Stationary Screw Compressor KOMPBERG BSDK5.5
KOMPBERG BSDK5.5
We are using a large low speed air end for relative small compressors. The electric motor is directly coupled to the main air end rotor, which essentially reduces the maintenance cost, in contrast with the belt driven compressor or a compressor with gear box. Compressor output is controlled either by an on/off switch, depending on the pressure in the air chamber or by classic suction regulator with a new control system depending on the pressure level, or possibly by advanced continuous regulation of operation, which optimises the machine’s performance parameters in real time by smoothly changing revolutions depending on the volume of discharged compressed air.
Technical Data of Stationary Screw Compressor KOMPBERG BSDK5.5
Stationary Screw Compressor |
BSDK 5.5 |
Operation overpressure [bar] min-max |
5 - 9 |
Free air delivery [m3/m] |
0,8 |
Ambient temperature |
+5°C … +40°C |
Voltage,Frequency |
400 V / 50 Hz |
Air end |
BERG B 100 |
Noise level [dB(a)] |
64 - 69 |
Electric motor protection class |
IP 55‐F |
Weight based mounted [kg] |
130 |
Dimensions based mounted (LxBxH) [mm] |
1203 x 450 x 635 |
Nominal motor power [kW] |
5,5 |
Rated amps [A] |
12,1 |
Oil filling [I] |
3,5 |
Oil content in compressed air [mg/m3] |
2 - 4 |
Electric motor speed [min-1] |
1455 |
Receiver [l] |
270 |
Outlet [I] |
G 1/2" |
Downloads
Technical Data Stationary Screw Compressor KOMPBERG BSDK5, PDF( Size: 540 KB )
Stationary Screw Compressor KOMPBERG BSDK5 Operation and maintenance manual, PDF( Size: 600 KB )
Spare parts and maintenance kit Screw Compressor KOMPBERG BSDK 5 (Size: 142 KB )