most cases it uses centrifugal force or gravity to remove the water from the airflow. As the moist air flows through the separator, the water droplets are pulled out of the air by these forces and collect at the bottom of the separator. From there, the accumulated water can be removed from the system either manually or automatically. There are different types of water separators, including condensate separators for air compressors, compressed air lines or industrial applications. Choosing the right water separator for the device depends on various factors. This includes the flow rate, pressure, ambient temperature and the specific requirements of the program. In summary, the water separator is very important in compressed air systems. It helps to improve air quality, optimize operations and extend the life of machines. What happens if our compressed air systems do not have a proper water separator with condensate drainage, such as: B. BEKOMAT 20? A compressed air water separator without a suitable condensate drain like the BEKOMAT 20 causes several problems in your compressed air system: Contamination: Water and oil condensate can accumulate in the air system, leading to contamination of the compressed air. This can affect the quality of the compressed air and potentially damage downstream equipment and processes. Corrosion: Water in compressed air can corrode system components, resulting in shortened service life and failure. Reduced efficiency: Water in compressed air can reduce system performance and efficiency, resulting in increased energy consumption and higher operating costs. Maintenance issues: Without a proper water separator and condensate drain, you may need to manually drain condensate from the system, which can be time-consuming and may not be as effective as an automated system like the BEKOMAT 20. Overall, having a suitable water separator with a condensate drain is essential for maintaining the performance, efficiency, and reliability of your compressed air system. Technical data of water separator Water separator PUREBERG® F15WW Operating pressure [bar] 0 - 20 Pipe Size [inch] 2 Flow Capacity [m3/h] 888 Flow Capacity [Scfm] 522 Dimensions (AxBxCxD) [mm] 605 x 160 x 43 x 180 Volume [l] 6,0 Weight [kg] 5,1 Operating temperature [°C] 1,5 - 65 Housing material Aluminum Cover ABS Sealing NBR Corrosion protection Stainless Steel 1.4301 Outside protection Anodized (optional) Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Water separator Installation And Operating Manual , PDF ( Size: 490 KB )

Optimize Operations: PUREBERG F24WW Water Separator Solution A water separator, also called a condensate separator, is a device that removes moisture and water from an air flow. In the area of air compressors and compressed air systems, the water separator is important to ensure that the air remains dry. Moisture in the compressed air can otherwise lead to problems such as rust, blocked lines and damage to machines. The water separator PUREBERG® F24WW, (1440 m3/h at 7 bar) is a widely used example in the industry. The water separator works through various mechanisms to separate the condensate from the air. In most cases it uses centrifugal force or gravity to remove the water from the airflow. As the moist air flows through the separator, the water droplets are pulled out of the air by these forces and collect at the bottom of the separator. From there, the accumulated water can be removed from the system either manually or automatically. There are different types of water separators, including condensate separators for air compressors, compressed air lines or industrial applications. Choosing the right water separator for the device depends on various factors. These include: flow rate, pressure, ambient temperature and the specific requirements of the program. In summary, the water separator is very important in compressed air systems. It helps make the air cleaner, improve operations and make machines last longer. How often should water separators PUREBERG FWW be cleaned? The frequency of cleaning water separators like the PUREBERG FWW will depend on several factors, including the operating conditions of your compressed air system, the level of contaminants in the air, and the manufacturer's recommendations. However, as a general guideline, it is typically recommended to clean water separators at least once every 3 to 6 months. Regular cleaning of water separators is essential to ensure their optimal performance and efficiency in removing moisture and contaminants from the compressed air. Accumulated dirt, debris, and moisture can impair the functionality of the separator, leading to reduced air quality, increased energy consumption, and potential damage to downstream equipment.  When cleaning a water separator like the PUREBERG FWW, follow these steps: Shut down the compressed air system: Before starting the cleaning process, make sure to shut down the compressed air system and depressurize the lines to prevent any accidents or injuries. Remove the water separator: Carefully disconnect the water separator from the compressed air system according to the manufacturer's instructions. This may involve loosening fittings, disconnecting hoses, or removing mounting brackets. Inspect and clean the separator: Inspect the interior of the water separator for any dirt, debris, or moisture buildup. Use a soft brush, cloth, or compressed air to remove any contaminants from the separator's components, such as the filter element or drain valve. Check for damage: While cleaning the water separator, inspect it for any signs of damage, such as cracks, leaks, or corrosion. Replace any damaged parts to ensure the separator functions properly. Reassemble and reinstall: Once the water separator is clean and free of debris, reassemble it according to the manufacturer's instructions. Reinstall the separator back into the compressed air system and secure it in place. Test the system: After cleaning and reinstallation, test the compressed air system to ensure that the water separator is functioning correctly and effectively removing moisture from the air. By following these steps and cleaning your water separators like the PUREBERG FWW on a regular basis, you can maintain the efficiency and performance of your compressed air system and prolong the lifespan of the equipment. Technical data of water separator Water separator PUREBERG® F24WW Operating pressure [bar] 0 - 20 Pipe Size [inch] 2 1/2 Flow Capacity [m3/h] 1440 Flow Capacity [Scfm] 847 Dimensions (AxBxCxD) [mm] 685 x 160 x 43 x 200 Volume [l] 6,5 Weight [kg] 6,3 Operating temperature [°C] 1,5 - 65 Housing material Aluminum Cover ABS Sealing NBR Corrosion protection Stainless Steel 1.4301 Outside protection Anodized (optional) Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Water separator Installation And Operating Manual , PDF ( Size: 490 KB )

