PUREBERG®, Filter & Water Separator

Compressed air filter (PUREBERG®)

Achieve maximum purity
Before the compressed air can be used, it must be freed from aerosols, oil, and particles. Because the pollution caused by the ambient air and the compressor operation can damage your production systems and/or contaminate your end product. BERG kompressoren GmbH offers a wide selection of compressed air filter. just a few of the many advantages of our compressed air filter PUREBERG®: BERG compressed air filter technology guarantees low operating costs, a long service life, excellent process reliability, and reliable filtration.
PUREBERG® F02(Type)W Compressed air filter, 96 Nm3/h at 7 bar
Compressed air filter PUREBERG® F02(Type)W ,96 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter CONDENSATE Max. operating pressure 20 bar  Volume flow rate 96 to 2760 Nm3/h  Connections 1/2" bis 3"  Operating temp. range +2 bis 65° Technical Data of Compressed air filter  Compressed air filter PUREBERG® F02(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 1/2 Flow Capacity [m3/h] 96 Flow Capacity [Scfm] 56 Dimensions (AxBxCxD) [mm] 256 x 88 x 20 x 80 Volume [l] 0,6 Weight [kg] 0,8 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)     G General Filter F Fine Filter S Superfine Filter A ​Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Net €200.00 €238.00*
PUREBERG® F03(Type)W Compressed air filter, 150 Nm3/h at 7 bar
Compressed air filter PUREBERG® F03(Type)W ,150 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter The perfect choice Virtually abrasion-free Integrated particle removal Easily adapted checking system Simple cartridge replacement Flow optimized housing Comprehensive line Technical Data of Compressed air filter  Compressed air filter PUREBERG® F03(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 1/2 Flow Capacity [m3/h] 150 Flow Capacity [Scfm] 88 Dimenstions (AxBxCxD) [mm] 278 x 106 x 25 x 100 Volume [l] 1,2 Weight [kg] 1,3 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)       G General Filter F Fine Filter S Superfine Filter A Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Net €250.00 €297.50*
PUREBERG® F04(Type)W Compressed air filter, 216 Nm3/h at 7 bar
Compressed air filter PUREBERG® F04(Type)W ,216 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter Innovative features mean outstanding performance without compromise  Compressed air filter PURBERG® housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons, odour vapours from com­pressed air systems. To meet the required com­pressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Housing prevents condensate from being picked up and "car­ried over" into the airstream. The BERG compressed air filter technolo­gy guarantees low operating costs, long service life, outstanding process reliability, and safe filtration.    Technical Data of Compressed air filter  Compressed air filter PUREBERG® F04(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 3/4 Flow Capacity [m3/h] 216 Flow Capacity [Scfm] 127 Dimensions (AxBxCxD) [mm] 278 x 106 x 25 x 100 Volume [l] 1,2 Weight [kg] 1,3 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)       G General Filter F Fine Filter S Superfine Filter A Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Net €260.00 €309.40*
PUREBERG® F05(Type)W Compressed air filter, 282 Nm3/h at 7 bar
Compressed air filter PUREBERG® F05(Type)W ,282 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter Innovative features mean outstanding performance without compromise  Compressed air filter PURBERG® housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons, odour vapours from com­pressed air systems. To meet the required com­pressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Housing prevents condensate from being picked up and "car­ried over" into the airstream. The BERG compressed air filter technolo­gy guarantees low operating costs, long service life, outstanding process reliability, and safe filtration.    Technical Data of Compressed air filter  Compressed air filter PUREBERG® F05(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 1 Flow Capacity [m3/h] 282 Flow Capacity [Scfm] 166 Dimenstions (AxBxCxD) [mm] 252 x 125 x 32 x 120 Volume [l] 1,57 Weight [kg] 2,1 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)     G General Filter F Fine Filter S Superfine Filter A Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Net €350.00 €416.50*
PUREBERG® F06(Type)W Compressed air filter, 360 Nm3/h at 7 bar
Compressed air filter PUREBERG® F06(Type)W ,360 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter Innovative features mean outstanding performance without compromise  Compressed air filter PURBERG® housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons, odour vapours from com­pressed air systems. To meet the required com­pressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Housing prevents condensate from being picked up and "car­ried over" into the airstream. The BERG compressed air filter technolo­gy guarantees low operating costs, long service life, outstanding process reliability, and safe filtration.    Technical Data of Compressed air filter  Compressed air filter PUREBERG® F06(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 1 Flow Capacity [m3/h] 360 Flow Capacity [Scfm] 212 Dimenstions (AxBxCxD) [mm] 352 x 125 x 32 x 140 Volume [l] 2,2 Weight [kg] 2,4 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)       G General Filter F Fine Filter S Superfine Filter A ​Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Net €440.00 €523.60*
PUREBERG® F09(Type)W Compressed air filter, 510 Nm3/h at 7 bar
Compressed air filter PUREBERG® F09(Type)W ,510 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter Innovative features mean outstanding performance without compromise  Compressed air filter PURBERG® housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons, odour vapours from com­pressed air systems. To meet the required com­pressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Housing prevents condensate from being picked up and "car­ried over" into the airstream. The BERG compressed air filter technolo­gy guarantees low operating costs, long service life, outstanding process reliability, and safe filtration.    Technical Data of Compressed air filter  Compressed air filter PUREBERG® F09(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 1 1/2 Flow Capacity [m3/h] 510 Flow Capacity [Scfm] 300 Dimenstions (AxBxCxD) [mm] 450 x 125 x 32 x 160 Volume [l] 3,0 Weight [kg] 3,2 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)       G General Filter F Fine Filter S Superfine Filter A Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Net €540.00 €642.60*
PUREBERG® F13(Type)W Compressed air filter, 750 Nm3/h at 7 bar
Compressed air filter PUREBERG® F13(Type)W ,750 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter Innovative features mean outstanding performance without compromise  Compressed air filter PURBERG® housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons, odour vapours from com­pressed air systems. To meet the required com­pressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Housing prevents condensate from being picked up and "car­ried over" into the airstream. The BERG compressed air filter technolo­gy guarantees low operating costs, long service life, outstanding process reliability, and safe filtration.    Technical Data of Compressed air filter  Compressed air filter PUREBERG® F13(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 1 1/2 Flow Capacity [m3/h] 750 Flow Capacity [Scfm] 441 Dimenstions (AxBxCxD) [mm] 450 x 125 x 32 x 160 Volume [l] 3,0 Weight [kg] 3,2 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)       G General Filter F Fine Filter S Superfine Filter A Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Net €630.00 €749.70*
PUREBERG® F15(Type)W Compressed air filter, 888 Nm3/h at 7 bar
Compressed air filter PUREBERG® F15(Type)W ,888 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter Innovative features mean outstanding performance without compromise  Compressed air filter PURBERG® housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons, odour vapours from com­pressed air systems. To meet the required com­pressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Housing prevents condensate from being picked up and "car­ried over" into the airstream. The BERG compressed air filter technolo­gy guarantees low operating costs, long service life, outstanding process reliability, and safe filtration.    Technical Data of Compressed air filter  Compressed air filter PUREBERG® F15(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 2 Flow Capacity [m3/h] 888 Flow Capacity [Scfm] 522 Dimensions (AxBxCxD) [mm] 605 x 160 x 43 x 180 Volume [l] 6,0 Weight [kg] 5,1 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)       G General Filter F Fine Filter S Superfine Filter A Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Net €1,030.00 €1,225.70*
PUREBERG® F20(Type)W Compressed air filter, 1176 Nm3/h at 7 bar
Compressed air filter PUREBERG® F20(Type)W ,1176 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter Innovative features mean outstanding performance without compromise  Compressed air filter PURBERG® housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons, odour vapours from com­pressed air systems. To meet the required com­pressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Housing prevents condensate from being picked up and "car­ried over" into the airstream. The BERG compressed air filter technolo­gy guarantees low operating costs, long service life, outstanding process reliability, and safe filtration.    Technical Data of Compressed air filter  Compressed air filter PUREBERG® F20(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 2 Flow Capacity [m3/h] 1176 Flow Capacity [Scfm] 692 Dimensions (AxBxCxD) [mm] 605 x 160 x 43 x 180 Volume [l] 6,0 Weight [kg] 5,1 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)       G General Filter F Fine Filter S Superfine Filter A Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Net €1,230.00 €1,463.70*
PUREBERG® F24(Type)W Compressed air filter, 1440 Nm3/h at 7 bar
Compressed air filter PUREBERG® F24(Type)W ,1440 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter Innovative features mean outstanding performance without compromise  Compressed air filter PURBERG® housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons, odour vapours from com­pressed air systems. To meet the required com­pressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Housing prevents condensate from being picked up and "car­ried over" into the airstream. The BERG compressed air filter technolo­gy guarantees low operating costs, long service life, outstanding process reliability, and safe filtration.    Technical Data of Compressed air filter  Compressed air filter PUREBERG® F24(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 2 1/2 Flow Capacity [m3/h] 1440 Flow Capacity [Scfm] 847 Dimenstions (AxBxCxD) [mm] 685 x 160 x 43 x 200 Volume [l] 6,5 Weight [kg] 6,3 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)     G General Filter F Fine Filter S Superfine Filter A Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Net €1,620.00 €1,927.80*
PUREBERG® F33(Type)W Compressed air filter, 1968 Nm3/h at 7 bar
Compressed air filter PUREBERG® F33(Type)W ,1968 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter Innovative features mean outstanding performance without compromise  Compressed air filter PURBERG® housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons, odour vapours from com­pressed air systems. To meet the required com­pressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Housing prevents condensate from being picked up and "car­ried over" into the airstream. The BERG compressed air filter technolo­gy guarantees low operating costs, long service life, outstanding process reliability, and safe filtration.    Technical Data of Compressed air filter  Compressed air filter PUREBERG® F33(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 3 Flow Capacity [m3/h] 1968 Flow Capacity [Scfm] 1158 Dimensions (AxBxCxD) [mm] 800 x 240 x 60 x 300 Volume [l] 19,0 Weight [kg] 12,9 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)     G General Filter F Fine Filter S Superfine Filter A Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Net €1,870.00 €2,225.30*
PUREBERG® F46(Type)W Compressed air filter, 2760 Nm3/h at 7 bar
Compressed air filter PUREBERG® F46(Type)W ,2760 Nm3/h at 7 bar General filter, Fine filter, Superfine filter, Activated carbon filter Innovative features mean outstanding performance without compromise  Compressed air filter PURBERG® housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons, odour vapours from com­pressed air systems. To meet the required com­pressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Housing prevents condensate from being picked up and "car­ried over" into the airstream. The BERG compressed air filter technolo­gy guarantees low operating costs, long service life, outstanding process reliability, and safe filtration.    Technical Data of Compressed air filter  Compressed air filter PUREBERG® F46(Type)W Operating pressure [bar] 0 - 20 Pipe Size [inch] 3 Flow Capacity [m3/h] 2760 Flow Capacity [Scfm] 1624 Dimensions (AxBxCxD) [mm] 800 x 240 x 60 x 300 Volume [l] 19,0 Weight [kg] 12,9 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Anodized (optional) Outside protection Powder paint coated (Epoxy-polyester base)     G General Filter F Fine Filter S Superfine Filter A Activated carbon Quality class - particle (ISO8573-1) 3 2 1 1 Residual oil content (mg/m3) <1 <0.1 <0.01 <0.005 Quality class - Oil (ISO8573-1) 3 2 1 0 Pressure drop - new element (mbar) 20 50 60 60 change filter cartridge at pressure drop (mbar) 350 350 350 6 months Filter media Acrylic fibers Borosilicate microfibers Activate carbon   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Compressed air filter Installation And Operating Manual , PDF ( Size: 1 MB )

