Adsorption Dryer DRYBERG® AD20
Adsorption Dryer DRYBERG® AD20
Calculated at 1 bar (abs.) and 20°C at 7 bar g operating pressure and 35°C compressed air inlet temperature (saturated condition)
Is an air dryer necessary?
Definitely yes, Excessive and dense water in your compressed air flow can reduce the quality of your product and in addition cause serious damage and corrosion and rust in equipment and plumbing.Technical Data of Adsorption Dryer
| Capacity* [m3/m] | 0,33 |
| Capacity* [m3/h] | 20 |
| Connection [inch] | 3/8" |
| Dimensions (AxBxCxD) [mm] | 823x735x376x316 |
| Weight [kg] | 20 |
| Inlet volume flow v [m3/h] |
40
|
| Operating pressure [bar] |
6
|
| Inlet temperature [°C] | 40 |
| Operating pressure (bar g) | ||||||||||||||
| 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | ||
|
Inlet
Temp.(°C) |
35 | 0,6 | 0,7 | 0,8 | 1 | 1,1 | 1,2 | 1,3 | 1,5 | 1,5 | 1,6 | 1,6 | 1,7 | 1,7 |
| 40 | 0,5 | 0,6 | 0,7 | 0,8 | 0,9 | 1,1 | 1,2 | 1,3 | 1,4 | 1,5 | 1,6 | 1,7 | 1,7 | |
| 45 | 0,4 | 0,5 | 0,5 | 0,6 | 0,7 | 0,8 | 0,9 | 1 | 1 | 1,1 | 1,2 | 1,3 | 1,4 | |
| 50 | 0,3 | 0,4 | 0,4 | 0,5 | 0,6 | 0,6 | 0,7 | 0,8 | 0,9 | 0,9 | 1 | 1,1 | 1,1 | |