Efficient Moisture Removal: PUREBERG F46WW Water Separator for air Compressors A water separator, also called a condensate separator, is a device that removes moisture and water from an air flow. In the area of air compressors and compressed air systems, the water separator is important to ensure that the air remains dry. Moisture in the compressed air can otherwise lead to problems such as rust, blocked lines and damage to machines. The water separator PUREBERG® F46WW, (2760 m3/h at 7 bar) is a widely used example in the industry. The water separator works through various mechanisms to separate the condensate from the air. In most cases it uses centrifugal force or gravity to remove the water from the airflow. As the moist air flows through the separator, the water droplets are pulled out of the air by these forces and collect at the bottom of the separator. From there, the accumulated water can be removed from the system either manually or automatically. There are different types of water separators, including condensate separators for air compressors, compressed air lines or industrial applications. Choosing the right water separator for the device depends on various factors. These include: flow rate, pressure, ambient temperature and the specific requirements of the program. In summary, the water separator is very important in compressed air systems. It helps make the air cleaner, improve operations and make machines last longer. Water separator with comprehensive rate and outstanding efficiency PURBERG® water separator have been developed for high-efficiency removal of bulk liquids from compressed air and vacuum systems up to 20 bar. Inside the housing, there is an insert with vanes that creates a controlled rotation of the air. As a result of centrifugal action liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the filter housing prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate from the F-WW water separator it is essential to install automatic or electronic condensate drain. Function of water separator Compressed air enters the water separator through the curved inlet and then specially shaped guide vanes ensure a special rotational movement at high speed and force the compressed air into a circular movement. After the resulting centrifugal forces direct the water droplets to the outside of the filter housing, the droplets flow down into the collection chamber due to gravity. Shielding the collecting area Calms the air flow in this area in order to effectively avoid whirling up and entrainment of already separated liquids. In water separator a specially designed riser tube prevents particle transfer to the upward rotating flow of the compressed air, which has largely been cleaned of condensate. The innovative water separator rectifier leads the compressed air to the outlet and reduces flow losses to a minimum. Technical data of water separator Water separator PUREBERG® F46WW Operating pressure [bar] 0 - 20 Pipe Size [inch] 3 Flow Capacity [m3/h] 2760 Flow Capacity [Scfm] 1624 Dimensions (AxBxCxD) [mm] 800 x 240 x 60 x 300 Volume [l] 19,0 Weight [kg] 12,9 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Stainless Steel 1.4301 Outside protection Anodized (optional) Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Water separator Installation And Operating Manual , PDF ( Size: 490 KB )