Net €2,360.00 €2,808.40*
PUREBERG® FF40(Type)W Flange Compressed air filter
Flange compressed air filter PUREBERG® FF40(type)W1680Nm3/h@7bar Technical data of flange compressed air filter Flange compressed air filter PUREBERG® FF40(type)W Operating pressure [bar] 0 - 16 Pipe Size [DN] 80 Flow Capacity [m3/h] 1680 Flow Capacity [Scfm] 989 Dimensions (AxBxCxD) [mm] 1145 x 450 x 1640 x 219 Weight [kg] 71 Operating temperature [°C] 1,5 - 65     PUREBERG® flange filter housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons and other vapours from large compressed air systems. This series of filters is connected to the compressed air line with a flange. There are different filtration degrees. To meet the required compressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Downloads Flange Compressed air filter PUREBERG FFW Installations and Operating Manual, PDF ( Size: 1 MB )

Net €3,960.00 €4,712.40*
PUREBERG® FF53(Type)W Flange Compressed air filter
Flange compressed air filter PUREBERG® FF53(type)W3150Nm3/h@7bar Technical data of flange compressed air filter Flange compressed air filter PUREBERG® FF53(type)W Operating pressure [bar] 0 - 16 Pipe Size [DN] 100 Flow Capacity [m3/h] 3150 Flow Capacity [Scfm] 1853 Dimensions (AxBxCxD) [mm] 1330 x 560 x 1780 x 324 Weight [kg] 110 Operating temperature [°C] 1,5 - 65     PUREBERG® flange filter housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons and other vapours from large compressed air systems. This series of filters is connected to the compressed air line with a flange. There are different filtration degrees. To meet the required compressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Downloads Flange Compressed air filter PUREBERG FFW Installations and Operating Manual, PDF ( Size: 1 MB )

Net €5,010.00 €5,961.90*
PUREBERG® FF78(Type)W Flange Compressed air filter
Flange compressed air filter PUREBERG® FF78(type)W4700Nm3/h@7bar Technical data of flange compressed air filter Flange compressed air filter PUREBERG® FF78(type)W Operating pressure [bar] 0 - 16 Pipe Size [DN] 125 Flow Capacity [m3/h] 4700 Flow Capacity [Scfm] 2765 Dimensions (AxBxCxD) [mm] 1330 x 560 x 1780 x 324 Weight [kg] 115 Operating temperature [°C] 1,5 - 65     PUREBERG® flange filter housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons and other vapours from large compressed air systems. This series of filters is connected to the compressed air line with a flange. There are different filtration degrees. To meet the required compressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Downloads Flange Compressed air filter PUREBERG FFW Installations and Operating Manual, PDF ( Size: 1 MB )

Net €6,880.00 €8,187.20*
PUREBERG® FF105(Type)W Flange Compressed air filter
Flange compressed air filter PUREBERG® FF105(type)W6300Nm3/h@7bar Technical data of flange compressed air filter Flange compressed air filter PUREBERG® FF105(type)W Operating pressure [bar] 0 - 16 Pipe Size [DN] 150 Flow Capacity [m3/h] 6300 Flow Capacity [Scfm] 3706 Dimensions (AxBxCxD) [mm] 1360 x 620 x 1780 x 368 Weight [kg] 154 Operating temperature [°C] 1,5 - 65     PUREBERG® flange filter housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons and other vapours from large compressed air systems. This series of filters is connected to the compressed air line with a flange. There are different filtration degrees. To meet the required compressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Downloads Flange Compressed air filter PUREBERG FFW Installations and Operating Manual, PDF ( Size: 1 MB )

Net €7,620.00 €9,067.80*
PUREBERG® FF157(Type)W Flange Compressed air filter
Flange compressed air filter PUREBERG® FF157(type)W9400Nm3/h@7bar Technical data of flange compressed air filter Flange compressed air filter PUREBERG® FF157(type)W Operating pressure [bar] 0 - 16 Pipe Size [DN] 150 Flow Capacity [m3/h] 9400 Flow Capacity [Scfm] 5530 Dimensions (AxBxCxD) [mm] 1420 x 680 x 1810 x 405 Weight [kg] 195 Operating temperature [°C] 1,5 - 65     PUREBERG® flange filter housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons and other vapours from large compressed air systems. This series of filters is connected to the compressed air line with a flange. There are different filtration degrees. To meet the required compressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Downloads Flange Compressed air filter PUREBERG FFW Installations and Operating Manual, PDF ( Size: 1 MB )

