Adsorption Dryer DRYBERG ADS191
Adsorption Dryer DRYBERG ADS191
› Integrated compressor synchronisation control for even more efficient operation
› Service-friendly dryer design
› Flow-optimised pre-filter for low pressure losses
Efficiency
› Inlet filtration prolongs the service life› Integrated compressor synchronisation control for even more efficient operation
› Service-friendly dryer design
› Flow-optimised pre-filter for low pressure losses
Technical Data of Adsorption Dryer
| Ambient temperature | 1.5 … 50 °C |
| Pressure dew point default setting | – 40 °C |
| Air inlet temperature | 1.5 … 50 °C min./max. |
| Pressure range | 4 … 16 bar |
| Volume flow rate range | 17 … 119 m3/h |
| Max. relative humidity |
80 % up to 31 °C, linear decrease to
50 % relative humidity at 50 °C |
| Input voltage range |
AC,100 ... 240 V
... 24 VDC50 ... 60 Hz, 12
Mains voltage may not exceed ±10 % of the
nominal voltage
|
| Protection class | IP 65 |
| Temperature (°C) | 35 | 40 | 45 | 50 |
| Correction factors | 1.00 | 0.88 | 0.67 | 0.55 |
| Operating pressure (bar) | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
|
Pressure correction factors
|
0.63 | 0.75 | 0.88 | 1 | 1.13 | 1.25 | 1.38 | 1.50 | 1.63 | 1.75 | 1.88 | 2 | 2.12 |
| Medium | Compressed air |
| Volume flow rate in m3/h relative to | 20 °C (1 bar [g]) |
| Operating pressure (p1) | 7 bar [g] |
| Compressed air inlet temperature (t1) | 35 °C |
| Inlet humidity | saturated |