Compressed air filter PUREBERG® F02(Type)W ,96 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter CONDENSATE Max. operating pressure 20 bar  Volume flow rate 96 to 2760 Nm3/h  Connections 1/2" bis 3"  Operating temp. range +2 bis 65° Technical Data of Compressed air filter  Compressed air filter PUREBERG® F02(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 1/2 Flow Capacity [m3/h] 96 Flow Capacity [Scfm] 56 Dimensions (AxBxCxD) [mm] 256 x 88 x 20 x 80 Volume [l] 0,6 Weight [kg] 0,8 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)     G General Filter F Fine Filter S Superfine Filter A ​Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Compressed air filter PUREBERG® F03(Type)W ,150 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter The perfect choice Virtually abrasion-free Integrated particle removal Easily adapted checking system Simple cartridge replacement Flow optimized housing Comprehensive line Technical Data of Compressed air filter  Compressed air filter PUREBERG® F03(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 1/2 Flow Capacity [m3/h] 150 Flow Capacity [Scfm] 88 Dimenstions (AxBxCxD) [mm] 278 x 106 x 25 x 100 Volume [l] 1,2 Weight [kg] 1,3 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)       G General Filter F Fine Filter S Superfine Filter A Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Compressed air filter PUREBERG® F04(Type)W ,216 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter Innovative features mean outstanding performance without compromise  Compressed air filter PURBERG® housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons, odour vapours from com­pressed air systems. To meet the required com­pressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Housing prevents condensate from being picked up and "car­ried over" into the airstream. The BERG compressed air filter technolo­gy guarantees low operating costs, long service life, outstanding process reliability, and safe filtration.    Technical Data of Compressed air filter  Compressed air filter PUREBERG® F04(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 3/4 Flow Capacity [m3/h] 216 Flow Capacity [Scfm] 127 Dimensions (AxBxCxD) [mm] 278 x 106 x 25 x 100 Volume [l] 1,2 Weight [kg] 1,3 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)       G General Filter F Fine Filter S Superfine Filter A Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Compressed air filter PUREBERG® F05(Type)W ,282 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter Innovative features mean outstanding performance without compromise  Compressed air filter PURBERG® housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons, odour vapours from com­pressed air systems. To meet the required com­pressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Housing prevents condensate from being picked up and "car­ried over" into the airstream. The BERG compressed air filter technolo­gy guarantees low operating costs, long service life, outstanding process reliability, and safe filtration.    Technical Data of Compressed air filter  Compressed air filter PUREBERG® F05(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 1 Flow Capacity [m3/h] 282 Flow Capacity [Scfm] 166 Dimenstions (AxBxCxD) [mm] 252 x 125 x 32 x 120 Volume [l] 1,57 Weight [kg] 2,1 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)     G General Filter F Fine Filter S Superfine Filter A Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Compressed air filter PUREBERG® F06(Type)W ,360 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter Innovative features mean outstanding performance without compromise  Compressed air filter PURBERG® housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons, odour vapours from com­pressed air systems. To meet the required com­pressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Housing prevents condensate from being picked up and "car­ried over" into the airstream. The BERG compressed air filter technolo­gy guarantees low operating costs, long service life, outstanding process reliability, and safe filtration.    Technical Data of Compressed air filter  Compressed air filter PUREBERG® F06(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 1 Flow Capacity [m3/h] 360 Flow Capacity [Scfm] 212 Dimenstions (AxBxCxD) [mm] 352 x 125 x 32 x 140 Volume [l] 2,2 Weight [kg] 2,4 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)       G General Filter F Fine Filter S Superfine Filter A ​Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Compressed air filter PUREBERG® F09(Type)W ,510 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter Innovative features mean outstanding performance without compromise  Compressed air filter PURBERG® housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons, odour vapours from com­pressed air systems. To meet the required com­pressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Housing prevents condensate from being picked up and "car­ried over" into the airstream. The BERG compressed air filter technolo­gy guarantees low operating costs, long service life, outstanding process reliability, and safe filtration.    Technical Data of Compressed air filter  Compressed air filter PUREBERG® F09(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 1 1/2 Flow Capacity [m3/h] 510 Flow Capacity [Scfm] 300 Dimenstions (AxBxCxD) [mm] 450 x 125 x 32 x 160 Volume [l] 3,0 Weight [kg] 3,2 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)       G General Filter F Fine Filter S Superfine Filter A Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Compressed air filter PUREBERG® F13(Type)W ,750 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter Innovative features mean outstanding performance without compromise  Compressed air filter PURBERG® housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons, odour vapours from com­pressed air systems. To meet the required com­pressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Housing prevents condensate from being picked up and "car­ried over" into the airstream. The BERG compressed air filter technolo­gy guarantees low operating costs, long service life, outstanding process reliability, and safe filtration.    Technical Data of Compressed air filter  Compressed air filter PUREBERG® F13(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 1 1/2 Flow Capacity [m3/h] 750 Flow Capacity [Scfm] 441 Dimenstions (AxBxCxD) [mm] 450 x 125 x 32 x 160 Volume [l] 3,0 Weight [kg] 3,2 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)       G General Filter F Fine Filter S Superfine Filter A Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Compressed air filter PUREBERG® F15(Type)W ,888 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter Innovative features mean outstanding performance without compromise  Compressed air filter PURBERG® housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons, odour vapours from com­pressed air systems. To meet the required com­pressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Housing prevents condensate from being picked up and "car­ried over" into the airstream. The BERG compressed air filter technolo­gy guarantees low operating costs, long service life, outstanding process reliability, and safe filtration.    Technical Data of Compressed air filter  Compressed air filter PUREBERG® F15(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 2 Flow Capacity [m3/h] 888 Flow Capacity [Scfm] 522 Dimensions (AxBxCxD) [mm] 605 x 160 x 43 x 180 Volume [l] 6,0 Weight [kg] 5,1 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)       G General Filter F Fine Filter S Superfine Filter A Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Compressed air filter PUREBERG® F20(Type)W ,1176 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter Innovative features mean outstanding performance without compromise  Compressed air filter PURBERG® housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons, odour vapours from com­pressed air systems. To meet the required com­pressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Housing prevents condensate from being picked up and "car­ried over" into the airstream. The BERG compressed air filter technolo­gy guarantees low operating costs, long service life, outstanding process reliability, and safe filtration.    Technical Data of Compressed air filter  Compressed air filter PUREBERG® F20(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 2 Flow Capacity [m3/h] 1176 Flow Capacity [Scfm] 692 Dimensions (AxBxCxD) [mm] 605 x 160 x 43 x 180 Volume [l] 6,0 Weight [kg] 5,1 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)       G General Filter F Fine Filter S Superfine Filter A Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Compressed air filter PUREBERG® F24(Type)W ,1440 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter Innovative features mean outstanding performance without compromise  Compressed air filter PURBERG® housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons, odour vapours from com­pressed air systems. To meet the required com­pressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Housing prevents condensate from being picked up and "car­ried over" into the airstream. The BERG compressed air filter technolo­gy guarantees low operating costs, long service life, outstanding process reliability, and safe filtration.    Technical Data of Compressed air filter  Compressed air filter PUREBERG® F24(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 2 1/2 Flow Capacity [m3/h] 1440 Flow Capacity [Scfm] 847 Dimenstions (AxBxCxD) [mm] 685 x 160 x 43 x 200 Volume [l] 6,5 Weight [kg] 6,3 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)     G General Filter F Fine Filter S Superfine Filter A Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Compressed air filter PUREBERG® F33(Type)W ,1968 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter Innovative features mean outstanding performance without compromise  Compressed air filter PURBERG® housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons, odour vapours from com­pressed air systems. To meet the required com­pressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Housing prevents condensate from being picked up and "car­ried over" into the airstream. The BERG compressed air filter technolo­gy guarantees low operating costs, long service life, outstanding process reliability, and safe filtration.    Technical Data of Compressed air filter  Compressed air filter PUREBERG® F33(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 3 Flow Capacity [m3/h] 1968 Flow Capacity [Scfm] 1158 Dimensions (AxBxCxD) [mm] 800 x 240 x 60 x 300 Volume [l] 19,0 Weight [kg] 12,9 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)     G General Filter F Fine Filter S Superfine Filter A Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Compressed air filter PUREBERG® F46(Type)W ,2760 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter Innovative features mean outstanding performance without compromise  Compressed air filter PURBERG® housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons, odour vapours from com­pressed air systems. To meet the required com­pressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Housing prevents condensate from being picked up and "car­ried over" into the airstream. The BERG compressed air filter technolo­gy guarantees low operating costs, long service life, outstanding process reliability, and safe filtration.    Technical Data of Compressed air filter  Compressed air filter PUREBERG® F46(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 3 Flow Capacity [m3/h] 2760 Flow Capacity [Scfm] 1624 Dimensions (AxBxCxD) [mm] 800 x 240 x 60 x 300 Volume [l] 19,0 Weight [kg] 12,9 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)     G General Filter F Fine Filter S Superfine Filter A Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Element Filter For F02(typ)W = EF02(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Element Filter For F03(typ)W= EF03(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Element Filter For F04(typ)W = EF04(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Element Filter For F05(typ)W = EF05(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Element Filter For F06(typ)W = EF06(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Element Filter For F07(typ)W = EF07(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Element Filter For F09(typ)W = EF09(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Element Filter For F13(typ)W = EF13(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Element Filter For F15(typ)W = EF15(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Element Filter For F20(typ)W = EF20(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Element Filter For F24(typ)W = EF24(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Element Filter For F33(typ)W = EF33(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Element Filter For F46(typ)W = EF46(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Flange water separator PUREBERG® FF29WW 1760Nm3/h@7bar Outstanding flange water separator rates PURBERG® flange water separator have been developed for high-efficiency removal of bulk liquids and large impurities from compressed air systems. Inside the housing of flange water separator, there is an insert that creates a controlled rotation of the air. As a result of centrifugal action liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing flange water separator prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate it is essential to install automatic or electronic condensate drain.   Technical data of flange water separator Flange water separator PUREBERG® FF29WW Operating pressure [bar] 0 - 16 Pipe Size [DN] 80 Flow Capacity [m3/h] 1760 Flow Capacity [Scfm] 1024 Dimenstions (AxBxCxD) [mm] 720 x 400 x 165 x 219 Weight [kg] 33 Operating temperature [°C] 1,5 - 65 Material carbon steel Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 Downloads Flange water separator PUREBERG FFWW Installation And Operating Manual , PDF ( Size: 1 MB )

