BEKOMAT® 32U, BEKO condensate drain

€208.25

Net

€247.82*

% €291.55 * (15% saved)
BEKOMAT® Voltage
Product number: 625.1
Product information "BEKOMAT® 32U, BEKO condensate drain "
BEKO condensate drain BEKOMAT® 32U 

Comfortable and simplified maintenance

A service indicator informs punctually about the upcoming maintenance and/or exchange for the service unit. All parts which are subject to wear or are pressurised can be reached with one manual movement. Neither electrical installations nor the installation of seals and individual parts are necessary. The installation concept is also particularly user-friendly and time-saving: The device only has to be connected once electrically. The robust housing is also waterproof according to IP67. BEKOMAT® 31U | 32U facilitates the connection to the compressed air system with an angle adaptor.
If the service unit of the BEKOMAT® 33U is disconnected from the power supply and condensate receiver tank, then the supply tank always remains connected to the compressed air system. This saves time and effort during maintenance.

 

Technical data of BEKOMAT® 32U

BEKOMAT® BEKOMAT® 32U
Max. compressor performance [m³/min] 5
Max. dryer performance [m³/min] 10
Max. filter performance [m3/min] 50
Voltage 230VAC / 50-60Hz
Operating pressure [bar] 0.8 - 16
Temperature [°C] +1 bis + 60
Condensate feed 1 x G 1/2 
Condensate drain DN 8-10 bzw. G 1/4i
Dimenstions B x T x H [mm] 74 x 179 x 130
Weight [kg] ca. 1,0


Proper use
• The BEKOMAT® 32U is an electronically level-controlled condensate drain for compressed-air plants.
• The device is employed within the permissible performance parameters (see "Technical data").
• The BEKOMAT® 32U is able to drain condensate under operating pressure from the plant components virtually without compressed-air loss.
• For its function, the BEKOMAT® 32U requires a supply voltage and an operating pressure (see "Technical data").
• As far as the employment in plants with increased demands on compressed air is concerned (food industry, medical technology, laboratory equipment, special processes etc.), the operator must decide on measures for the monitoring of the compressed-air quality. These have an effect on the safety of the subsequent processes and may prevent damage to persons and plants.
• It is the task of the operator to ensure that the indicated conditions are met during the entire operating time.

Exclusion from the scope of application
• The BEKOMAT® 32U as a condensate drain alone cannot guarantee a defined compressed-air quality, for this purpose, other additional technical devices are required.
• BEKOMAT® 32U is not suitable for use in plants carrying vacuum or atmospheric ambient pressure or in ex-areas.
• The BEKOMAT® 32U must not be exposed to permanent direct solar or thermal radiation.
• The BEKOMAT® 32U must not be installed and operated in areas with an aggressive atmosphere.
• The BEKOMAT® 32U is not heatable and, therefore, not suitable for the use in areas where frost is likely to occur.
• The BEKOMAT® 32U is not suitable for CO2 plants.



Downloads
Technical Data BEKOMAT® 32U PDF( Size: 186 KB )
Catalog BEKOMAT® 32U , PDF( Size: 368 KB )







0 of 0 reviews

Leave a review!

Share your experiences with other customers.