Net €10,210.00 €12,149.90*
PUREBERG® F01WW Water separator, 72m3/h@7bar
Water separator PUREBERG® F01WW, 72m3/h@7bar Water separator with comprehensive rate and outstanding efficiency PURBERG® water separator have been developed for high-efficiency removal of bulk liquids from compressed air and vacuum systems up to 20 bar. Inside the housing, there is an insert with vanes that creates a controlled rotation of the air. As a result of centrifugal action liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the filter housing prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate from the F-WW water separator it is essential to install automatic or electronic condensate drain.   Function of water separator Compressed air enters the water separator through the curved inlet and then specially shaped guide vanes ensure a special rotational movement at high speed and force the compressed air into a circular movement. After the resulting centrifugal forces direct the water droplets to the outside of the filter housing, the droplets flow down into the collection chamber due to gravity. Shielding the collecting area Calms the air flow in this area in order to effectively avoid whirling up and entrainment of already separated liquids. In water separator a specially designed riser tube prevents particle transfer to the upward rotating flow of the compressed air, which has largely been cleaned of condensate. The innovative water separator rectifier leads the compressed air to the outlet and reduces flow losses to a minimum.   Technical data of water separator Water separator PUREBERG® F01WW Operating pressure [bar] 0 - 20 Pipe Size [inch] 3/8 Flow Capacity [m3/h] 72 Flow Capacity [Scfm] 42 Dimensions (AxBxCxD) [mm] 187 x 88 x 20 x 80 Volume [l] 0,47 Weight [kg] 0,7 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Stainless Steel 1.4301 Outside protection Anodized (optional) Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Water separator Installation And Operating Manual , PDF ( Size: 490 KB )

Net €340.00 €404.60*
PUREBERG® F02WW Water separator, 96m3/h@7bar
Water separator PUREBERG® F02WW, 96m3/h@7bar Water separator with comprehensive rate and outstanding efficiency PURBERG® water separator have been developed for high-efficiency removal of bulk liquids from compressed air and vacuum systems up to 20 bar. Inside the housing, there is an insert with vanes that creates a controlled rotation of the air. As a result of centrifugal action liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the filter housing prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate from the F-WW water separator it is essential to install automatic or electronic condensate drain.   Function of water separator Compressed air enters the water separator through the curved inlet and then specially shaped guide vanes ensure a special rotational movement at high speed and force the compressed air into a circular movement. After the resulting centrifugal forces direct the water droplets to the outside of the filter housing, the droplets flow down into the collection chamber due to gravity. Shielding the collecting area Calms the air flow in this area in order to effectively avoid whirling up and entrainment of already separated liquids. In water separator a specially designed riser tube prevents particle transfer to the upward rotating flow of the compressed air, which has largely been cleaned of condensate. The innovative water separator rectifier leads the compressed air to the outlet and reduces flow losses to a minimum.   Technical data of water separator Water separator PUREBERG® F02WW Operating pressure [bar] 0 - 20 Pipe Size [inch] 1/2 Flow Capacity [m3/h] 96 Flow Capacity [Scfm] 56 Dimensions (AxBxCxD) [mm] 256 x 88 x 20 x 80 Volume [l] 0,6 Weight [kg] 0,8 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Stainless Steel 1.4301 Outside protection Anodized (optional) Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Water separator Installation And Operating Manual , PDF ( Size: 490 KB )

Net €370.00 €440.30*
PUREBERG® F03WW Water separator, 150m3/h@7bar
Water separator PUREBERG® F03WW, 150m3/h@7bar Water separator with comprehensive rate and outstanding efficiency PURBERG® water separator have been developed for high-efficiency removal of bulk liquids from compressed air and vacuum systems up to 20 bar. Inside the housing, there is an insert with vanes that creates a controlled rotation of the air. As a result of centrifugal action liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the filter housing prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate from the F-WW water separator it is essential to install automatic or electronic condensate drain.   Function of water separator Compressed air enters the water separator through the curved inlet and then specially shaped guide vanes ensure a special rotational movement at high speed and force the compressed air into a circular movement. After the resulting centrifugal forces direct the water droplets to the outside of the filter housing, the droplets flow down into the collection chamber due to gravity. Shielding the collecting area Calms the air flow in this area in order to effectively avoid whirling up and entrainment of already separated liquids. In water separator a specially designed riser tube prevents particle transfer to the upward rotating flow of the compressed air, which has largely been cleaned of condensate. The innovative water separator rectifier leads the compressed air to the outlet and reduces flow losses to a minimum.   Technical data of water separator Water separator PUREBERG® F03WW Operating pressure [bar] 0 - 20 Pipe Size [inch] 1/2 Flow Capacity [m3/h] 150 Flow Capacity [Scfm] 88 Dimensions (AxBxCxD) [mm] 278 x 106 x 25 x 100 Volume [l] 1,2 Weight [kg] 1,3 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Stainless Steel 1.4301 Outside protection Anodized (optional) Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Water separator Installation And Operating Manual , PDF ( Size: 490 KB )

Net €380.00 €452.20*
PUREBERG® F04WW Water separator, 216m3/h@7bar
Water separator PUREBERG® F04WW, 216m3/h@7bar Water separator with comprehensive rate and outstanding efficiency PURBERG® water separator have been developed for high-efficiency removal of bulk liquids from compressed air and vacuum systems up to 20 bar. Inside the housing, there is an insert with vanes that creates a controlled rotation of the air. As a result of centrifugal action liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the filter housing prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate from the F-WW water separator it is essential to install automatic or electronic condensate drain.   Function of water separator Compressed air enters the water separator through the curved inlet and then specially shaped guide vanes ensure a special rotational movement at high speed and force the compressed air into a circular movement. After the resulting centrifugal forces direct the water droplets to the outside of the filter housing, the droplets flow down into the collection chamber due to gravity. Shielding the collecting area Calms the air flow in this area in order to effectively avoid whirling up and entrainment of already separated liquids. In water separator a specially designed riser tube prevents particle transfer to the upward rotating flow of the compressed air, which has largely been cleaned of condensate. The innovative water separator rectifier leads the compressed air to the outlet and reduces flow losses to a minimum.   Technical data of water separator Water separator PUREBERG® F04WW Operating pressure [bar] 0 - 20 Pipe Size [inch] 3/4 Flow Capacity [m3/h] 216 Flow Capacity [Scfm] 127 Dimensions (AxBxCxD) [mm] 278 x 106 x 25 x 100 Volume [l] 1,2 Weight [kg] 1,3 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Stainless Steel 1.4301 Outside protection Anodized (optional) Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63  Downloads Water separator Installation And Operating Manual , PDF ( Size: 490 KB )

Net €400.00 €476.00*
PUREBERG® F05WW Water separator, 282m3/h@7bar
Water separator PUREBERG® F05WW, 282m3/h@7bar Water separator with comprehensive rate and outstanding efficiency PURBERG® water separator have been developed for high-efficiency removal of bulk liquids from compressed air and vacuum systems up to 20 bar. Inside the housing, there is an insert with vanes that creates a controlled rotation of the air. As a result of centrifugal action liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the filter housing prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate from the F-WW water separator it is essential to install automatic or electronic condensate drain.   Function of water separator Compressed air enters the water separator through the curved inlet and then specially shaped guide vanes ensure a special rotational movement at high speed and force the compressed air into a circular movement. After the resulting centrifugal forces direct the water droplets to the outside of the filter housing, the droplets flow down into the collection chamber due to gravity. Shielding the collecting area Calms the air flow in this area in order to effectively avoid whirling up and entrainment of already separated liquids. In water separator a specially designed riser tube prevents particle transfer to the upward rotating flow of the compressed air, which has largely been cleaned of condensate. The innovative water separator rectifier leads the compressed air to the outlet and reduces flow losses to a minimum.   Technical data of water separator Water separator PUREBERG® F05WW Operating pressure [bar] 0 - 20 Pipe Size [inch] 1 Flow Capacity [m3/h] 282 Flow Capacity [Scfm] 166 Dimensions (AxBxCxD) [mm] 252 x 125 x 32 x 120 Volume [l] 1,57 Weight [kg] 2,1 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Stainless Steel 1.4301 Outside protection Anodized (optional) Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63  Downloads Water separator Installation And Operating Manual , PDF ( Size: 490 KB )