Flange water separator PUREBERG® FF37WW 2200Nm3/h@7bar Outstanding flange water separator rates PURBERG® flange water separator have been developed for high-efficiency removal of bulk liquids and large impurities from compressed air systems. Inside the housing of flange water separator, there is an insert that creates a controlled rotation of the air. As a result of centrifugal action liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing of flange water separator prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate it is essential to install automatic or electronic condensate drain.   Technical data of flange water separator Flange water separator PUREBERG® FF37WW Operating pressure [bar] 0 - 16 Pipe Size [DN] 100 Flow Capacity [m3/h] 2200 Flow Capacity [Scfm] 1307 Dimenstions (AxBxCxD) [mm] 890 x 460 x 236 x 244 Weight [kg] 45 Operating temperature [°C] 1,5 - 65 Material carbon steel Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 Downloads Flange water separator PUREBERG FFWW Installation And Operating Manual , PDF ( Size: 1 MB )

Flange water separator PUREBERG® FF66WW 3940Nm3/h@7bar Outstanding flange water separator rates PURBERG® flange water separator have been developed for high-efficiency removal of bulk liquids and large impurities from compressed air systems. Inside the housing of flange water separator, there is an insert that creates a controlled rotation of the air. As a result of centrifugal action liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing of flange water separator prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate it is essential to install automatic or electronic condensate drain.   Technical data of flange water separator Flange water separator PUREBERG® FF66WW Operating pressure [bar] 0 - 16 Pipe Size [DN] 125 Flow Capacity [m3/h] 3940 Flow Capacity [Scfm] 2331 Dimensions (AxBxCxD) [mm] 980 x 550 x 250 x 273 Weight [kg] 58 Operating temperature [°C] 1,5 - 65 Material carbon steel Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 Downloads Flange water separator PUREBERG FFWW Installation And Operating Manual , PDF ( Size: 1 MB )

Flange water separator PUREBERG® FF 88 WW 5300Nm3/h@7bar Outstanding flange water separator rates PURBERG® flange water separator have been developed for high-efficiency removal of bulk liquids and large impurities from compressed air systems. Inside the housing of flange water separator, there is an insert that creates a controlled rotation of the air. As a result of centrifugal action liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing of flange water separator prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate it is essential to install automatic or electronic condensate drain.   Technical data of flange water separator Flange water separator PUREBERG® FF88WW Operating pressure [bar] 0 - 16 Pipe Size [DN] 150 Flow Capacity [m3/h] 5300 Flow Capacity [Scfm] 3108 Dimenstions (AxBxCxD) [mm] 1040 x 570 x 250 x 300 Weight [kg] 81 Operating temperature [°C] 1,5 - 65 Material carbon steel Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 Downloads Flange water separator PUREBERG FFWW Installation And Operating Manual , PDF ( Size: 1 MB )  

Flange water separator PUREBERG® FF97WW 5820Nm3/h@7bar Outstanding flange water separator rates PURBERG® flange water separator have been developed for high-efficiency removal of bulk liquids and large impurities from compressed air systems. Inside the housing of flange water separator, there is an insert that creates a controlled rotation of the air. As a result of centrifugal action liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing of flange water separator prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate it is essential to install automatic or electronic condensate drain.   Technical data of flange water separator Flange water separator PUREBERG® FF97WW Operating pressure [bar] 0 - 16 Pipe Size [DN] 200 Flow Capacity [m3/h] 5820 Flow Capacity [Scfm] 3426 Dimenstions (AxBxCxD) [mm] 1110 x 690 x 256 x 350 Weight [kg] 107 Operating temperature [°C] 1,5 - 65 Material carbon steel Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 Downloads Flange water separator PUREBERG FFWW Installation And Operating Manual , PDF ( Size: 1 MB )

