Adsorption Dryer DRYBERG ADS196
Versatile installation options for flexible use.
The Adsorption Dryer DRYBERG ADS 126 – ADS 196 is compatible with a wide range of installation layouts and conditions thanks to the multiport. By simply twisting the multiport manifold, the inlet and outlet connections can be adjusted for the air flow. The preloaded desiccant means that the Adsorption Dryer DRYBERG ADS can be installed both horizontally and vertically, so that a total of 20 different installation options are available. Utilising multi-voltage means that the Adsorption Dryer DRYBERG ADS 126 – ADS 196 can be connected directly to any conventional power supply, making it perfectly equipped for worldwide use.
Efficiency and easy maintenance the advantages are on your side
The Adsorption Dryer DRYBERG ADS 126 – ADS 196 provides you with a number of advantages: The energy-saving compressor synchronisation control ensures a significant reduction of the operating costs as no purge air is used when the compressors is not in use.
In addition, the low pressure drop of on average only of just 0.35 bar on average , including optional pre- and after-filter, also reduces energy costs. The constant monitoring and control of the dryer is also exceptionally reliable and cost-effective.
Due to the potential-free alarm contact, the Adsorption Dryer DRYBERG ADS can be connected to a control room for remot monitoring. The Adsorption Dryer DRYBERG ADS is particularly easy to service during regular maintenance checks and when repairs are needed. For example, the cartridges can be replaced quickly, easily and without any mess.
Compact design – impressive quality, efficiency and service
In combination with a optional PURBERG compressed air pre-filter and an optional BEKOMAT, the Adsorption Dryer DRYBERG ADS 126-196 desiccant dryer is a genuine system solution that guarantees maximum safety and performance. By using high-quality desiccant and integrated compressed air after-filtration, the Adsorption Dryer DRYBERG ADS ensures a stable supply of high-quality compressed air. The desiccant is filled into cartridges and removes moisture from the compressed air down to a pressure dew point of -40 °C. With the integrated compressor synchronisation control and the possibility of remote monitoring by means of alarm contacts, this adsorption dryer ensures smooth and efficient production processes and stands out with its flexibility and easy maintenance.
Technical Data
Technical Data
| Ambient temperature | 1.5 … 50 °C |
| Pressure dew point default setting | – 40 °C |
| Air inlet temperature | 1.5 … 50 °C min./max. |
| Pressure range | 4 … 16 bar |
| Volume flow rate range | 17 … 119 m3/h |
| Max. relative humidity |
80 % up to 31 °C, linear decrease to
50 % relative humidity at 50 °C |
| Input voltage range |
AC,100 ... 240 V
... 24 VDC50 ... 60 Hz, 12
Mains voltage may not exceed ±10 % of the
nominal voltage
|
| Protection class | IP 65 |
| Temperature (°C) | 35 | 40 | 45 | 50 |
| Correction factors | 1.00 | 0.88 | 0.67 | 0.55 |
| Operating pressure (bar) | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
|
Pressure correction factors
|
0.63 | 0.75 | 0.88 | 1 | 1.13 | 1.25 | 1.38 | 1.50 | 1.63 | 1.75 | 1.88 | 2 | 2.12 |
| Medium | Compressed air |
| Volume flow rate in m3/h relative to | 20 °C (1 bar [g]) |
| Operating pressure (p1) | 7 bar [g] |
| Compressed air inlet temperature (t1) | 35 °C |
| Inlet humidity | saturated |