Net €470.00 €559.30*
PUREBERG® F09WW Water separator, 510m3/h@7bar
Water separator PUREBERG® F09WW, 510m3/h@7bar Water separator with comprehensive rate and outstanding efficiency PURBERG® water separator have been developed for high-efficiency removal of bulk liquids from compressed air and vacuum systems up to 20 bar. Inside the housing, there is an insert with vanes that creates a controlled rotation of the air. As a result of centrifugal action liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the filter housing prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate from the F-WW water separator it is essential to install automatic or electronic condensate drain.   Function of water separator Compressed air enters the water separator through the curved inlet and then specially shaped guide vanes ensure a special rotational movement at high speed and force the compressed air into a circular movement. After the resulting centrifugal forces direct the water droplets to the outside of the filter housing, the droplets flow down into the collection chamber due to gravity. Shielding the collecting area Calms the air flow in this area in order to effectively avoid whirling up and entrainment of already separated liquids. In water separator a specially designed riser tube prevents particle transfer to the upward rotating flow of the compressed air, which has largely been cleaned of condensate. The innovative water separator rectifier leads the compressed air to the outlet and reduces flow losses to a minimum.   Technical data of water separator Water separator PUREBERG® F09WW Operating pressure [bar] 0 - 20 Pipe Size [inch] 1 1/2 Flow Capacity [m3/h] 510 Flow Capacity [Scfm] 300 Dimensions (AxBxCxD) [mm] 450 x 125 x 32 x 160 Volume [l] 3,0 Weight [kg] 3,2 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Stainless Steel 1.4301 Outside protection Anodized (optional) Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Water separator Installation And Operating Manual , PDF ( Size: 490 KB )

Net €590.00 €702.10*
PUREBERG® F15WW Water separator, 888m3/h@7bar
Water separator PUREBERG® F15WW, 888m3/h@7bar Water separator with comprehensive rate and outstanding efficiency PURBERG® water separator have been developed for high-efficiency removal of bulk liquids from compressed air and vacuum systems up to 20 bar. Inside the housing, there is an insert with vanes that creates a controlled rotation of the air. As a result of centrifugal action liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the filter housing prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate from the F-WW water separator it is essential to install automatic or electronic condensate drain.   Function of water separator Compressed air enters the water separator through the curved inlet and then specially shaped guide vanes ensure a special rotational movement at high speed and force the compressed air into a circular movement. After the resulting centrifugal forces direct the water droplets to the outside of the filter housing, the droplets flow down into the collection chamber due to gravity. Shielding the collecting area Calms the air flow in this area in order to effectively avoid whirling up and entrainment of already separated liquids. In water separator a specially designed riser tube prevents particle transfer to the upward rotating flow of the compressed air, which has largely been cleaned of condensate. The innovative water separator rectifier leads the compressed air to the outlet and reduces flow losses to a minimum.   Technical data of water separator Water separator PUREBERG® F15WW Operating pressure [bar] 0 - 20 Pipe Size [inch] 2 Flow Capacity [m3/h] 888 Flow Capacity [Scfm] 522 Dimensions (AxBxCxD) [mm] 605 x 160 x 43 x 180 Volume [l] 6,0 Weight [kg] 5,1 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Stainless Steel 1.4301 Outside protection Anodized (optional) Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Water separator Installation And Operating Manual , PDF ( Size: 490 KB )

Net €920.00 €1,094.80*
PUREBERG® F24WW Water separator, 1440m3/h@7bar
Water separator PUREBERG® F24WW, 1440m3/h@7bar Water separator with comprehensive rate and outstanding efficiency PURBERG® water separator have been developed for high-efficiency removal of bulk liquids from compressed air and vacuum systems up to 20 bar. Inside the housing, there is an insert with vanes that creates a controlled rotation of the air. As a result of centrifugal action liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the filter housing prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate from the F-WW water separator it is essential to install automatic or electronic condensate drain.   Function of water separator Compressed air enters the water separator through the curved inlet and then specially shaped guide vanes ensure a special rotational movement at high speed and force the compressed air into a circular movement. After the resulting centrifugal forces direct the water droplets to the outside of the filter housing, the droplets flow down into the collection chamber due to gravity. Shielding the collecting area Calms the air flow in this area in order to effectively avoid whirling up and entrainment of already separated liquids. In water separator a specially designed riser tube prevents particle transfer to the upward rotating flow of the compressed air, which has largely been cleaned of condensate. The innovative water separator rectifier leads the compressed air to the outlet and reduces flow losses to a minimum.   Technical data of water separator Water separator PUREBERG® F24WW Operating pressure [bar] 0 - 20 Pipe Size [inch] 2 1/2 Flow Capacity [m3/h] 1440 Flow Capacity [Scfm] 847 Dimenstions (AxBxCxD) [mm] 685 x 160 x 43 x 200 Volume [l] 6,5 Weight [kg] 6,3 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Stainless Steel 1.4301 Outside protection Anodized (optional) Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Water separator Installation And Operating Manual , PDF ( Size: 490 KB )

Net €1,440.00 €1,713.60*
PUREBERG® F46WW Water separator, 2760m3/h@7bar
Water separator PUREBERG® F46WW, 2760m3/h@7bar Water separator with comprehensive rate and outstanding efficiency PURBERG® water separator have been developed for high-efficiency removal of bulk liquids from compressed air and vacuum systems up to 20 bar. Inside the housing, there is an insert with vanes that creates a controlled rotation of the air. As a result of centrifugal action liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the filter housing prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate from the F-WW water separator it is essential to install automatic or electronic condensate drain.   Function of water separator Compressed air enters the water separator through the curved inlet and then specially shaped guide vanes ensure a special rotational movement at high speed and force the compressed air into a circular movement. After the resulting centrifugal forces direct the water droplets to the outside of the filter housing, the droplets flow down into the collection chamber due to gravity. Shielding the collecting area Calms the air flow in this area in order to effectively avoid whirling up and entrainment of already separated liquids. In water separator a specially designed riser tube prevents particle transfer to the upward rotating flow of the compressed air, which has largely been cleaned of condensate. The innovative water separator rectifier leads the compressed air to the outlet and reduces flow losses to a minimum.   Technical data of water separator Water separator PUREBERG® F46WW Operating pressure [bar] 0 - 20 Pipe Size [inch] 3 Flow Capacity [m3/h] 2760 Flow Capacity [Scfm] 1624 Dimensions (AxBxCxD) [mm] 800 x 240 x 60 x 300 Volume [l] 19,0 Weight [kg] 12,9 Operating temperature [°C] 1,5 - 65 Housing material Aluminium Cover ABS Sealing NBR Corrosion protection Stainless Steel 1.4301 Outside protection Anodized (optional) Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 Downloads Water separator Installation And Operating Manual , PDF ( Size: 490 KB )

Net €1,990.00 €2,368.10*
PUREBERG® FF29WW Flange water separator
Flange water separator PUREBERG® FF29WW 1760Nm3/h@7bar Outstanding flange water separator rates PURBERG® flange water separator have been developed for high-efficiency removal of bulk liquids and large impurities from compressed air systems. Inside the housing of flange water separator, there is an insert that creates a controlled rotation of the air. As a result of centrifugal action liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing flange water separator prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate it is essential to install automatic or electronic condensate drain.   Technical data of flange water separator Flange water separator PUREBERG® FF29WW Operating pressure [bar] 0 - 16 Pipe Size [DN] 80 Flow Capacity [m3/h] 1760 Flow Capacity [Scfm] 1024 Dimenstions (AxBxCxD) [mm] 720 x 400 x 165 x 219 Weight [kg] 33 Operating temperature [°C] 1,5 - 65 Material carbon steel Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 Downloads Flange water separator PUREBERG FFWW Installation And Operating Manual , PDF ( Size: 1 MB )

Net €2,290.00 €2,725.10*
PUREBERG® FF37WW Flange water separator
Flange water separator PUREBERG® FF37WW 2200Nm3/h@7bar Outstanding flange water separator rates PURBERG® flange water separator have been developed for high-efficiency removal of bulk liquids and large impurities from compressed air systems. Inside the housing of flange water separator, there is an insert that creates a controlled rotation of the air. As a result of centrifugal action liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing of flange water separator prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate it is essential to install automatic or electronic condensate drain.   Technical data of flange water separator Flange water separator PUREBERG® FF37WW Operating pressure [bar] 0 - 16 Pipe Size [DN] 100 Flow Capacity [m3/h] 2200 Flow Capacity [Scfm] 1307 Dimenstions (AxBxCxD) [mm] 890 x 460 x 236 x 244 Weight [kg] 45 Operating temperature [°C] 1,5 - 65 Material carbon steel Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 Downloads Flange water separator PUREBERG FFWW Installation And Operating Manual , PDF ( Size: 1 MB )