Flange water separator PUREBERG® FF142WW 8520Nm3/h@7bar Outstanding flange water separator rates PURBERG® flange water separator have been developed for high-efficiency removal of bulk liquids and large impurities from compressed air systems. Inside the housing of flange water separator, there is an insert that creates a controlled rotation of the air. As a result of centrifugal action liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing of flange water separator prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate it is essential to install automatic or electronic condensate drain.   Technical data of flange water separator Flange water separator PUREBERG® FF142WW Operating pressure [bar] 0 - 16 Pipe Size [DN] 250 Flow Capacity [m3/h] 8520 Flow Capacity [Scfm] 5015 Dimenstions (AxBxCxD) [mm] 1330 x 800 x 360 x 480 Weight [kg] 207 Operating temperature [°C] 1,5 - 65 Material carbon steel Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 Downloads Flange water separator PUREBERG FFWW Installation And Operating Manual , PDF ( Size: 1 MB )

Flange compressed air filter PUREBERG® FF40(type)W1680Nm3/h@7bar Technical data of flange compressed air filter Flange compressed air filter PUREBERG® FF40(type)W Operating pressure [bar] 0 - 16 Pipe Size [DN] 80 Flow Capacity [m3/h] 1680 Flow Capacity [Scfm] 989 Dimensions (AxBxCxD) [mm] 1145 x 450 x 1640 x 219 Weight [kg] 71 Operating temperature [°C] 1,5 - 65     PUREBERG® flange filter housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons and other vapours from large compressed air systems. This series of filters is connected to the compressed air line with a flange. There are different filtration degrees. To meet the required compressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Downloads Flange Compressed air filter PUREBERG FFW Installations and Operating Manual, PDF ( Size: 1 MB )

Flange compressed air filter PUREBERG® FF53(type)W3150Nm3/h@7bar Technical data of flange compressed air filter Flange compressed air filter PUREBERG® FF53(type)W Operating pressure [bar] 0 - 16 Pipe Size [DN] 100 Flow Capacity [m3/h] 3150 Flow Capacity [Scfm] 1853 Dimensions (AxBxCxD) [mm] 1330 x 560 x 1780 x 324 Weight [kg] 110 Operating temperature [°C] 1,5 - 65     PUREBERG® flange filter housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons and other vapours from large compressed air systems. This series of filters is connected to the compressed air line with a flange. There are different filtration degrees. To meet the required compressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Downloads Flange Compressed air filter PUREBERG FFW Installations and Operating Manual, PDF ( Size: 1 MB )

Flange compressed air filter PUREBERG® FF78(type)W4700Nm3/h@7bar Technical data of flange compressed air filter Flange compressed air filter PUREBERG® FF78(type)W Operating pressure [bar] 0 - 16 Pipe Size [DN] 125 Flow Capacity [m3/h] 4700 Flow Capacity [Scfm] 2765 Dimensions (AxBxCxD) [mm] 1330 x 560 x 1780 x 324 Weight [kg] 115 Operating temperature [°C] 1,5 - 65     PUREBERG® flange filter housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons and other vapours from large compressed air systems. This series of filters is connected to the compressed air line with a flange. There are different filtration degrees. To meet the required compressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Downloads Flange Compressed air filter PUREBERG FFW Installations and Operating Manual, PDF ( Size: 1 MB )

Flange compressed air filter PUREBERG® FF105(type)W6300Nm3/h@7bar Technical data of flange compressed air filter Flange compressed air filter PUREBERG® FF105(type)W Operating pressure [bar] 0 - 16 Pipe Size [DN] 150 Flow Capacity [m3/h] 6300 Flow Capacity [Scfm] 3706 Dimensions (AxBxCxD) [mm] 1360 x 620 x 1780 x 368 Weight [kg] 154 Operating temperature [°C] 1,5 - 65     PUREBERG® flange filter housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons and other vapours from large compressed air systems. This series of filters is connected to the compressed air line with a flange. There are different filtration degrees. To meet the required compressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Downloads Flange Compressed air filter PUREBERG FFW Installations and Operating Manual, PDF ( Size: 1 MB )

Flange compressed air filter PUREBERG® FF157(type)W9400Nm3/h@7bar Technical data of flange compressed air filter Flange compressed air filter PUREBERG® FF157(type)W Operating pressure [bar] 0 - 16 Pipe Size [DN] 150 Flow Capacity [m3/h] 9400 Flow Capacity [Scfm] 5530 Dimensions (AxBxCxD) [mm] 1420 x 680 x 1810 x 405 Weight [kg] 195 Operating temperature [°C] 1,5 - 65     PUREBERG® flange filter housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons and other vapours from large compressed air systems. This series of filters is connected to the compressed air line with a flange. There are different filtration degrees. To meet the required compressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Downloads Flange Compressed air filter PUREBERG FFW Installations and Operating Manual, PDF ( Size: 1 MB )

High pressure compressed air filter PUREBERG® F03(Type)WHP Fine Filter, Superfine Filter, Activated carbon filter, 200 m3/h at 40 barHigh pressure compressed air filter DESCRIPTION High pressure compressed air filter PURBERG® filter housings are designed for the highly efficient removal of solid particles, water, oil aerosols, hydrocarbons and other vapors from compressed air systems. To achieve the required compressed air quality, a suitable filter element (F, S, A) must be installed in the filter housing.   Technical Data of high pressure compressed air filter High pressure compressed air filter High pressure compressed air filter PUREBERG® F03(Type)WHP Operating pressure [bar] 0 - 420 Pipe Size [inch] 1/4 Flow rate [m3/h] at 40 bar 200 Flow rate [Scfm] at 40 bar 117 Dimensions (AxBxCxD) [mm] 182 x 98 x 104 x 30 Material Stainless steel 1.4404 Weight [kg] 7,9 Operating temperature [°C] 1,5 - 65     F Fine Filter S Superfine Filter A Activated carbon W Water separator Quality class - solids (ISO8573-1) 2 1 1 _ Residual oil content (mg/m3) <0.1 <0.01 <0.005 _ Quality class - oil (ISO8573-1) 2 1 1 _ Quality class - water (ISO8573-1) _ _ _ 8 Pressure drop - new element (mbar) 50 80 60 40 Change filter cartridge at pressure drop (mbar) 350 350 6 months No Need  Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 40 80 120 200 420 Correction factors  1 2 2.4 2.4 2.4   Downloads High pressure compressed air filter PUREBERG FWHP Installations and Operating manual, PDF ( Size: 400 KB)

