Screw Compressor KOMPBERG BSD132
Principle operation of KOMPBERG Screw compressors
Ambient air is sucked throgh the filter (1) then it flows through the suction regulator equipped with the varaiable control valve adapting to prompt demand for compressed air. The suction regulator operation is controlled by the electrical unit connected to the pressure sensor. Oil previously treated in the filter (20 is injected into the air compressed in the screw air end (3). The oil ensures lubrication, sealing and cooling of the screw air end. The oil and air mixture is compressed in spaces between the screw impellers and then flows into the oil separator tank (40. where most of the oil is precipitated from the mixture. From the separator tank, air flows through the fine filter (5), minimum pressure valve (60, to the after cooler (7), where it is cooled to a temperature 10°C higher than the ambient temperature.
The oil collected in the oil separator is carried away with the pipe (8) to the screw air end. The oil flow through the after cooler (9) is controlled by the thermostat (10) The suction and oil filters are equipped with the pollution sensors. The airflow through the fan (11) tries to cool the after cooler.
Technical Data of Screw Compressor KOMPBERG BSD132
| Screw compressor |
BSD 132 |
| Overpressure [bar] - options |
7,5 / 10 / 13 |
| Fixed capacity: |
|
| Capacity [m3/m] [ 7,5 bar ] |
23 |
| Capacity [m3/m] [ 10 bar ] |
20.58 |
| Capacity [m3/m] [ 13 bar ] |
16.58 |
| Dimension (LxWxH) [mm] |
3300x1600x1800 |
| Compressed air connection |
G 2 1/2 |
| Weight [kg] |
3200 |
| Ambient temperature (min÷max) [°C] |
+5 ÷ +40 |
| Cooling air demand [m³/h] |
19500 |
| Compressed air temperature on the outlet [°C] |
approx.10 degrees above ambient temperature |
| Sound level L [dB(A)] |
83 |
| Power transmission system |
direct drive |
| Nominal motor power [kW] |
132 |
| Fan motor power [kW] |
5.5 |
| Motor IP Code |
IP 55 |
| Feed voltage [V] |
400 |
| Recommended power feed cable [mm2 ] |
3x150+PE |
| Protection fuse [A] |
315 |
Downloads
Technical Data Screw Compressor KOMPBERG BSD132 , PDF( Size: 185 KB )
Oil injected Screw Compressor Operation and Maintenance of KOMPBERG ( Size: 3 MB )
Spare parts and maintenance kit Screw Compressor KOMPBERG BSD(F)132 (Size: 145 KB )
Catalog Screw Compressor , PDF( Size: 3.8 MB )
Contact us
E-mail:Kundenservice@berg-kompressoren.de