Net €2,790.00 €3,320.10*
PUREBERG® FF66WW Flange water separator
Flange water separator PUREBERG® FF66WW 3940Nm3/h@7bar Outstanding flange water separator rates PURBERG® flange water separator have been developed for high-efficiency removal of bulk liquids and large impurities from compressed air systems. Inside the housing of flange water separator, there is an insert that creates a controlled rotation of the air. As a result of centrifugal action liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing of flange water separator prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate it is essential to install automatic or electronic condensate drain.   Technical data of flange water separator Flange water separator PUREBERG® FF66WW Operating pressure [bar] 0 - 16 Pipe Size [DN] 125 Flow Capacity [m3/h] 3940 Flow Capacity [Scfm] 2331 Dimensions (AxBxCxD) [mm] 980 x 550 x 250 x 273 Weight [kg] 58 Operating temperature [°C] 1,5 - 65 Material carbon steel Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 Downloads Flange water separator PUREBERG FFWW Installation And Operating Manual , PDF ( Size: 1 MB )

Net €3,160.00 €3,760.40*
PUREBERG® FF 88 WW Flange water separator
Flange water separator PUREBERG® FF 88 WW 5300Nm3/h@7bar Outstanding flange water separator rates PURBERG® flange water separator have been developed for high-efficiency removal of bulk liquids and large impurities from compressed air systems. Inside the housing of flange water separator, there is an insert that creates a controlled rotation of the air. As a result of centrifugal action liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing of flange water separator prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate it is essential to install automatic or electronic condensate drain.   Technical data of flange water separator Flange water separator PUREBERG® FF88WW Operating pressure [bar] 0 - 16 Pipe Size [DN] 150 Flow Capacity [m3/h] 5300 Flow Capacity [Scfm] 3108 Dimenstions (AxBxCxD) [mm] 1040 x 570 x 250 x 300 Weight [kg] 81 Operating temperature [°C] 1,5 - 65 Material carbon steel Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 Downloads Flange water separator PUREBERG FFWW Installation And Operating Manual , PDF ( Size: 1 MB )  

Net €3,630.00 €4,319.70*
PUREBERG® FF97WW Flange water separator
Flange water separator PUREBERG® FF97WW 5820Nm3/h@7bar Outstanding flange water separator rates PURBERG® flange water separator have been developed for high-efficiency removal of bulk liquids and large impurities from compressed air systems. Inside the housing of flange water separator, there is an insert that creates a controlled rotation of the air. As a result of centrifugal action liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing of flange water separator prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate it is essential to install automatic or electronic condensate drain.   Technical data of flange water separator Flange water separator PUREBERG® FF97WW Operating pressure [bar] 0 - 16 Pipe Size [DN] 200 Flow Capacity [m3/h] 5820 Flow Capacity [Scfm] 3426 Dimenstions (AxBxCxD) [mm] 1110 x 690 x 256 x 350 Weight [kg] 107 Operating temperature [°C] 1,5 - 65 Material carbon steel Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 Downloads Flange water separator PUREBERG FFWW Installation And Operating Manual , PDF ( Size: 1 MB )

Net €4,220.00 €5,021.80*
PUREBERG® FF142WW Flange water separator
Flange water separator PUREBERG® FF142WW 8520Nm3/h@7bar Outstanding flange water separator rates PURBERG® flange water separator have been developed for high-efficiency removal of bulk liquids and large impurities from compressed air systems. Inside the housing of flange water separator, there is an insert that creates a controlled rotation of the air. As a result of centrifugal action liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing of flange water separator prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate it is essential to install automatic or electronic condensate drain.   Technical data of flange water separator Flange water separator PUREBERG® FF142WW Operating pressure [bar] 0 - 16 Pipe Size [DN] 250 Flow Capacity [m3/h] 8520 Flow Capacity [Scfm] 5015 Dimenstions (AxBxCxD) [mm] 1330 x 800 x 360 x 480 Weight [kg] 207 Operating temperature [°C] 1,5 - 65 Material carbon steel Included BEKOMAT 20   Operating pressure - Correction factors  Operating pressure (bar) 4 5 6 7 8 9 10 11 12 13 14 15 16 Correction factors  0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 Downloads Flange water separator PUREBERG FFWW Installation And Operating Manual , PDF ( Size: 1 MB )

Net €6,960.00 €8,282.40*
PUREBERG® F03(Type)WHP High pressure compressed air filter
High pressure compressed air filter PUREBERG® F03(Type)WHP Fine Filter, Superfine Filter, Activated carbon filter, 200 m3/h at 40 barHigh pressure compressed air filter DESCRIPTION High pressure compressed air filter PURBERG® filter housings are designed for the highly efficient removal of solid particles, water, oil aerosols, hydrocarbons and other vapors from compressed air systems. To achieve the required compressed air quality, a suitable filter element (F, S, A) must be installed in the filter housing.   Technical Data of high pressure compressed air filter High pressure compressed air filter High pressure compressed air filter PUREBERG® F03(Type)WHP Operating pressure [bar] 0 - 420 Pipe Size [inch] 1/4 Flow rate [m3/h] at 40 bar 200 Flow rate [Scfm] at 40 bar 117 Dimensions (AxBxCxD) [mm] 182 x 98 x 104 x 30 Material Stainless steel 1.4404 Weight [kg] 7,9 Operating temperature [°C] 1,5 - 65     F Fine Filter S Superfine Filter A Activated carbon W Water separator Quality class - solids (ISO8573-1) 2 1 1 _ Residual oil content (mg/m3) <0.1 <0.01 <0.005 _ Quality class - oil (ISO8573-1) 2 1 1 _ Quality class - water (ISO8573-1) _ _ _ 8 Pressure drop - new element (mbar) 50 80 60 40 Change filter cartridge at pressure drop (mbar) 350 350 6 months No Need  Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 40 80 120 200 420 Correction factors  1 2 2.4 2.4 2.4   Downloads High pressure compressed air filter PUREBERG FWHP Installations and Operating manual, PDF ( Size: 400 KB)

Net €830.00 €987.70*
PUREBERG® F05(Type)WHP High pressure compressed air filter
High pressure compressed air filter PUREBERG® F05(Type)WHP Fine Filter, Superfine Filter, Activated carbon filter, 350 m3/h at 40 bar High pressure compressed air filter DESCRIPTION High pressure compressed air filter PURBERG® filter housings are designed for the highly efficient removal of solid particles, water, oil aerosols, hydrocarbons and other vapors from compressed air systems. To achieve the required compressed air quality, a suitable filter element (F, S, A) must be installed in the filter housing.   Technical Data of high pressure compressed air filter High pressure compressed air filter High pressure compressed air filter PUREBERG® F05(Type)WHP Operating pressure [bar] 0 - 420 Pipe Size [inch] 3/8 Flow rate [m3/h] at 40 bar 350 Flow rate [Scfm] at 40 bar 206 Dimensions (AxBxCxD) [mm] 182 x 98 x 104 x 30 Material Stainless steel 1.4404 Weight [kg] 7,9 Operating temperature [°C] 1,5 - 65         F Fine Filter S Superfine Filter A Activated carbon W Water separator Quality class - solids (ISO8573-1) 2 1 1 _ Residual oil content (mg/m3) <0.1 <0.01 <0.005 _ Quality class - oil (ISO8573-1) 2 1 1 _ Quality class - water (ISO8573-1) _ _ _ 8 Pressure drop - new element (mbar) 50 80 60 40 Change filter cartridge at pressure drop (mbar) 350 350 6 months No Need  Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 40 80 120 200 420 Correction factors  1 2 2.4 2.4 2.4   Downloads High pressure compressed air filter PUREBERG FWHP Installations and Operating manual, PDF ( Size: 400 KB)

