BEKO condensate drain BEKOMAT® 13 , 230Vac
how can you prevent condensate damage to your compressed air system whilst saving energy and adapted to the amount of condensate without loss of compressed air These are the proven strength of a bekomat but exactly how does it work Adapted to the amount of condensate and without compressed air loss Condensate flows in via the feed line whilst air pressure from the vent pipe keeps the membrane closed from above a capacitive sensor constantly monitors the condensate. When the condensate reaches a preset level the control unit immediately initiates the draining of the condensate. Once again as the condensate flows in the membrane remains closed due to system pressure it's larger upper surface provides the necessary closing force on the valve seat and seals it tightly when the bekomat is full the solenoid valve is activated and the space above the membrane is vented. Simultaneously the pressure on the underside increases allowing the condensate to flow into the outlet line. in actual operation the solenoid valve switches so quickly that no valuable compressed air escapes. The bekomat drains the condensate into the owamat Oil water separator mounted downstream adapted to the amount of condensate and without compressed air loss.
Cost-effective and reliable: BEKOMAT ® standard units
The standard design is made in corrosion-resistant aluminium, which makes the BEKOMAT particularly reliable and robust. A silver-coloured coating protects the outside of the housing. The BEKOMAT CO models are predestined for operating with oil-free or aggressive condensates. Their housing is additionally, completely glass bead blasted and protected by a high-quality hard coating.
Technical data of BEKOMAT® 13
| BEKOMAT® |
BEKOMAT® 13 |
| Max. compressor performance [m³/min] |
30 |
| Max. dryer performance [m³/min] |
60 |
| Max. filter performance [m3/min] |
300 |
| Voltage |
230VAC / 50-60Hz |
| Operating pressure [bar] |
0.8 - 16 |
| Temperature [°C] |
+1 bis + 60 |
| Condensate feed |
2 x G 1/2 |
| Condensate drain |
DN 10-13 bzw. G 1/2i |
| Dimenstions B x T x H [mm] |
93 x 212 x 162 |
| Weight [kg] |
ca. 2,0 |
Measures:
• Do not exceed the maximum operating pressure (see type plate)!
• Only carry out service measures when the system is pressure less.
• Use pressure-resistant installation material only.
• The feed pipe must be tubed firmly. Discharge pipe: short, fixed pressure hose onto pressure-resistant pipe.
• Make sure that persons or objects cannot be hit by condensate or escaping compressed air.
Downloads
Technical Data BEKOMAT® 13 , PDF( Size: 1.5 MB )
Catalog BEKOMAT® 13 , PDF( Size: 430 KB )
Catalog PUREBERG , PDF( Size: 2 MB )
Contact us
E-mail:Kundenservice@berg-kompressoren.de
