Adsorption Dryer DRYBERG ADS136
Efficiency and easy maintenance the advantages are on your side
The Adsorption Dryer DRYBERG ADS 126 – ADS 196 provides you with a number of advantages: The energy-saving compressor synchronisation control ensures a significant reduction of the operating costs as no purge air is used when the compressors is not in use.
In addition, the low pressure drop of on average only of just 0.35 bar on average , including optional pre- and after-filter, also reduces energy costs. The constant monitoring and control of the dryer is also exceptionally reliable and cost-effective.
Due to the potential-free alarm contact, the Adsorption Dryer DRYBERG ADS can be connected to a control room for remot monitoring. The Adsorption Dryer DRYBERG ADS is particularly easy to service during regular maintenance checks and when repairs are needed. For example, the cartridges can be replaced quickly, easily and without any mess.
Technical Data of Adsorption Dryer
Ambient temperature |
1.5 … 50 °C |
Pressure dew point default setting |
– 40 °C |
Air inlet temperature |
1.5 … 50 °C min./max. |
Pressure range |
4 … 16 bar |
Volume flow rate range |
17 … 119 m3/h |
Max. relative humidity |
80 % up to 31 °C, linear decrease to
50 % relative humidity at 50 °C
|
Input voltage range |
AC,100 ... 240 V
... 24 VDC50 ... 60 Hz, 12
Mains voltage may not exceed ±10 % of the
nominal voltage
|
Protection class |
IP 65 |
Temperature (°C) |
35 |
40 |
45 |
50 |
Correction factors |
1.00 |
0.88 |
0.67 |
0.55 |
Operating pressure (bar) |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
Pressure correction factors
|
0.63 |
0.75 |
0.88 |
1 |
1.13 |
1.25 |
1.38 |
1.50 |
1.63 |
1.75 |
1.88 |
2 |
2.12 |
Medium |
Compressed air |
Volume flow rate in m3/h relative to |
20 °C (1 bar [g]) |
Operating pressure (p1) |
7 bar [g] |
Compressed air inlet temperature (t1) |
35 °C |
Inlet humidity |
saturated |