High pressure compressed air filter PUREBERG® F05(Type)WHP Fine Filter, Superfine Filter, Activated carbon filter, 350 m3/h at 40 bar High pressure compressed air filter DESCRIPTION High pressure compressed air filter PURBERG® filter housings are designed for the highly efficient removal of solid particles, water, oil aerosols, hydrocarbons and other vapors from compressed air systems. To achieve the required compressed air quality, a suitable filter element (F, S, A) must be installed in the filter housing.   Technical Data of high pressure compressed air filter High pressure compressed air filter High pressure compressed air filter PUREBERG® F05(Type)WHP Operating pressure [bar] 0 - 420 Pipe Size [inch] 3/8 Flow rate [m3/h] at 40 bar 350 Flow rate [Scfm] at 40 bar 206 Dimensions (AxBxCxD) [mm] 182 x 98 x 104 x 30 Material Stainless steel 1.4404 Weight [kg] 7,9 Operating temperature [°C] 1,5 - 65         F Fine Filter S Superfine Filter A Activated carbon W Water separator Quality class - solids (ISO8573-1) 2 1 1 _ Residual oil content (mg/m3) <0.1 <0.01 <0.005 _ Quality class - oil (ISO8573-1) 2 1 1 _ Quality class - water (ISO8573-1) _ _ _ 8 Pressure drop - new element (mbar) 50 80 60 40 Change filter cartridge at pressure drop (mbar) 350 350 6 months No Need  Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 40 80 120 200 420 Correction factors  1 2 2.4 2.4 2.4   Downloads High pressure compressed air filter PUREBERG FWHP Installations and Operating manual, PDF ( Size: 400 KB)

High pressure compressed air filter PUREBERG® F07(Type)WHP Fine Filter, Superfine Filter, Activated carbon filter, 650 m3/h at 40 barHigh pressure compressed air filter DESCRIPTION High pressure compressed air filter PURBERG® filter housings are designed for the highly efficient removal of solid particles, water, oil aerosols, hydrocarbons and other vapors from compressed air systems. To achieve the required compressed air quality, a suitable filter element (F, S, A) must be installed in the filter housing.   Technical Data of high pressure compressed air filter High pressure compressed air filter High pressure compressed air filter PUREBERG® F07(Type)WHP Operating pressure [bar] 0 - 420 Pipe Size [inch] 1/2 Flow rate [m3/h] at 40 bar 650 Flow rate [Scfm] at 40 bar 382 Dimensions (AxBxCxD) [mm] 230 x 118 x 129 x 36 Material Stainless steel 1.4404 Weight [kg] 15,7 Operating temperature [°C] 1,5 - 65         F Fine Filter S Superfine Filter A Activated carbon W Water separator Quality class - solids (ISO8573-1) 2 1 1 _ Residual oil content (mg/m3) <0.1 <0.01 <0.005 _ Quality class - oil (ISO8573-1) 2 1 1 _ Quality class - water (ISO8573-1) _ _ _ 8 Pressure drop - new element (mbar) 50 80 60 40 Change filter cartridge at pressure drop (mbar) 350 350 6 months No Need  Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 40 80 120 200 420 Correction factors  1 2 2.4 2.4 2.4   Downloads High pressure compressed air filter PUREBERG FWHP Installations and Operating manual, PDF ( Size: 400 KB)

High pressure compressed air filter PUREBERG® F10(Type)WHP Fine Filter, Superfine Filter, Activated carbon filter, 970 m3/h at 40 bar   High pressure compressed air filter DESCRIPTION High pressure compressed air filter PURBERG® filter housings are designed for the highly efficient removal of solid particles, water, oil aerosols, hydrocarbons and other vapors from compressed air systems. To achieve the required compressed air quality, a suitable filter element (F, S, A) must be installed in the filter housing.   Technical Data of high pressure compressed air filter High pressure compressed air filter High pressure compressed air filter PUREBERG® F10(Type)WHP Operating pressure [bar] 0 - 420 Pipe Size [inch] 3/4 Flow rate [m3/h] at 40 bar 970 Flow rate [Scfm] at 40 bar 575 Dimensions (AxBxCxD) [mm] 254 x 118 x 129 x 36 Material Stainless steel 1.4404 Weight [kg] 16,6 Operating temperature [°C] 1,5 - 65         F Fine Filter S Superfine Filter A Activated carbon W Water separator Quality class - solids (ISO8573-1) 2 1 1 _ Residual oil content (mg/m3) <0.1 <0.01 <0.005 _ Quality class - oil (ISO8573-1) 2 1 1 _ Quality class - water (ISO8573-1) _ _ _ 8 Pressure drop - new element (mbar) 50 80 60 40 Change filter cartridge at pressure drop (mbar) 350 350 6 months No Need  Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 40 80 120 200 420 Correction factors  1 2 2.4 2.4 2.4   Downloads High pressure compressed air filter PUREBERG FWHP Installations and Operating manual, PDF ( Size: 400 KB)