Net €830.00 €987.70*
PUREBERG® F07(Type)WHP High pressure compressed air filter
High pressure compressed air filter PUREBERG® F07(Type)WHP Fine Filter, Superfine Filter, Activated carbon filter, 650 m3/h at 40 barHigh pressure compressed air filter DESCRIPTION High pressure compressed air filter PURBERG® filter housings are designed for the highly efficient removal of solid particles, water, oil aerosols, hydrocarbons and other vapors from compressed air systems. To achieve the required compressed air quality, a suitable filter element (F, S, A) must be installed in the filter housing.   Technical Data of high pressure compressed air filter High pressure compressed air filter High pressure compressed air filter PUREBERG® F07(Type)WHP Operating pressure [bar] 0 - 420 Pipe Size [inch] 1/2 Flow rate [m3/h] at 40 bar 650 Flow rate [Scfm] at 40 bar 382 Dimensions (AxBxCxD) [mm] 230 x 118 x 129 x 36 Material Stainless steel 1.4404 Weight [kg] 15,7 Operating temperature [°C] 1,5 - 65         F Fine Filter S Superfine Filter A Activated carbon W Water separator Quality class - solids (ISO8573-1) 2 1 1 _ Residual oil content (mg/m3) <0.1 <0.01 <0.005 _ Quality class - oil (ISO8573-1) 2 1 1 _ Quality class - water (ISO8573-1) _ _ _ 8 Pressure drop - new element (mbar) 50 80 60 40 Change filter cartridge at pressure drop (mbar) 350 350 6 months No Need  Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 40 80 120 200 420 Correction factors  1 2 2.4 2.4 2.4   Downloads High pressure compressed air filter PUREBERG FWHP Installations and Operating manual, PDF ( Size: 400 KB)

Net €1,120.00 €1,332.80*
PUREBERG® F10(Type)WHP High pressure compressed air filter
High pressure compressed air filter PUREBERG® F10(Type)WHP Fine Filter, Superfine Filter, Activated carbon filter, 970 m3/h at 40 bar   High pressure compressed air filter DESCRIPTION High pressure compressed air filter PURBERG® filter housings are designed for the highly efficient removal of solid particles, water, oil aerosols, hydrocarbons and other vapors from compressed air systems. To achieve the required compressed air quality, a suitable filter element (F, S, A) must be installed in the filter housing.   Technical Data of high pressure compressed air filter High pressure compressed air filter High pressure compressed air filter PUREBERG® F10(Type)WHP Operating pressure [bar] 0 - 420 Pipe Size [inch] 3/4 Flow rate [m3/h] at 40 bar 970 Flow rate [Scfm] at 40 bar 575 Dimensions (AxBxCxD) [mm] 254 x 118 x 129 x 36 Material Stainless steel 1.4404 Weight [kg] 16,6 Operating temperature [°C] 1,5 - 65         F Fine Filter S Superfine Filter A Activated carbon W Water separator Quality class - solids (ISO8573-1) 2 1 1 _ Residual oil content (mg/m3) <0.1 <0.01 <0.005 _ Quality class - oil (ISO8573-1) 2 1 1 _ Quality class - water (ISO8573-1) _ _ _ 8 Pressure drop - new element (mbar) 50 80 60 40 Change filter cartridge at pressure drop (mbar) 350 350 6 months No Need  Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 40 80 120 200 420 Correction factors  1 2 2.4 2.4 2.4   Downloads High pressure compressed air filter PUREBERG FWHP Installations and Operating manual, PDF ( Size: 400 KB)

Net €1,440.00 €1,713.60*
PUREBERG® F18(Type)WHP High pressure compressed air filter
High pressure compressed air filter PUREBERG® F18(Type)WHP Fine Filter, Superfine Filter, Activated carbon filter, 1300 m3/h at 40 bar   High pressure compressed air filter DESCRIPTION High pressure compressed air filter PURBERG® filter housings are designed for the highly efficient removal of solid particles, water, oil aerosols, hydrocarbons and other vapors from compressed air systems. To achieve the required compressed air quality, a suitable filter element (F, S, A) must be installed in the filter housing.   Technical Data of high pressure compressed air filter High pressure filter High pressure compressed air filter PUREBERG® F18(Type)WHP Operating pressure [bar] 0 - 420 Pipe Size [inch] 1 Flow rate [m3/h] at 40 bar 1300 Flow rate [Scfm] at 40 bar 810 Dimensions (AxBxCxD) [mm] 276 x 145 x 158 x 46 Material Stainless steel 1.4404 Weight [kg] 27,3 Operating temperature [°C] 1,5 - 65         F Fine Filter S Superfine Filter A Activated carbon W Water separator Quality class - solids (ISO8573-1) 2 1 1 _ Residual oil content (mg/m3) <0.1 <0.01 <0.005 _ Quality class - oil (ISO8573-1) 2 1 1 _ Quality class - water (ISO8573-1) _ _ _ 8 Pressure drop - new element (mbar) 50 80 60 40 Change filter cartridge at pressure drop (mbar) 350 350 6 months No Need  Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 40 80 120 200 420 Correction factors  1 2 2.4 2.4 2.4   Downloads High pressure compressed air filter PUREBERG FWHP Installations and Operating manual, PDF ( Size: 400 KB)

Net €1,990.00 €2,368.10*
PUREBERG® F30(Type)WHP High pressure compressed air filter
High pressure compressed air filter PUREBERG® F30(Type)WHP Fine Filter, Superfine Filter, Activated carbon filter, 1900 m3/h at 40 bar   High pressure compressed air filter DESCRIPTION High pressure compressed air filter PURBERG® filter housings are designed for the highly efficient removal of solid particles, water, oil aerosols, hydrocarbons and other vapors from compressed air systems. To achieve the required compressed air quality, a suitable filter element (F, S, A) must be installed in the filter housing.   Technical Data of high pressure compressed air filter High pressure filter High pressure compressed air filter PUREBERG® F30(Type)WHP Operating pressure [bar] 0 - 420 Pipe Size [inch] 1 1/4 Flow rate [m3/h] at 40 bar 1900 Flow rate [Scfm] at 40 bar 1115 Dimensions (AxBxCxD) [mm] 328 x 145 x 158 x 46 Material  Stainless steel 1.4404 Weight [kg] 29,6 Operating temperature [°C] 1,5 - 65     F Fine Filter S Superfine Filter A Activated carbon W Water separator Quality class - solids (ISO8573-1) 2 1 1 _ Residual oil content (mg/m3) <0.1 <0.01 <0.005 _ Quality class - oil (ISO8573-1) 2 1 1 _ Quality class - water (ISO8573-1) _ _ _ 8 Pressure drop - new element (mbar) 50 80 60 40 Change filter cartridge at pressure drop (mbar) 350 350 6 months No Need  Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 40 80 120 200 420 Correction factors  1 2 2.4 2.4 2.4   Downloads High pressure compressed air filter PUREBERG FWHP Installations and Operating manual, PDF ( Size: 400 KB)

Net €2,230.00 €2,653.70*
PUREBERG® F47(Type)WHP High pressure compressed air filter
High pressure compressed air filter PUREBERG® F47(Type)WHP Fine Filter, Superfine Filter, Activated carbon filter, 2470 m3/h at 40 bar   High pressure compressed air filter DESCRIPTION High pressure compressed air filter PURBERG® filter housings are designed for the highly efficient removal of solid particles, water, oil aerosols, hydrocarbons and other vapors from compressed air systems. To achieve the required compressed air quality, a suitable filter element (F, S, A) must be installed in the filter housing.   Technical Data of high pressure compressed air filter High pressure filter High pressure compressed air filter PUREBERG® F47(Type)WHP Operating pressure [bar] 0 - 420 Pipe Size [inch] 1 1/2 Flow rate [m3/h] at 40 bar 2470 Flow rate [Scfm] at 40 bar 1455 Dimensions (AxBxCxD) [mm] 385 x 195 x 216 x 65 Material  Stainless steel 1.4404 Weight [kg] 67,8 Operating temperature [°C] 1,5 - 65     F Fine Filter S Superfine Filter A Activated carbon W Water separator Quality class - solids (ISO8573-1) 2 1 1 _ Residual oil content (mg/m3) <0.1 <0.01 <0.005 _ Quality class - oil (ISO8573-1) 2 1 1 _ Quality class - water (ISO8573-1) _ _ _ 8 Pressure drop - new element (mbar) 50 80 60 40 Change filter cartridge at pressure drop (mbar) 350 350 6 months No Need  Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 40 80 120 200 420 Correction factors  1 2 2.4 2.4 2.4   Downloads High pressure compressed air filter PUREBERG FWHP Installations and Operating manual, PDF ( Size: 400 KB)

Net €3,170.00 €3,772.30*
PUREBERG® F 02 SPFW Sterile filter
Sterile filter PUREBERG® F 02 SPFWTechnical Data of Sterile filter Sterile filter PUREBERG® F 02 SPFW Operating pressure [bar] 14 Pipe Size [inch] 1/2 Flow rate [m3/h] 150 Flow rate [Scfm] 88 Dimensions (AxBxCxE) [mm] 258 x 121 x 76.1 x 1.8" Material Stainless steel 1.4404 Weight [kg] 2.1 Element filter EF 02 SPF   Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 2 3 4 5 6 7 8 9 10 Correction factors  0.38 0.5 0.63 0.75 0.88 1 1.13 1.25 1.38  

