Oxygen generator analyzer - GMH 3695 with GGO
Product information "Oxygen generator analyzer - GMH 3695 with GGO"
Oxygen Meter for oxygen in gases with integrated temperature and pressure measuring
Oxygen partial pressure sensor in specialized housing
Downloads
Operating Manual GMH 3695, PDF( Size: 1 MB )
Operating Manual, GGO ..., GGA ..., GOO..., GOG / ResOx .., PDF( Size: 800 KB )
Oxygen partial pressure sensor in specialized housing
GMH 3695
The GMH 3695 is measuring oxygen in air and gas mixtures either as partial pressure or as concentration in %vol. For the measuring an external sensor of the type GOO-... or GGO... has to be connected to the MINI-DIN socket. Due to the properties of the sensor, it has to be calibrated regularly (e.g. at fresh air = 20.95%) to get precise values. If the sensor is used up, this will be detected during the calibration, the sensor has to be regenerated or replaced before continuing with measuring. The safety requirements (see below) have to be observed. The device must be used only according to its intended purpose and under suitable conditions. Use the device carefully and according to its technical data (do not throw it, strike it, …) Protect the device from dirt.
Safety guidelines
This device has been designed and tested in accordance with the safety regulations for electronic devices. However, its trouble-free operation and reliability cannot be guaranteed unless the standard safety measures and special safety advises given in this manual will be adhered to when using the device.Application of the sensor types GGO
For measurements at atmosphere and in systems without over or under pressure the GGO is sufficient. Additionally the GGO can be screwed tightly into systems with small over or under pressure. Attention! Mind the maximum pressure and the maximum pressure difference at the membrane. If instrument and sensor pressure are different, please connect the pressure port of instrument to measuring pressure, otherwise it will be compensated wrong!Calibration of the Sensor
In order to compensate for ageing of the sensor, the sensor has to be calibrated at regular intervals. The device is equipped with an easy-to-use calibration functions. We recommend to calibrate the sensor at least all 7 days, or to get maximum precision, before each measuring series.Downloads
Operating Manual GMH 3695, PDF( Size: 1 MB )
Operating Manual, GGO ..., GGA ..., GOO..., GOG / ResOx .., PDF( Size: 800 KB )
Login