High pressure compressed air filter PUREBERG® F18(Type)WHP Fine Filter, Superfine Filter, Activated carbon filter, 1300 m3/h at 40 bar   High pressure compressed air filter DESCRIPTION High pressure compressed air filter PURBERG® filter housings are designed for the highly efficient removal of solid particles, water, oil aerosols, hydrocarbons and other vapors from compressed air systems. To achieve the required compressed air quality, a suitable filter element (F, S, A) must be installed in the filter housing.   Technical Data of high pressure compressed air filter High pressure filter High pressure compressed air filter PUREBERG® F18(Type)WHP Operating pressure [bar] 0 - 420 Pipe Size [inch] 1 Flow rate [m3/h] at 40 bar 1300 Flow rate [Scfm] at 40 bar 810 Dimensions (AxBxCxD) [mm] 276 x 145 x 158 x 46 Material Stainless steel 1.4404 Weight [kg] 27,3 Operating temperature [°C] 1,5 - 65         F Fine Filter S Superfine Filter A Activated carbon W Water separator Quality class - solids (ISO8573-1) 2 1 1 _ Residual oil content (mg/m3) <0.1 <0.01 <0.005 _ Quality class - oil (ISO8573-1) 2 1 1 _ Quality class - water (ISO8573-1) _ _ _ 8 Pressure drop - new element (mbar) 50 80 60 40 Change filter cartridge at pressure drop (mbar) 350 350 6 months No Need  Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 40 80 120 200 420 Correction factors  1 2 2.4 2.4 2.4   Downloads High pressure compressed air filter PUREBERG FWHP Installations and Operating manual, PDF ( Size: 400 KB)

High pressure compressed air filter PUREBERG® F30(Type)WHP Fine Filter, Superfine Filter, Activated carbon filter, 1900 m3/h at 40 bar   High pressure compressed air filter DESCRIPTION High pressure compressed air filter PURBERG® filter housings are designed for the highly efficient removal of solid particles, water, oil aerosols, hydrocarbons and other vapors from compressed air systems. To achieve the required compressed air quality, a suitable filter element (F, S, A) must be installed in the filter housing.   Technical Data of high pressure compressed air filter High pressure filter High pressure compressed air filter PUREBERG® F30(Type)WHP Operating pressure [bar] 0 - 420 Pipe Size [inch] 1 1/4 Flow rate [m3/h] at 40 bar 1900 Flow rate [Scfm] at 40 bar 1115 Dimensions (AxBxCxD) [mm] 328 x 145 x 158 x 46 Material  Stainless steel 1.4404 Weight [kg] 29,6 Operating temperature [°C] 1,5 - 65     F Fine Filter S Superfine Filter A Activated carbon W Water separator Quality class - solids (ISO8573-1) 2 1 1 _ Residual oil content (mg/m3) <0.1 <0.01 <0.005 _ Quality class - oil (ISO8573-1) 2 1 1 _ Quality class - water (ISO8573-1) _ _ _ 8 Pressure drop - new element (mbar) 50 80 60 40 Change filter cartridge at pressure drop (mbar) 350 350 6 months No Need  Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 40 80 120 200 420 Correction factors  1 2 2.4 2.4 2.4   Downloads High pressure compressed air filter PUREBERG FWHP Installations and Operating manual, PDF ( Size: 400 KB)

High pressure compressed air filter PUREBERG® F47(Type)WHP Fine Filter, Superfine Filter, Activated carbon filter, 2470 m3/h at 40 bar   High pressure compressed air filter DESCRIPTION High pressure compressed air filter PURBERG® filter housings are designed for the highly efficient removal of solid particles, water, oil aerosols, hydrocarbons and other vapors from compressed air systems. To achieve the required compressed air quality, a suitable filter element (F, S, A) must be installed in the filter housing.   Technical Data of high pressure compressed air filter High pressure filter High pressure compressed air filter PUREBERG® F47(Type)WHP Operating pressure [bar] 0 - 420 Pipe Size [inch] 1 1/2 Flow rate [m3/h] at 40 bar 2470 Flow rate [Scfm] at 40 bar 1455 Dimensions (AxBxCxD) [mm] 385 x 195 x 216 x 65 Material  Stainless steel 1.4404 Weight [kg] 67,8 Operating temperature [°C] 1,5 - 65     F Fine Filter S Superfine Filter A Activated carbon W Water separator Quality class - solids (ISO8573-1) 2 1 1 _ Residual oil content (mg/m3) <0.1 <0.01 <0.005 _ Quality class - oil (ISO8573-1) 2 1 1 _ Quality class - water (ISO8573-1) _ _ _ 8 Pressure drop - new element (mbar) 50 80 60 40 Change filter cartridge at pressure drop (mbar) 350 350 6 months No Need  Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 40 80 120 200 420 Correction factors  1 2 2.4 2.4 2.4   Downloads High pressure compressed air filter PUREBERG FWHP Installations and Operating manual, PDF ( Size: 400 KB)

Sterile filter PUREBERG® F 02 SPFWTechnical Data of Sterile filter Sterile filter PUREBERG® F 02 SPFW Operating pressure [bar] 14 Pipe Size [inch] 1/2 Flow rate [m3/h] 150 Flow rate [Scfm] 88 Dimensions (AxBxCxE) [mm] 258 x 121 x 76.1 x 1.8" Material Stainless steel 1.4404 Weight [kg] 2.1 Element filter EF 02 SPF   Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 2 3 4 5 6 7 8 9 10 Correction factors  0.38 0.5 0.63 0.75 0.88 1 1.13 1.25 1.38  

Sterile filter PUREBERG® F 03 SPFWTechnical Data of Sterile filter Sterile filter PUREBERG® F 03 SPFW Operating pressure [bar] 14 Pipe Size [inch] 3/4 Flow rate [m3/h] 225 Flow rate [Scfm] 132 Dimensions (AxBxCxE) [mm] 282 x 121 x 76.1 x 1.8" Material Stainless steel 1.4404 Weight [kg] 2.3 Element filter EF 03 SPF   Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 2 3 4 5 6 7 8 9 10 Correction factors  0.38 0.5 0.63 0.75 0.88 1 1.13 1.25 1.38  

