METPOINT LKD - leak detector
METPOINT LKD: Fast and reliable leak detection
Are you aware that leakage drives up the energy costs in production? However, leaks often remain undetected for long periods, as one mostly cannot see or hear them. Such undetected leaks slowly become real cost drivers. Remedying leaks provides the highest savings potential in the field of compressed air supply.
Small cause - large effect
Small cause - large effect. Even small leaks can make a big contribution to the costs for compressed air. In total, leakage rates of 30% are not uncommon. In times of rising energy prices, high sums of money therefore “go up in smoke” very quickly. The remedy here is the small and easy-to-use METPOINT LKD Leak Detector. If it is utilised, then the leaks in the system can be located in a short time. Maintenance is therefore targeted accurately and possible at short notice. The METPOINT LKD uses a physical characteristic for this purpose. As compressed air escapes, the gas molecules cause friction along the pipework wall. This friction in turn generates a noise in the ultrasonic frequency range.
The METPOINT LKD leak detection device informs via color display, measured value and acoustic signal. Compact dimensions and easy operation make it quick and usable everywhere.
Technical Data METPOINT LKD
| Measuring range |
40 kHz +/- 1 kHz |
| Bandwidth |
2,5 kHz |
| Optical display |
OLED display, leak signal (digital dial), sensitivity: bar chart and percentage value,
Volume: Bar chart and percentage value, battey charge: Multi-level indicator |
| Signal strength indicator |
digital dial and percentage value |
| Sensitivity |
0 ... 100 % adjustable |
| Headphone socket |
3,5 mm jack socket |
| Headphone volume control |
Adjustable in 10 levels |
| Power supply |
3,7 V Li-ion battery, 1100 mAh |
| Charging time |
2,5 h |
| Battery runtime |
> 40 h |
| Charge indicator |
multi-level indicator |
| Weight |
approx. 250 g |
| Housing |
Aluminium |
| Dimensions |
120 x 70 x 23 mm |
| Operating temperature |
–20 °C ... +60 °C |
| Keypad |
IP51 foil (resistant to oils etc.) |
| Interface |
USB (updatable) |
| Power supply unit |
Input voltage: 90 ... 264 VAC / 47 ... 63 Hz
Output voltage: 5 VDC |
Downloads
Technical Data METPOINT LKD , PDF( Size: 413 KB )
Catalog METPOINT LKD , PDF( Size: 318 KB )
Contact us
E-mail:Kundenservice@berg-kompressoren.de