From Net €150.00 €178.50*
PUREBERG® F 03 SPFW Sterile filter
Sterile filter PUREBERG® F 03 SPFWTechnical Data of Sterile filter Sterile filter PUREBERG® F 03 SPFW Operating pressure [bar] 14 Pipe Size [inch] 3/4 Flow rate [m3/h] 225 Flow rate [Scfm] 132 Dimensions (AxBxCxE) [mm] 282 x 121 x 76.1 x 1.8" Material Stainless steel 1.4404 Weight [kg] 2.3 Element filter EF 03 SPF   Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 2 3 4 5 6 7 8 9 10 Correction factors  0.38 0.5 0.63 0.75 0.88 1 1.13 1.25 1.38  

From Net €190.00 €226.10*
PUREBERG® F 05 SPFW Sterile filter
Sterile filter PUREBERG® F 05 SPFWTechnical Data of Sterile filter Sterile filter PUREBERG® F 05 SPFW Operating pressure [bar] 14 Pipe Size [inch] 1 Flow rate [m3/h] 315 Flow rate [Scfm] 185 Dimensions (AxBxCxE) [mm] 299 x 136 x 88.9 x 1.8" Material Stainless steel 1.4404 Weight [kg] 3.1 Element filter EF 05 SPF   Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 2 3 4 5 6 7 8 9 10 Correction factors  0.38 0.5 0.63 0.75 0.88 1 1.13 1.25 1.38  

From Net €225.00 €267.75*
PUREBERG® F 07 SPFW Sterile filter
Sterile filter PUREBERG® F 07 SPFWTechnical Data of Sterile filter Sterile filter PUREBERG® F 07 SPFW Operating pressure [bar] 14 Pipe Size [inch] 1 1/4 Flow rate [m3/h] 420 Flow rate [Scfm] 247 Dimensions (AxBxCxE) [mm] 368 x 155 x 88.9 x 1.8" Material Stainless steel 1.4404 Weight [kg] 3.4 Element filter EF 07 SPF   Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 2 3 4 5 6 7 8 9 10 Correction factors  0.38 0.5 0.63 0.75 0.88 1 1.13 1.25 1.38  

From Net €270.00 €321.30*
PUREBERG® F 10 SPFW Sterile filter
Sterile filter PUREBERG® F 10 SPFWTechnical Data of Sterile filter Sterile filter PUREBERG® F 10 SPFW Operating pressure [bar] 14 Pipe Size [inch] 1 1/2 Flow rate [m3/h] 600 Flow rate [Scfm] 353 Dimensions (AxBxCxE) [mm] 395 x 180 x 114.3 x 1.4" Material Stainless steel 1.4404 Weight [kg] 4.7 Element filter EF 10 SPF   Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 2 3 4 5 6 7 8 9 10 Correction factors  0.38 0.5 0.63 0.75 0.88 1 1.13 1.25 1.38  

From Net €335.00 €398.65*
PUREBERG® F 15 SPFW Sterile filter
Sterile filter PUREBERG® F 15 SPFWTechnical Data of Sterile filter Sterile filter PUREBERG® F 15 SPFW Operating pressure [bar] 14 Pipe Size [inch] 2 Flow rate [m3/h] 900 Flow rate [Scfm] 530 Dimensions (AxBxCxE) [mm] 464 x 180 x 114.3 x 1.4" Material Stainless steel 1.4404 Weight [kg] 5.3 Element filter EF 15 SPF   Correction Factors Operating pressure - Correction factors  Operating pressure (bar) 2 3 4 5 6 7 8 9 10 Correction factors  0.38 0.5 0.63 0.75 0.88 1 1.13 1.25 1.38  

From Net €410.00 €487.90*
Element Filter For F02(typ)W, EF02(typ)
Element Filter For F02(typ)W = EF02(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Net €55.00 €65.45*
Element Filter For F03(typ)W, EF03(typ)
Element Filter For F03(typ)W= EF03(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Net €75.00 €89.25*
Element Filter For F04(typ)W, EF04(typ)
Element Filter For F04(typ)W = EF04(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Net €80.00 €95.20*
Element Filter For F05(typ)W, EF05(typ)
Element Filter For F05(typ)W = EF05(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Net €95.00 €113.05*
Element Filter For F06(typ)W, EF06(typ)
Element Filter For F06(typ)W = EF06(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Net €130.00 €154.70*
Element Filter For F07(typ)W, EF07(typ)
Element Filter For F07(typ)W = EF07(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Net €150.00 €178.50*
Element Filter For F09(typ)W, EF09(typ)
Element Filter For F09(typ)W = EF09(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Net €160.00 €190.40*
Element Filter For F13(typ)W, EF13(typ)
Element Filter For F13(typ)W = EF13(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Net €205.00 €243.95*
Element Filter For F15(typ)W, EF15(typ)
Element Filter For F15(typ)W = EF15(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Net €285.00 €339.15*
Element Filter For F20(typ)W, EF20(typ)
Element Filter For F20(typ)W = EF20(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Net €325.00 €386.75*
Element Filter For F24(typ)W, EF24(typ)
Element Filter For F24(typ)W = EF24(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Net €370.00 €440.30*
Element Filter For F33(typ)W, EF33(typ)
Element Filter For F33(typ)W = EF33(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Net €450.00 €535.50*
Element Filter For F46(typ)W, EF46(typ)
Element Filter For F46(typ)W = EF46(typ) Special item for BERG Alternative Element Filter BERG kompressoren GmbH offers a wide selection of filter elements for a variety of air and gas filtration applications. You can select all range of berg compressed air filter element in BERG filter category. Element Filter according to ISO 8573-1: 2010 Quality class Solid particles, max. Number of particles per m3 Pressure dew point (℃) Oil (including oil vapor) (mg / m3) 0.1 μm - 0.5 μm  0.5 μm - 1.0 μm 1.0 μm - 5.0 μm 0 As determined by the device driver or supplier, stricter requirements than Class 1 1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -70 ≤ 0.01 2 ≤ 400,000 ≤ 6,000 ≤ 100 ≤ -40 ≤ 0.1 3 - ≤ 90,000 ≤ 1,000 ≤ -20 ≤ 1 4 - - ≤ 10,000 ≤ +3 ≤ 5 5 - - ≤ 100,000 ≤ +7 > 5  6 - - - ≤ +10 -

Net €515.00 €612.85*
Magnetic manometer BERG
Magnetic manometer BERG - MDM40 Magnetic manometer is designed to indicate pressure drop across the filter element in compressed air system. For any other technical gas please contact us or your local distributor. It detects when the filter cartridge is clogged and should be replaced. Magnetic manometer is typically installed on the head of the filter housing. Magnetic manometer can be used in variety of applications. For applications not listed please contact us or your local distributor.   Applications of Magnetic manometer • automotive • electronics • food & beverage • chemical • petrochemical • plastics • paint • general industrial application   Technical Data of Magnetic manometer Magnetic Manometer BERG   Operating pressure [bar] 20 Operating temperature [°C] 1,5 - 65 mass [kg] 0.15 measuring range [bar] 0.9 Dimensions (AxBxCxDxExF) [mm] 54 x 54 x 65 x 23,5 x M5 Downloads Magnetic manometer Installation And Operating Manual Magnetic manometer MDM40 , PDF ( Size: 256 KB )

Net €45.00 €53.55*
Manual condensate drain BERG
Manual condensate drain BERG Ball valve, brass  A service indicator informs punctually about the upcoming maintenance and/or exchange for the service unit. All parts which are subject to wear or are pressurised can be reached with one manual movement. Neither electrical installations nor the installation of seals and individual parts are necessary. The installation concept is also particularly user-friendly and time-saving: The device only has to be connected once electrically.   Applications Manual condensate drain Connection kit: valve for inlet with thread G 1/2 for BEKOMAT 10,12, 12 CO, 20, 21, 21 PRO also manual drain valve for CLEARPOINT     Technical Data of Manual condensate drain Manual condensate drain BERG   Pipe size G 1/2 for pressure up to [bar] 16