Sterile filter PUREBERG® F 05 SPFWTechnical Data of Sterile filter Sterile filter PUREBERG® F 05 SPFW Operating pressure [bar] 14 Pipe Size [inch] 1 Flow rate [m3/h] 315 Flow rate [Scfm] 185 Dimensions (AxBxCxE) [mm] 299 x 136 x 88.9 x 1.8" Material Stainless steel 1.4404 Weight [kg] 3.1 Element filter EF 05 SPF   Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 2 3 4 5 6 7 8 9 10 Correction factors  0.38 0.5 0.63 0.75 0.88 1 1.13 1.25 1.38  

Sterile filter PUREBERG® F 07 SPFWTechnical Data of Sterile filter Sterile filter PUREBERG® F 07 SPFW Operating pressure [bar] 14 Pipe Size [inch] 1 1/4 Flow rate [m3/h] 420 Flow rate [Scfm] 247 Dimensions (AxBxCxE) [mm] 368 x 155 x 88.9 x 1.8" Material Stainless steel 1.4404 Weight [kg] 3.4 Element filter EF 07 SPF   Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 2 3 4 5 6 7 8 9 10 Correction factors  0.38 0.5 0.63 0.75 0.88 1 1.13 1.25 1.38  

Sterile filter PUREBERG® F 10 SPFWTechnical Data of Sterile filter Sterile filter PUREBERG® F 10 SPFW Operating pressure [bar] 14 Pipe Size [inch] 1 1/2 Flow rate [m3/h] 600 Flow rate [Scfm] 353 Dimensions (AxBxCxE) [mm] 395 x 180 x 114.3 x 1.4" Material Stainless steel 1.4404 Weight [kg] 4.7 Element filter EF 10 SPF   Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 2 3 4 5 6 7 8 9 10 Correction factors  0.38 0.5 0.63 0.75 0.88 1 1.13 1.25 1.38  

Sterile filter PUREBERG® F 15 SPFWTechnical Data of Sterile filter Sterile filter PUREBERG® F 15 SPFW Operating pressure [bar] 14 Pipe Size [inch] 2 Flow rate [m3/h] 900 Flow rate [Scfm] 530 Dimensions (AxBxCxE) [mm] 464 x 180 x 114.3 x 1.4" Material Stainless steel 1.4404 Weight [kg] 5.3 Element filter EF 15 SPF   Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 2 3 4 5 6 7 8 9 10 Correction factors  0.38 0.5 0.63 0.75 0.88 1 1.13 1.25 1.38  

Magnetic manometer BERG - MDM40 Magnetic manometer is designed to indicate pressure drop across the filter element in compressed air system. For any other technical gas please contact us or your local distributor. It detects when the filter cartridge is clogged and should be replaced. Magnetic manometer is typically installed on the head of the filter housing. Magnetic manometer can be used in variety of applications. For applications not listed please contact us or your local distributor.   Applications of Magnetic manometer • automotive • electronics • food & beverage • chemical • petrochemical • plastics • paint • general industrial application   Technical Data of Magnetic manometer Magnetic Manometer BERG   Operating pressure [bar] 20 Operating temperature [°C] 1,5 - 65 mass [kg] 0.15 measuring range [bar] 0.9 Dimensions (AxBxCxDxExF) [mm] 54 x 54 x 65 x 23,5 x M5 Downloads Magnetic manometer Installation And Operating Manual Magnetic manometer MDM40 , PDF ( Size: 256 KB )

Condensate drains BERGDRAIN 06 Automatic Condensate drains BERGDRAIN 06 is designed for fully automatic discharging of condensate or any other non-aggressive fluid from compressed air system. AOK16B is easy to install inside the filter housing. AOK16B can be used in variety of applications. For applications not listed please contact producer or your local distributor. Technical Data of BERGDRAIN 06 Condensate drains BERGDRAIN 06 Operating temperature range  1,5-65℃ (35-149 ℉) Operating pressure range 0-16 bar (0-232 psi) Mass [kg] 0,04 kg Connection G 1/2" Outlet connection ∅8 Dimensions H×D [mm] 90 × ∅38,5 mm Medium Condensate (air, water, oil)

Manual condensate drain BERG Ball valve, brass  A service indicator informs punctually about the upcoming maintenance and/or exchange for the service unit. All parts which are subject to wear or are pressurised can be reached with one manual movement. Neither electrical installations nor the installation of seals and individual parts are necessary. The installation concept is also particularly user-friendly and time-saving: The device only has to be connected once electrically.   Applications Manual condensate drain Connection kit: valve for inlet with thread G 1/2 for BEKOMAT 10,12, 12 CO, 20, 21, 21 PRO also manual drain valve for CLEARPOINT     Technical Data of Manual condensate drain Manual condensate drain BERG   Pipe size G 1/2 for pressure up to [bar] 16

Condensate drains BERGDRAIN 05 Manual condensate drain BERGDRAIN 05 is designed for the discharging of condensate or any other non-aggressive fluid from compressed air system. In order to prevent condensate from re-entering in the airstream, we recommend controlling the condensate level in filter bowl, which requires an automatic drain trap. MCD is easy to install on the filter housing.   Technische Daten of BERGDRAIN 05 Condensate drains BERGDRAIN 05 Operating temperature range 1,5-65℃ (35-149 ℉) Operating pressure range 0-20 bar (290 psi) Mass [kg] 0,06 kg Connection G 1/2" Dimensions AxBxCxDxE 38,2 mm x 29,2 mm x 9 mm x G 1/2" x 24,0 mm Medium Condensate (air, water, oil) Material Brass