Refrigeration dryer DRYBERG®️ RF10/AC equals to DRYPOINT®️ RA630/AC
Ambient conditions!
In the event that the dryer is not installed under suitable ambient conditions, the ability of the device to condense refrigerant gas is impaired. This can result in a higher load of the refrigerating compressor, and in a loss of efficiency and performance of the dryer.
This in turn leads to overheated condenser fan motors, to malfunction of electric components and to a breakdown of the dryer. Failures of this type will affect warranty considerations.
Do not install the dryer in an environment in which chemicals with a corrosive effect, explosive gases, toxic gases, evaporation heat, high ambient temperatures or extreme dust and dirt can be found.
Technical Data of Refrigeration dryer DRYBERG® RF10/AC equal to DRYPOINT® RA630/AC
| Refrigeration dryer |
DRYBERG®️ RF10/AC |
| Volume flow (m3/h) at +3 °C |
630 |
| Power consumption (kW) |
1,10 |
| Pressure loss (Δp bar [g]) |
0,13 |
| Air connection (ø) |
G2 BSP-F |
| Dimensions AxBxC (mm) |
975x555x625 |
| Weight (kg) |
94 |
In the case of divergent operating pressure: Divide volume flow by factor
| bar (g) |
4 |
5 |
6 |
7 |
8 |
10 |
12 |
14 |
| Correction factor |
0.77 |
0.86 |
0.93 |
1.00 |
1.05 |
1.14 |
1.21 |
1.27 |
In the case of divergent ambient temperature: Divide volume flow by factor
| °C |
25 |
30 |
35 |
40 |
45 |
50 |
| Correction factor |
1.00 |
0.96 |
0.91 |
0.85 |
0.76 |
0.64 |
In the case of divergent inlet temperature: Divide volume flow by factor
| °C |
25 |
30 |
35 |
40 |
45 |
50 |
55 |
60 |
65 |
70 |
| Correction factor |
1.27 |
1.21 |
1.00 |
0.84 |
0.70 |
0.57 |
0.48 |
0.42 |
Auf Anfrage |
In the case of divergent pressure dew point: Divide volume flow by factor
| °C |
3 |
5 |
7 |
10 |
| Correction factor |
1.00 |
1.09 |
1.19 |
1.37 |
Downloads
Manual DRYBERG®️ RF/AC, PDF( Size: 5 MB )