Net €35.00 €41.65*
Condensate drains BERGDRAIN 06
Condensate drains BERGDRAIN 06 Automatic Condensate drains BERGDRAIN 06 is designed for fully automatic discharging of condensate or any other non-aggressive fluid from compressed air system. AOK16B is easy to install inside the filter housing. AOK16B can be used in variety of applications. For applications not listed please contact producer or your local distributor. Technical Data of BERGDRAIN 06 Condensate drains BERGDRAIN 06 Operating temperature range  1,5-65℃ (35-149 ℉) Operating pressure range 0-16 bar (0-232 psi) Mass [kg] 0,04 kg Connection G 1/2" Outlet connection ∅8 Dimensions H×D [mm] 90 × ∅38,5 mm Medium Condensate (air, water, oil)

Net €45.00 €53.55*
Condensate drains BERGDRAIN 05
Condensate drains BERGDRAIN 05 Manual condensate drain BERGDRAIN 05 is designed for the discharging of condensate or any other non-aggressive fluid from compressed air system. In order to prevent condensate from re-entering in the airstream, we recommend controlling the condensate level in filter bowl, which requires an automatic drain trap. MCD is easy to install on the filter housing.   Technische Daten of BERGDRAIN 05 Condensate drains BERGDRAIN 05 Operating temperature range 1,5-65℃ (35-149 ℉) Operating pressure range 0-20 bar (290 psi) Mass [kg] 0,06 kg Connection G 1/2" Dimensions AxBxCxDxE 38,2 mm x 29,2 mm x 9 mm x G 1/2" x 24,0 mm Medium Condensate (air, water, oil) Material Brass

Net €35.00 €41.65*

Technical Data of compressed air filter

Filter housing size Pipe size Max. oper, pressure Flow rate
At 7 bar(g), 20°C
Dimensions (mm) Weight G
General Filter
F
Fine Filter
S
Superfine Filter
A
Activated carbon Filter
inch bar Nm3/h scfm A B C D Kg        
F02(type)W 1/2 20 96 56 256 89 20 80 0.8 02 G 02 F 02 S 02 S
F03(type)W 1/2 20 150 88 278 106 25 100 1.3 03 G 03 F 03 S 03 S
F04(type)W 3/4 20 216 127 278 106 25 100 1.3 04 G 04 F 04 S 04 S
F05(type)W 1 20 282 166 252 125 32 120 2.1 05 G 05 F 05 S 05 S
F06(type)W 1 20 360 212 352 125 32 140 2.4 06 G 06 F 06 S 06 S
F09(type)W 11/2 20 510 300 450 125 32 160 3.2 09 G 09 F 09 S 09 S
F13(type)W 11/2 20 750 441 450 125 32 160 3.2 13 G 13 F 13 S 13 S
F15(type)W 2 20 888 522 605 160 43 180 5.1 15 G 15 F 15 S 15 S
F20(type)W 2 20 1176 692 605 160 43 180 5.1 20 G 20 F 20 S 20 S
F24(type)W 21/2 20 1440 847 685 160 43 200 6.3 24 G 24 F 24 S 24 S
F33(type)W 3 20 1968 1158 800 240 60 300 12.9 33 G 33 F 33 S 33 S
F46(type)W 3 20 2760 1624 800 240 60 300 12.9 46 G 46 F 46 S 46 S

Technical Data of BERG Water Separator

Filter housing size Pipe size Max. oper, pressure Flow rate At 7 bar(g), 20°C Dimensions (mm) Weight
inch bar Nm3/h scfm A B C Kg
F01WW 3/8 20 72 42 187 88 20 0.7
F02WW 1/2 20 96 56 256 88 20 0.8
F03WW 1/2 20 150 88 278 106 25 1.3
F04WW 3/4 20 216 127 278 106 25 1.3
F05WW 1 20 282 166 252 125 32 2.1
F09WW 1 1/2 20 510 300 450 125 32 3.2
F15WW 2 20 888 522 605 160 43 5.1
F24WW 2 1/2 20 1440 847 685 160 43 6.3
F46WW 3 20 2760 1624 800 240 60 12.9
 
 

Technical Data of Flange water separator

Filter housing size Pipe size Max. oper, pressure Flow rate
At 7 bar(g), 20°C
Temperature oper. Range Dimensions (mm) Weight
DN bar Nm3/h scfm °C °F A B C D Kg
FF29WW 80 16 1760 1024 1.5-65 35-149 720 400 165 219 33
FF37WW 100 16 2200 1307 1.5-65 35-149 890 460 236 244 45
FF66WW 125 16 3940 2331 1.5-65 35-149 980 550 250 273 58
FF88WW 150 16 5300 3108 1.5-65 35-149 1040 570 250 300 81
FF97WW 200 16 5820 3426 1.5-65 35-149 1110 690 256 350 107
FF142WW 250 16 8520 5015 1.5-65 35-149 1330 800 360 480 207

Technical Data of high pressure filter

Filter  housing size
 Pipe Size
Max. oper, Pressure FLow rate
At 40 bar(g)
Dimenstions (mm) F
Fine Filter
S
Super Fine Filter
A
ACtivated Carbon
Weight
inch bar Nm3/h scfm A       Kg
F03(type)WHP G 1/4" 100/420 200 117 182 x 98 x 104 x 30 03 FHP 03 SHP 03 AHP 7.9
F05(type)WHP G 3/8" 100/420 350 206 182 x 98 x 104 x 30 05 FHP 05 SHP 05 AHP 7.9
F07(type)WHP G 1/2" 100/420 650 382 230 x 118 x 129 x 36 07 FHP 07 SHP 07 AHP 15.7
F10(type)WHP G 3/4" 100/420 970 575 254 x 118 x 129 x 36 10 FHP 10 SHP 10 AHP 16.6
F18(type)WHP G 1" 100/420 1300 810 276 x 145 x 158 x 46 18 FHP 18 SHP 18 AHP 27.3
F30(type)WHP G 1 1/4" 100/420 1900 1115 328 x 145 x 158 x 46 30 FHP 30 SHP 30 AHP 29.6
F47(type)WHP G 1 1/2" 100/420 2470 1455 385 x 195 x 216 x 65 47 FHP 47 SHP 47 AHP 67.8
 

Technical Data of Sterile filter 

Sterile filter
Housing size
Pipe Size Max.oper, Pressure           Flow rate At50 bar(g), 20°C Volume Dimensions (mm) Weight
inch bar Nm3/h Nm3/m I A B C E Kg
F 02 SPFW 1/2 14 150 2.5 0.84 258 121 76.1 1/8" 2.1
03 SPFW
3/4 14 225 3.75 0.93 282 121 76.1 1/8" 2.3
F 05 SPFW
1 14 315 5.25 1.4 299 136 88.9 1/8" 3.1
F 07 SPFW
1 1/4 14 420 7.0 1.74 368 155 88.9 1/8" 3.4
F 10 SPFW
1 1/2 14 600 10.0 3.4 395 180 114.3 1/4" 4.7
F 15 SPFW
2 14 900 15.0 4.1 464 180 114.3 1/4" 5.3

Innovative features mean outstanding performance without compromise 
PURBERG® filter housings have been developed for high-efficiency removal of solid particles, water, oil aerosols, hydrocarbons, odour vapours from com­pressed air systems. To meet the required com­pressed air quality appropriate filter element (G, F, S, A) must be installed into the filter housing. Housing prevents condensate from being picked up and "car­ried over" into the airstream. The BERG filter technolo­gy guarantees low operating costs, long service life, outstanding process reliability, and safe filtration. 

Water Separator with comprehensive rate and outstanding efficiency
PURBERG® water separator have been developed for high-efficiency removal of bulk liquids from compressed air and vacuum systems up to 20 bar. Inside the housing, there is an insert with vanes that creates a controlled rotation of the air. As a result of centrifugal action liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the filter housing prevents condensate from being picked up and "carried over" into the airstream. To discharge condensate from the F-WW water separator it is essential to install automatic or electronic condensate drain.

BERG High Pressure Filters - high pressure air compressor filtration

PURBERG® HP filter housings are designed for the highly efficient removal of solid particles, water, oil aerosols, hydrocarbons and other vapors from compressed air systems. To achieve the required compressed air quality, a suitable filter element (F, S, A) must be installed in the filter housing.

How do you remove moisture from an air compressor?
The most important methods to remove moisture from compressed air are:
1. Draining tank.
2. water separator and compressed air filters
3. refrigerated air dryer.
4. desiccant or adsorption air dryer.
5. membrane air dryer.
6. Through piping system air drying.
7. With the receiver cooling method.