Adsorption Dryer DRYBERG® AD210
Adsorption Dryer DRYBERG Switch-over
Once the regeneration process is done the pressure build up in the vessel is started by closing the purge valves. After reaching the operating pressure the air flow is changed from the adsorbing vesel to the freshly regenerated vessel. Adsorption now commences in the freshly regenerated vessel, while the other vessel enters its regeneration cycle.
Technical Data of Adsorption Dryer DRYBERG
Capacity* [m3/m] |
3,5 |
Capacity* [m3/h] |
210 |
Connection [inch] |
1" |
Dimensions (AxBxCxD) [mm] |
1543x853x745x650 |
Weight [kg] |
212 |
Calculated at 1 bar (abs.) and 20°C at 7 bar g operating pressure and 35°C compressed air inlet temperature (saturated condition)
Dew Point - Correction factors |
Operating temperature (°C) |
-25 |
-40 |
-70 |
Correction factors |
1.1 |
1 |
0.7 |
Voltage, frequency |
230V, 50 |
Power consumption |
<60 W |
Protection Class |
IP 65 |
Filter (inlet) |
Superfine - 0.01 µm |
Filter (outlet) |
Dust filter - 1 µm |
Input for stand-by |
standard |
Downloads
Operating Manual of Adsorption dryer DRYBERG® AD 150-1200, PDF( Size: 4.4 MB )
Operating Manual of EVERMATIC 20 Controller, PDF( Size: 2.7 MB )
Contact us
E-mail:Kundenservice@berg-kompressoren.de